Owner's Manual

238
Shooting Movies Set to Canon Log
z
Canon Log
z
On (8bit)
Select when recording movies with
Canon Log to the card. Also enables
you to record to an external device
via HDMI. Recording quality via HDMI
switches automatically based on the
[
z
1: Movie rec quality] setting.
On (10bit)
Select for 10-bit 4K (3840×2160) recording via HDMI to an
external device that supports 10-bit recording in 4K. Movies
cannot be recorded to the card. [
z
4: HDMI display] is
automatically set to [
A
+
a
].
o
No HDMI output is produced by the camera when set to [On (10bit)] if
the external recording device does not support 10-bit recording in 4K.
If there is no video output, conrm that the external recording device
supports the signals.
o
Full HD and HD output is not available when set to [On (10bit)].
o
Pressing the movie shooting button (p.209) will not start movie
recording if you are shooting still photos in a mode other than [
A
] and
[On (10bit)] is set for [
] (movie C3) mode.
YCbCr 4:2:0 (8-bit) color sampling and the Rec. ITU-R BT.709 color space
are used when recording with Canon Log to the card, just as in regular
movie shooting.
Canon Log
On(Sblt)
On {8bit) On (1 Obit)
Gm) Help Em! OK