Owner's Manual

Table Of Contents
73
Using Optional Conversion Lenses
Using Optional Conversion Lenses
You can use the following optional conversion lenses with this camcorder. Before you attach a conversion lens,
perform the procedure below to optimize the autofocus and minimum object distance for the particular
accessory.
1 Select [Conversion Lens].
> [v'Camera Setup] > [Conversion Lens]
2 Select [TL-U58] or [WA-U58] and then press SET.
The image stabilization method, minimum focusing distance and the approximate distance to the subject
displayed on the screen will change depending on the conversion lens selected.
Select [Off] if you do not intend to use a conversion lens.
NOTES
NOTES
Vignetting may occur when taking wide angle shots with the optional TL-U58 Tele-converter.
Operating modes:
Optional Conversion Lens Focal Length Factor Minimum Focusing Distance
TL-U58 Tele-converter Approx. 1.5x Approx. 130 cm (4.3 ft.) throughout the zoom range
WA-U58 Wide Attachment Approx. 0.8x Approx. 60 cm (2.0 ft.) throughout the zoom range