Installation guide

Service Call Message
3-105
3
Troubleshooting
Service Call Message
If a malfunction occurs and the machine cannot operate normally, a screen like the one shown below
is displayed. Follow the instructions that appear on the touch panel display.
Contacting Your Local Authorized Canon Dealer
If a message like the one shown below appears, follow the procedure described below.
Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock.
Always grasp the power plug when disconnecting the power cord. Pulling on the power cord may
expose or snap the core wire, or otherwise damage the power cord. If the power cord is damaged,
this could cause current to leak, resulting in a fire or electrical shock.
If you turn OFF the main power switch when there is a job waiting to print, that job is erased.