Owner's Manual
Table Of Contents
- Instruction Manual
- Highlights of the XF705
- Table of Contents
- Introduction
- Preparations
- Recording
- Recording Video
- Video Configuration: Video Format, System Frequency, Frame Rate, Resolution and Bit Rate
- Changing Main Functions with the FUNC Button
- Shutter Speed
- Gain
- ND Filter
- Aperture
- Gamma Curve and Main Color Settings
- White Balance
- Zooming
- Using Optional Conversion Lenses
- Adjusting the Focus
- Image Stabilization
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- Setting the User Bit
- Synchronizing with an External Device
- Recording Audio
- Audio Settings and Recorded Audio Channels
- Connecting an External Microphone or External Audio Input Source to the Camcorder
- Setting the Audio Input Type for the INPUT 1/INPUT 2 Terminals
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Waveform Monitor
- Adding Marks to Clips while Recording
- Using Metadata
- Recording GPS Information (Geotagging)
- Reviewing a Recording
- Special Recording Modes
- Infrared Recording
- Customization
- Playback
- External Connections
- Network Functions
- Photos
- Additional Information
99
Recording Audio
2 Select the desired option and then press SET.
Options
[INPUT 2]: Records audio to each channel separately. Audio input into INPUT 1 is recorded to CH1, while
audio input into INPUT 2 is recorded to CH2.
[INPUT 1]: Audio input into INPUT 1 is recorded to both channels. Audio input into INPUT 2 will not be
recorded.
Adjusting the Audio Recording Level
You can adjust the audio recording level of analog audio sources from the INPUT terminals, external
microphones connected to the MIC terminal and the built-in microphone. For the INPUT terminals (analog
sources) and MIC terminal, you can set the audio recording level to automatic or manual adjustment
independently for each channel or for CH1/CH2 and CH3/CH4 as a set*.
The audio recording level of digital audio sources (AES/EBU) from the INPUT terminals cannot be adjusted.
The audio recording level of the built-in microphone can only be adjusted for a pair of channels (CH1/CH2 or
CH3/CH4) as a set.
* Requires linking the audio level adjustment (ALC) of CH1/CH2 or CH3/CH4 (A 100).
Automatic Audio Level Adjustment for
CH1 or CH2
Set the
–
(audio level) switch of the desired
channel to A (automatic) to let the camcorder
automatically adjust that channel’s audio level.
Operating modes:
CH1/CH2
–
(audio level) switches