Installation guide

Main Power and Control Panel Power
1-20
1
Before You Start Using This Machine
Do not initiate the Shutdown mode while fonts are being downloaded.
You can also force the machine into the Shutdown mode by pressing (Additional Functions) → [Common
Settings] → [ Shutdown Mode].
You cannot force the machine into the Shutdown mode in the following cases:
When the machine is receiving and updating device information
When the machine is browsing device information
When the machine is importing or exporting data using the Remote UI function
In a rare instance, the machine may not go into the Shutdown mode even if you press and hold the control
panel power switch for more than three seconds. In this case, follow the instructions on the touch panel
display to turn OFF the main power.
If print data is sent while the machine is in the Shutdown mode, the machine may receive the data,
depending on the print data's size. However, the print data is not printed.
2 Confirm the jobs currently being processed or waiting to be processed →
press [Start].
Jobs continue to be processed until [Start] is pressed.
To cancel the Shutdown mode, press [Cancel].
If there are no current jobs, proceed to step 4.
•
•
-
-
-
•
•