User Manual

<Select Access Point>
Wir
eless LAN routers that can access the machine are automatically located, so you can select from the list.
You must manually enter a network key, such as a WEP key or a PSK.
Setting Up Connection by Selecting
a Wir
eless Router(P. 26)
<Enter Manually>
Select to congure a wireless connection by manually entering an SSID. By using this method, you can specify
authentication and encryption settings in detail.
Setting Up Connection by Specifying Detailed
Settings
(P. 29)
<Security Settings>
<None>
<WEP>
<Open System>
WEP Key 1 to 4
<Shar
ed Key>
WEP Key 1 to 4
<WPA/WPA2-PSK>
<Auto>
<AES-CCMP>
<WPS Push Button Mode>
Select to automatically congure a wireless connection by using the button on a WPS wireless router. Setting
Up Connection Using WPS Push Button Mode(P. 22)
<WPS PIN Code Mode>
Select to congure a wireless connection by entering a PIN code for a WPS wireless router. Setting Up
Connection Using WPS PIN Code Mode(P. 24)
<Power Save Mode>
Select whether or not the machine enters Power Save Mode based on signals emitted from the wireless router.
<Off>
<On>
<Menu> <Preferences> <Network> <Wireless LAN Settings> Read the displayed
message
<OK> <Power Save Mode> Select <Off> or <On>
<Connection Information>
*1
Select to view the current wireless LAN settings. Viewing Network Settings(P. 40)
<MAC Address>
<Wir
eless LAN Status>
<Latest Error Information>
<Channel>
<SSID Settings>
<Security Settings>
<Power Save Mode>
Setting Menu List
472