User Manual

Cleaning the Fixing Assembly
3S1Y-09S
If the xing assembly is dirty
, the printout may get smudged. To clean the xing assembly, perform the following
procedure. Note that you cannot clean the xing assembly when the machine has documents waiting to be printed. To
clean the xing assembly, you need plain A4 or Letter size paper. Set the paper in the paper drawer or multi-purpose
tray before performing the following procedure.
Loading Paper(P. 143)
For MF746Cdw / MF745Cdw / MF743Cdw / MF741Cdw(P. 610)
For MF644Cdw / MF642Cdw / MF641Cw(P. 611)
Prior to performing cleaning, mak
e sure that there remains a sucient amount remaining in the toner
cartridges.
Checking the Remaining Amount of Consumables(P. 618)
For MF746Cdw / MF745Cdw / MF743Cdw / MF741Cdw
Ther
e are two ways of cleaning, from which you should choose one depending on how the paper is smudged. To clean
the xing assembly, rst perform <Clean Fixing Assembly (Reduce Paper Back Side Stain)>. If this results in no effect,
then try <Clean Fixing Assembly>.
Clean Fixing Assembly (Reduce Paper Back Side Stain)
Cleaning will be mor
e effective if it is performed about one hour after completion of the previous printing
session.
You can also congure so that cleaning is automatically performed in effective timing.
<Auto Clean Fixing
Assembly>
(P. 496)
1
Select <Menu> in the Home screen.
Home Screen(P. 126)
2
Select <Adjustment/Maintenance> <Maintenance>.
3
Select <Clean Fixing Assembly (Reduce Paper Back Side Stain)>.
4
Check that the size and type of paper displayed on the screen is loaded in the
machine, and select <OK>.
5
Select <Start>.
Cleaning starts. When a message appears notifying that cleaning is complete, pr
ess
to return to the
Home scr
een.
Maintenance
610