Installation guide

Replacing the Toner Cartridge
2-51
2
Routine Maintenance
2 Lift up the locking lever until it becomes vertical.
Make sure that the (down arrow) on the locking lever is aligned with the (up arrow) of the
(Unlock) icon position before proceeding.
3 Pull the toner cartridge out of the toner supply port.
Pull the toner cartridge out halfway, and then remove it completely while supporting it and keeping it
straight with your other hand from underneath.
Do not burn or throw used toner cartridges into open flames, as this may cause the toner
remaining inside the cartridges to ignite resulting in burns or a fire.
If the toner cartridge cannot be pulled out, check that the knob is turned all the way to the
appropriate position.