Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
77
Adjusting the Focus
Push AF
Press and hold the PUSH AF button.
The camcorder will focus automatically using the highest AF
speed and AF response as long as you hold the PUSH AF
button pressed down.
NOTES
NOTES
• The focus will be locked in the following cases.
-When > [
v
$ Camera Setup] > [Face AF] is
set to [Face Only] and no face is detected.
-When > [
v
# Camera Setup] > [AF Mode] is
set to [AF-Boosted MF] and the focus is the manual
adjustment range.
• When the AF mode cannot be selected (A 78), Push AF (autofocus at the highest speed) is not available
either.
AF-Boosted MF
In this focus mode, you can focus manually most of the way
and let the camcorder finish focusing automatically. This is very
convenient when you want to make certain that your 4K
recordings are in sharp focus.
Additionally, with this mode, if the camcorder cannot evaluate
how to adjust the focus, it will not perform unreliable focus
adjustments. This results in an overall more stable focusing
operation than with continuous AF.
1 Set the FOCUS switch to A.
• @ appears on the left of the screen.
2 Set [AF Frame] to a setting other than [Automatic]
(steps 1-2, A 79).
3 Select [AF Mode].
> [
v
# Camera Setup] > [AF Mode]
4 Select [AF-Boosted MF] and then press SET.
• When the focus is in the manual adjustment range, the focus frame will appear in yellow.
5 If necessary, change the size and position of the AF frame (A 79).
6 Turn the focus ring to adjust the focus.
• Focus manually to bring the subject closer into focus. When the focus enters the automatic adjustment
range, the focus frame will turn white and the camcorder will then finish focusing automatically.
• While the focus stays within the automatic adjustment range, the camcorder will keep the subject in focus
automatically.