Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
95
Recording Audio
Recording Audio
The camcorder features 4-channel linear PCM audio recording and playback. The sampling frequency is 48 kHz
and the audio sampling bit depth is 24 bit. You can record audio using the INPUT terminals (commercially
available microphones, analog line-in audio sources, AES/EBU digital audio sources), the MIC terminal
(commercially available microphones) or the built-in microphone.
An audio signal will also be output with the video signal from the SDI terminal and HDMI OUT terminal. You can
record this audio signal on an external recorder.
Audio Settings and Recorded Audio Channels
Which audio inputs are recorded to which audio channels is determined by a combination of menu settings and
audio-related controls on the camcorder. Refer to the illustration below and the table on the next page.
Operating modes:
INPUT 1 switch
(audio input selection)
INPUT 1 terminal's
ANALOG switch (analog
audio source selection)
INPUT 2 switch
(audio input
selection)
INPUT 2 terminal's
ANALOG switch (analog
audio source selection)