Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
27
Using the Menus
Rearranging Menu Settings
1 Select [Move].
> [¥ My Menu]* > [Edit] > [Move]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Push the joystick up/down to select the setting you want to move and then press SET.
•The
]
icon will appear next to the setting you selected to move.
3 Push the joystick up/down to move the setting to the desired position and then press SET.
Removing Menu Settings
1 Select [Delete].
> [¥ My Menu]* > [Edit] > [Delete]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Push the joystick up/down to select the setting you want to remove and then press SET.
3 Select [OK] and then press SET twice.
Resetting the My Menu Submenu
1 To reset all the menu settings registered to the My Menu set, select [Reset All].
> [¥ My Menu]* > [Edit] > [Reset All]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Select [OK] and then press SET twice.
Renaming the Selected My Menu Set
You can give each of the 5 My Menu sets a more descriptive name to make them easier to identify.
1 Select [Rename].
> [¥ My Menu]* > [Edit] > [Rename]
* Each My Menu set appears on a different page. Select the page that corresponds to the desired set.
2 Enter the desired name (8 characters long) using the keyboard screen.
Using the Virtual Keyboard Screen
The virtual keyboard will appear on the screen. The layout may differ slightly depending on the function.
1Use the joystick to select a character and then press SET to
add it.
• Push the joystick up/down/left/right to select the desired
character and press SET to enter it. Use the arrows (///) to
change the position of the cursor and the backspace character
( ) to delete the last character entered.
• Repeat this step as necessary to enter the desired text.
• Some characters will not be available, depending on the
function.
• Press the CANCEL button to return to the previous screen without entering any text.
2 After entering the desired text, select [OK] and then press SET to close the keyboard screen.
Current character / Character limit