All in One Printer User Manual

Routine Cleaning
7-57
7
Routine Maintenance
Automatic Feeder Cleaning
If your originals have black streaks or appear dirty after scanning them through the
feeder, clean the rollers of the feeder.
IMPORTANT
This procedure is necessary only if the optional Feeder (DADF-N1) (standard-equipped
for the imageRUNNER 3045/3035) is attached.
NOTE
It takes approximately 20 seconds to clean the feeder.
1 Press (Additional Functions) ➞ [Adjustment/Cleaning] ➞
[Feeder Cleaning].
2 Place 10 sheets of blank paper into the feeder ➞ press [Start].
Make sure that you fan the sheets of paper well.
Use LTR paper (16 to 20 lb bond (60 to 80 g/m
2
)).
When cleaning is complete, try scanning again.
NOTE
To cancel feeder cleaning while it is in progress, press [Cancel].