Advanced User Guide
z : Manual
z When the ISO speed is xed, you can compare your specied value
(where the exposure level indicator moves) to the standard exposure
level by pressing the shutter button halfway. The exposure level indicator
appears as [
] or [ ] when the dierence from standard exposure
exceeds 3 stops.
z After you set the shutter speed and aperture value, the exposure level
indicator may change if you adjust the zoom or recompose the shot.
z When the ISO speed is xed, screen brightness may change depending
on your specied shutter speed and aperture value. However, screen
brightness remains the same when the ash is up and the mode is set to
[
].
z Exposure may not be as expected when the ISO speed is set to [AUTO],
because the ISO speed is adjusted to ensure standard exposure relative to
your specied shutter speed and aperture value.
z Image brightness may be aected by Auto Lighting Optimizer. To keep the
Auto Lighting Optimizer disabled in
mode, add a [ ] mark to [Disable
during man expo] on the Auto Lighting Optimizer setting screen.
z Calculation of standard exposure is based on the specied metering
method.
z To adjust exposure when ISO speed is set to [AUTO], turn the exposure
compensation dial.
93