User Manual
<10BASE-T>
<100BASE-TX>
<1000B
ASE-T>
<On>
● When <Communication Mode> is set to <Half Duple
x>, you cannot select <1000BASE-T>.
<MAC Address>
Check the MAC address of the machine, which is a number unique to each communication device. Viewing
the MA
C Address for Wired LAN(P. 40)
<Use IEEE 802.1X>
*1*2
Enable or disable IEEE 802.1X authentication.
Conguring IEEE 802.1X Authentication Settings
(P. 407)
<Off>
<On>
<Menu> <Preferences> <Network> <Use IEEE 802.1X> Select <Off> or <On>
<OK> Restart the machine
<Firewall Settings>
Without pr
oper security, unauthorized third parties can access computers and other communication devices that are
connected to a network. To prevent this unauthorized access, specify the settings for packet lter, a feature that
restricts communication to devices with specied IP addresses or MAC addresses.
<IPv4 Address Filter>
Enable or disable settings for ltering pack
ets sent to or received from devices with specied IPv4 addresses.
Specifying IP Addresses for Firewall Settings(P. 380)
<Outbound Filter>
<Off>
<On>
<Inbound Filter>
<Off>
<On>
<Menu> <Preferences> <Network> <Firewall Settings> <IPv4 Address Filter> Select
<Off> or <On> in <Outbound Filter> or <Inbound Filter> <Apply> <OK> Restart the machine
Setting Menu List
483