Installation guide

Operations Required to Use the Machine
1-12
1
Flow of Settings
Managing the Machine from a Computer
The following operations and settings are required to manage the machine from a computer.
If you are using a NetWare network, NetBIOS network, or AppleTalk network, you cannot use this function.
1
Connect the machine to the network.
See “Connecting to a Network,” on p. 4-3.
See “Interface Settings,” on p. 4-9.
2
Set the machine to use the TCP/IP network.
See “TCP/IP Network Setup Procedures,” on p. 5-2.
See “Protocol Settings,” on p. 5-3.
3
Enable the machine to be managed from computers.
To enable the Remote UI
See “System Requirements for Using the Remote UI,” on p. 13-2.
See “Before You Start the Remote UI,” on p. 13-3.
To enable the MEAP management function (SMS)
See “System Requirements for Using SMS,” on p. 13-6.
See “Before Starting SMS (Preparations),” on p. 13-7.