User Manual

● Do not for
get your PIN.
● Y
ou cannot register an ID or PIN that consists only of zeros, such as "00" or
"0000000."
4
Select <Yes>.
● If you select <No>, a Remote UI Access PIN is not set, and the Setup Guide
proceeds to step 4.
5
Specify the Remote UI Access PIN.
● Enter a PIN, and select <Apply>.
● The Conrm screen is displayed. Enter the PIN once again to conrm.
● Do not for
get your PIN.
● Y
ou cannot register a PIN that consists only of zeros, such as "00" or "0000000."
For MF743Cdw / MF741Cdw / MF644Cdw / MF642Cdw / MF641Cw
1
Select <Yes> <Yes>.
● If you select <No> in any of the scr
eens, the settings required for using the
Remote UI are not congured, and the Setup Guide proceeds to step 4.
2
Specify the Remote UI Access PIN.
● Enter a PIN, and select <Apply>.
● The Conrm screen is displayed. Enter the PIN once again to conrm.
● Do not for
get your PIN.
● Y
ou cannot register a PIN that consists only of zeros, such as "00" or "0000000."
Step 4 Performing the Color Adjustment
To achieve good copy quality, adjust the gradation.
1
Select <Yes>.
● If you select <No>, color adjustment is not performed, and the Setup Guide
pr
oceeds to step 5.
2
Check that the size and type of paper displayed on the screen is loaded in the
machine, and select <OK>.
3
Conrm the procedure, and select <Start>.
➠ An adjustment image is printed.
4
Open the feeder after the screen displayed during printing is closed.
5
Place the adjustment image on the platen glass.
Setting Up
11