Owner's Manual

387
Checking the Battery Information
You can check the conditions of the battery you are using. By
registering multiple batteries to the camera, you can check their
approximate remaining capacity and usage history.
(1) (2)
(3)
(4)
(5)
Select [
5
3: Battery info.].
(1) Battery position
(2) Battery model or household power
source being used.
(3) The battery level indicator (p.40) is
displayed together with the remaining
battery level shown in 1% increments.
(4) The number of shots taken with the
current battery. The number is reset
when the battery is recharged.
(5) Battery’s recharge performance level
is displayed in three levels.
(Green) :
Battery’s recharge performance is
good.
(Green) :
Battery’s recharge performance is
slightly degraded.
(Red) :
Purchasing a new battery is
recommended.
Using a genuine Canon Battery Pack LP-E6N/LP-E6 is recommended. If
you use batteries that are not genuine Canon products, the camera’s full
performance may not be attained or malfunction may result.
o
The shutter count is the number of still photos taken. (Movie shooting is
not counted.)
o
The battery information will also be displayed when using Battery Grip
BG-E22 (sold separately).
o
If a battery communication error message is displayed, follow the
instructions in the message.
CJ I \' " •
3 ''
Video system For NTSC
Touch control Standard
Beep Enable
J Battery info I
Sensor cleaning
HD MI resolution Auto
HDM I HDR output Off
ttery info.
Q P-E6N
Remaining cap. (!!!!I 93%
Shutter count 25
Recharge performance □ □ □
□
I
□ D
□ DD