User Manual

● If a higher le

vel is specied, the printing speed will be slower.

If the xing assembly is dirty

, edges or the back side of the paper may get smudged. You can congure to

perform automatic cleaning of the xing assembly to prevent smudges. When <On> is specied, a sheet of

paper is output each time cleaning is performed. Congure so that paper feed is performed from the paper

source in which paper usable for cleaning is loaded.

<Off>

<On>

<Multi-Purpose T

ray>

<Off>

<On>

<Off>

<On>

<Off>

<On>

<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special Processing> <Auto

Clean Fixing Assembly> <On> <Yes> Set available paper sources to <On> <Apply>

● Y

ou can use the following paper for cleaning.

- Paper sizes: A4/Letter

- Paper types: Plain 1 to 3/Recycled 1 or 2

<Rdc. Condens. (1-Sd->2-Sd Prt)>

When performing 2-sided printing after 1-sided printing, the printed images may be faint due to moisture

condensation. In this case, setting to <On> may solve the problem.

<Off>

<On>

<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special Processing> <Rdc.

Condens. (1-Sd->2-Sd Prt)> <On> <Yes>

Setting Menu List

496