Installation guide

Paper Deck-Q1 (Optional)

2-12

Routine Maintenance

Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight.

Do not load the following types of paper into the paper deck. Doing so may cause a paper jam.

Severely curled or wrinkled paper

Thin straw paper

Transparencies

Paper which has been printed on using a thermal transfer printer (Do not print on the reverse side of this

paper either.)

For high-quality printouts, use paper recommended by Canon.

Before loading paper, always fan the sheets several times, and align the edges to facilitate feeding.

Load the paper stack into the paper deck.

Make sure that the inside lifter has lowered before loading paper, and even out the edges of the paper

stack.

•