Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
69
Zooming
Selecting the Zoom Controls
Set the ZOOM switch to the desired position to select the
physical controls you want to use to operate the zoom.
Options
RING: Turn the zoom ring to zoom.
ROCKER (other controls):
Use the grip zoom rocker, handle zoom rocker,
supplied wireless controller or a remote
controller connected to one of the camcorder's
REMOTE terminals to zoom.
Using the Zoom Ring
The zoom speed depends on how fast you turn the zoom ring.
1 Set the ZOOM switch to RING.
2 Turn the zoom ring to zoom.
• The zoom ratio is determined by the position of the zoom
ring.
NOTES
NOTES
• When you change the ZOOM switch's position from ROCKER
to RING, the camcorder will zoom automatically to the focal
length indicated by the current position of the zoom ring.
• You can operate the zoom ring even when the camcorder's
controls are locked (A 43).
Using the Grip Zoom Rocker
You can set the zoom speed of the grip zoom rocker using the menu.
With the [User Setting] you can even customize a zoom speed pattern
depending on how much you press on the zoom rocker (A 70).
1 Set the ZOOM switch to ROCKER.
2 Move the zoom rocker toward T to zoom out (wide-angle) and
toward S to zoom in (telephoto).