Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
Specifications
222
Terminals
• SDI Terminal
BNC jack, output only, 0.8 Vp-p / 75 , unbalanced
HD-SDI: SMPTE 292, SMPTE ST 299-1
3G-SDI: SMPTE 424, SMPTE 425, SMPTE ST 299-2
6G-SDI: SMPTE ST 2081
12G-SDI: SMPTE ST 2082
Embedded audio, time code (VITC/LTC)
Supplemental displays (superimposed onscreen displays, peaking, zebra pattern, magnification, waveform
monitor) can also be output.
• HDMI OUT Terminal
HDMI connector, output only
Time code and supplemental displays (superimposed onscreen displays, peaking, zebra pattern,
magnification, waveform monitor) can also be output.
• INPUT Terminals (INPUT 1 and INPUT 2)
XLR 3-pin jack (pin1: shield, pin2: hot, pin3: cold), 2 sets, balanced
Analog Inputs
MIC setting: –60 dBu (volume center, full scale –18 dB) / 600 , microphone attenuator: 20 dB
LINE setting: 4 dBu (volume center, full scale –18 dB) / 10 k
Digital Inputs (AES/EBU)
AES3 standard (48 kHz, 24 bit, 2ch) / 110
•MIC Terminal
3.5 mm stereo mini-jack, –72 dBV (manual volume center, full scale –18 dB) / 5.6 k
Microphone attenuator: 20 dB
•
×
(headphone) Terminal
3.5 mm stereo mini-jack, - to –8 dBV (16 load, volume range Min to Max) / 50 or less
•USB Terminal: mini-B receptacle, Hi-Speed USB, output only
• G-LOCK/SYNC Terminal
BNC jack, 1.0 Vp-p / 75
GENLOCK setting: input only; SYNC OUT setting: output only, tri-level HD signal
• TIME CODE Terminal
BNC jack, input/output
Input setting: 0.5 Vp-p to 18 Vp-p / 100 k;Output setting: 1.3 Vp-p / 50 or less
• REMOTE A Terminal, REMOTE B Terminal
REMOTE A: 2.5 mm stereo sub-mini jack
REMOTE B: Circular 8-pin jack (for the optional RC-V100 Remote Controller, RS-422 interface)
• (Ethernet) Terminal: Ethernet, 1000BASE-T compatible
Power/Others
•Power Supply (rated): 14.4 V DC (battery pack), 24.0 V DC (DC IN)
•Power Consumption (recording using the LCD screen with SDI terminal output enabled (3G-SDI))
XF-HEVC clips, 3840x2160, 160 Mbps: 21.5 W (59.94P), 20.8 W (50.00P)
XF-HEVC clips, 1920x1080, 60 Mbps: 20.6 W (59.94P), 19.9 W (50.00P)
XF-AVC clips, 1920x1080, 45 Mbps: 19.1 W (59.94P), 18.8 W (50.00P)
• Operating Temperature: 0 – 40 °C (32 – 104 °F)