User Guide
592
Troubleshooting Guide
The image is out of focus or blurred.
●Set the lens’s focus mode switch to <
AF
> (p.50, 53).
●Press the shutter button gently to prevent camera shake (p.56).
●With a lens equipped with an Image Stabilizer, set the IS switch to
<
1
>.
●In low light, the shutter speed may become slow. Use a faster
shutter speed (p.134), set a higher ISO speed (p.83), use ash
(p.177), or use a tripod.
●See “Minimizing Blurred Photos” on page 124.
I cannot lock the focus and recompose the shot.
●Set the AF operation to One-Shot AF. Shooting with the focus
locked is not possible with Servo AF (p.126, 262).
The continuous shooting speed is slow.
●The continuous shooting speed for high-speed continuous shooting
may be lower, depending on conditions such as these: battery
level, temperature, icker reduction, Dual Pixel RAW shooting,
Silent LV shooting, shutter speed, aperture, subject conditions,
brightness, AF operation, type of lens, use of ash, and shooting
settings (p.144).