Owner's Manual

159
Long (Bulb) Exposures
o
With [
z
5: Long exp. noise reduction], you can reduce the noise
generated during long exposures (p.107).
o
For bulb exposures, using a tripod and bulb timer is recommended.
o
You can also shoot bulb exposures by using Remote Switch RS-60E3
(sold separately, p.176).
o
You can also use Wireless Remote Control BR-E1 (sold separately,
p.174) for bulb exposures. When you press the remote control’s
transmit button, the bulb exposure will start immediately or 2 sec. later.
Press the button again to stop the bulb exposure.
Bulb Timer
M
You can preset the bulb exposure’s exposure time. The bulb timer
eliminates the need to keep holding down the shutter button during the
bulb exposure. This reduces camera shake.
The bulb timer can be set only in the [BULB] (bulb exposure). It cannot
be set (or will not function) in any other mode.
1
Select [
z
6: Bulb timer].
2
Select [Enable].
z
Select [Enable], then press the
<
B
> button.
I
0 I • 'r' " •
6 '
Bulb t imer Disab le
Anti flicker shoot Disable
Silent shutter
O FF
Silent LV shoot Mode 1
Bulb timer
Enable
Expo time 00 00 01
lmEJ Deta 11 set ~ OK