Installation guide

List of Error Messages
3-95
3
Troubleshooting
# 099
Cause Copying/printing was interrupted.
Remedy Try copying/printing again.
# 701
Cause 1 The specified Department ID does not exist, or the password has changed.
Remedy Enter the correct Department ID or password using
- (numeric keys) on the control panel,
and try again.
Cause 2 The Department ID or password was changed while the machine was processing a job.
Remedy Change the Department ID and password, and try again. If you do not know the password, contact
your System Manager.
Cause 3 <Allow Printer Jobs with Unknown IDs> is set to 'Off'.
Remedy Remedy Set <Allow Printer Jobs with Unknown IDs> to 'Off'. (See e-Manual > Security.)
# 703
Cause 1 The hard disk is full, and no more images can be scanned.
Remedy 1 Wait a few moments, and try scanning again after the current send jobs complete.
Remedy 2 Erase documents stored in inboxes. If the machine still does not operate normally, turn the main
power OFF, and then back ON again. (See “Main Power and Control Panel Power,” on p. 1-14.)
#711
Cause The inbox memory is full.
Remedy Erase unnecessary documents stored in the inbox.(See e-Manual > Mail Box, Send/Fax.)
# 712
Cause The maximum number of documents are already stored in the inbox.
Remedy Erase unnecessary documents stored in the inbox.(See e-Manual > Mail Box, Send/Fax.)