User Manual
585
Using a Battery Grip
Using a Flash with a PC Sync Cord
z
The PC terminal enables you to use
ash units with a PC sync cord.
z
The PC sync cord can be used
regardless of polarity.
z
When conguring settings, use
approx. 1/60–1/30 sec. as a guideline
for sync speed. Conrm in advance
that the ash unit is synced correctly.
Do not connect ash units with an output voltage of 250 V or more to the
PC terminal.
You can use one ash unit attached to the camera’s hot shoe and another
connected to the PC terminal at the same time.