Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
53
Shutter Speed
Shutter Speed
Set the shutter speed based on the recording conditions. For example, you may want to set slower shutter
speeds in darker environments. The camcorder offers the following modes.
OFF: The camcorder uses a standard shutter speed based on
the frame rate. To turn off the shutter adjustment and use the
standard shutter speed, set the SHUTTER switch to OFF.
Automatic: The camcorder automatically adjusts the shutter
speed based on the picture’s brightness.
Speed: Allows you to set the shutter speed (in fractions of a
second). You can select the increment to use when adjusting
the shutter speed between 1/3-stop and 1/4-stop increments.
Angle: You can set the shutter angle to determine the shutter
speed.
Clear Scan: Set the frequency in order to record CRT computer
monitors without displaying black bands or flicker on the
screen.
Slow: You can set slower shutter speeds to obtain brighter recordings in places with insufficient lighting. This
mode is not available when slow motion recording is activated.
Changing the Shutter Speed Mode
You can also perform this function remotely using Browser Remote on a connected network device (A 162,
168).
Set the SHUTTER switch to ON and then slide the switch
toward SEL to change the shutter speed mode.
• Repeatedly pushing the switch toward SEL will change the
shutter speed mode in the following order: Automatic
Speed Angle Clear scan Slow.
Operating modes: