User Manual

<TX Start Speed>
If it takes a long time to start sending a fax, such as when there is a poor connection, you can adjust the
communication start speed do
wnward incrementally.
<33600 bps>
<14400 bps>
<9600 bps>
<7200 bps>
<4800 bps>
<2400 bps>
<Menu> <Function Settings> <Send> <Fax Settings> <TX Start Speed> Select the
communication start speed
<Archive TX Document>
*3
In addition to the destination specied when the fax is sent, you can specify whether fax
ed documents are
also sent to a preset storage address for archiving.
Saving a Copy of a Sent Original(P. 242)
<Archive TX Document>
<Off>
<On>
<Ar
chive Address>
<File Name>
<Conrm Enter
ed Fax Number>
Select whether to display the details of an entered coded dial number when it is selected as a destination.
Conrming the Enter
ed Fax Number(P. 418)
<Off>
<On>
<Allow Fax Driver TX>
Enable or disable PC faxing (sending faxes from a computer). Restricting Fax Sending from a
Computer(P
. 418)
<Off>
<On>
<Use Addr. Book When On-Hook>
Make a setting so that you can perform fax transmission by entering a specic number before specifying a
coded dial number or specifying a destination from the Address Book.
<Do Not Allow After Num. Key Use>
<Always Allow>
Setting Menu List
569