Installation guide

Envelope Feeder Attachment-C2 (Optional)

2-15

Routine Maintenance

Do not load the following types of envelopes inside the envelope cassette. Doing so may cause paper jams, dirty

prints, or make the inside of the machine dirty.

Curled, creased, or folded envelopes

Very thick or thin envelopes

Damp or wet envelopes

Torn envelopes

Irregularly shaped envelopes

Envelopes with clasps or windows

Envelopes that have already been sealed

Envelopes with holes or perforations

Envelopes with specially coated surfaces

Envelopes made of surface treated coloured paper

Envelopes that are self-sticking, which use ink, glue, or other substances that can melt, burn, vaporize, or emit

smells under the heat of a fixing unit (approximately 418°F).

If the optional Copy Tray-J1 and Finisher-S1 are attached, envelopes are output to any output tray other than the

Copy Tray-J1, even if the Copy Tray-J1 is designated as the output tray destination.

If the optional Copy Tray-J1 and Inner 2 Way Tray-D1 are attached, envelopes are output to any output tray other

than the Copy Tray-J1, even if the Copy Tray-J1 is designated as the output tray destination.

If you are printing on envelopes, empty the output tray when up to 10 printed envelopes accumulate in the tray.

Envelopes should be stored in a place away from high-temperatures and humidity.

If there is a temperature difference between the location where the envelopes were stored and the location where

the envelopes are being printed, leave the envelopes in the printing location at room temperature before you use

them.

Correctly match the paper size dial, size switch, and Envelope Cassette settings in Common Settings (from the

Additional Functions screen) with the size of the envelopes being loaded. Failure to do so may cause paper jams,

dirty prints, or make the inside of the machine dirty.

The width guides on the envelope feeder attachment can be changed so that the following envelopes can be

loaded. Using envelopes other than these may result in paper jams, dirty prints, or make the inside of the machine

dirty.

- COM10 No.10: Mailwell No.582

- Monarch: Catalog

Glove No.8: Mailwell No.553

- DL: Mailwell/Schneidersone No.11345

- Yougata 4: Uzumaki Y-401

If you want to adjust the width guides to load ISO-C5 or ISO-B5 envelopes, contact your local authorized Canon

dealer.

•