Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
199
Displaying the Status Screens
[Media] Status Screen
NOTES
• Depending on the SD card, the total space displayed on the screen may differ from the nominal capacity listed
on the card.
[Terminal Outputs] Status Screen
* The displayed bit depth refers to the video signal’s bit depth.
4
3
5
1
2
7
6
1 SD card A/SD card B
For each:
2 Visual bar: Approximate used/available space
3 Total space
4 Used (recorded) space
5 Available space
6 SD/UHS speed class
Only for SD card B:
7 Number of remaining photos
2
1
4
3
1 HDMI OUT terminal status: Output signal
(A 146), output onscreen displays (A 146)
2 SDI terminal status: Video output*, 3G-SDI output
mapping (A 145), output onscreen displays
(A 146)
3 Time code output from the HDMI OUT terminal
(A 146)
4 User bit type (A 91)