User Manual
<Mode 2>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special Processing> <Auto
Detect B&W/Color Orig.> Select the mode <Yes>
<Mode 1>
Prioritizes the print speed when printing.
<Mode 2>
Reduces the toner usage of toner cartridges when printing.
<Rdc. Faint Print After Rplc. Cart.>
Printouts may be faded immediately after replacement of toner cartridges with new ones. In this case, setting
this item to <On> may solve the problem.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special Processing> <Rdc.
Faint Print After Rplc. Cart.>
<On> <Yes>
● If you set to <On>, the setting will become effective with ne
xt replacement of toner cartridges.
● Immediately after cartridge replacement, a certain amount of time is required for toner to be evenly
distributed inside the cartridge.
<Remove Streaks from Scan Area>
*
Y
ou can congure a setting to prevent stains from being scanned when they are detected in the document feed
scanning area. Selecting <On> removes streaks generated by the edge of the original.
<Off>
<On>
Setting Menu List
502