User Manual

6
When the target operation is completed, then select <Disconnect>.
◼ Connecting Using the NFC (Andr
oid)
Before using the NFC, check whether <Use NFC> is set to <On>.
<Use NFC>(P. 592)
1
Select <Mobile Portal> in the Home screen. Home Screen(P. 126)
● When any mobile de
vice is already connected, proceed to step 3.
2
Select <Connect>.
3
Launch Canon PRINT Business on the mobile device.
Utilizing the Machine through
Applications
(P. 341)
4
Enable the NFC settings of the mobile device.
5
Move the mobile device closer to the NFC mark of the machine.
Operation
Panel(P
. 115)
6
When the target operation is completed, then select <Disconnect>.
● Select <Connection Information> on the <Direct Connection> screen to check the connected mobile device.
● When <Keep Enabled If SSID/Ntwk Key Spcfd> is set to <On>, it is not necessary to perform the operation of
selecting <Connect>. <Keep Enabled If SSID/Ntwk Key Spcfd>(P. 473)
● While connecting via dir
ect connection, you may not be able to connect to the Internet depending on the
mobile device you are using.
Linking with Mobile Devices
339