User Manual
<Off>
<On>
<Menu> <Preferences> <Network> <Use Dedicated Port> Select <Off> or
<On> <OK> Restart the machine
<Dedicated Port Auth. Method>
Specify whether to limit the authentication method specically to the secure one when using the dedicated port. If
<Mode 2> is selected, the authentication method is limited specically to the secure one.
<Mode 1>
<Mode 2>
<Menu> <Preferences> <Network> <Dedicated Port Auth. Method> Select <Mode 1> or
<Mode 2>
● If <Mode 2> is selected, you cannot establish a connection fr
om the device management software or driver
in some cases.
<Wait Time for Conn. at Startup>
Specify a wait time for connecting to a network. Select the setting depending on the network envir
onment.
Setting a
W
ait Time for Connecting to a Network(P. 57)
0
to 300 (sec.)
<Ethernet Driver Settings>
Select the Ethernet type (10B
ASE-T/100BASE-TX/1000BASE-T) and the communication mode of Ethernet (half-duplex/
full-duplex). You can also view the MAC address for wired LAN.
<Auto Detect>
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Conguring Ethernet Settings(P
. 54)
<Off>
<Communication Mode>
<Half Duple
x>
<Full Duplex>
<Ethernet T
ype>
Setting Menu List
482