All in One Printer User Manual

Finisher-AE1/Saddle Finisher-AE2/Puncher Unit-M1
3-37
3
Optional Equipment
■ Hole Punch Mode
The Hole Punch mode punches two or three holes (depending on the paper size) in the
printed sheets.
NOTE
• The hole punched areas are shown in the illustration below.
• The distance between the punch holes is shown in the illustration below.
IMPORTANT
• Only the following paper sizes can be hole punched: 11" x 17", LGL, LTR, or LTRR.
• Holes cannot be punched in transparencies, envelopes, pre-punched paper, tracing
paper, or labels.
• The machine automatically selects how many holes to punch depending on the selected
paper size.
- Two holes: LGL, LTRR
- Three holes: 11" x 17", LTR
Platen Glass
Hole
Punched
Area
Hole
Punched
Area
Hole
Punched
Area
Hole
Punched
Area
Feeder
4 1/4"
(108 mm)
4 1/4"
(108 mm)
2 3/4"
(70 mm)
Three Holes Two Holes