Installation guide

List of Error Messages
3-97
3
Troubleshooting
# 825
Cause 1 The Department ID and password set on the host machine do not match those registered in the
remote copy printers.
Remedy 1 Register your Department ID and password in the remote copy printers.
Remedy 2 Use a remote copy printer in which your Department ID and password are registered.
Cause 2 Reserved or current print jobs cannot be performed in the remote copy printer because the
Department ID and password have been deleted, or the password has been changed.
Remedy Contact your System Manager, or make sure that the Department ID and password set in the host
machine match the ones registered in the remote copy printer.
# 849
Cause Device information could not be delivered because the client machine is processing a job.
Remedy Try delivering device information again after the client machine finishes processing the job.
# 850
Cause Device information could not be delivered because a screen relating to the delivered device
information is being displayed.
Remedy Try delivering the device information again after the screen is cleared from the client machine.(See
e-Manual > Security.)
# 851
Cause 1 There is insufficient memory remaining in the system.
Remedy Check the system's available memory, and delete any unnecessary documents stored in
inboxes.(See e-Manual > Mail Box.)
Cause 2 The machine's memory is full.
Remedy Erase unnecessary documents and documents with errors from memory to increase the amount
of available memory. (See e-Manual > Mail Box, Send/Fax.)
Cause 3 The scanned document cannot be stored because there are more than 2,000 documents in the
specified inbox.
Remedy If there are a large number of documents, delete the unnecessary ones from the specified
inbox.(See e-Manual > Mail Box.)