Installation guide

Protocol Settings
5-15
5
Using a TCP/IP Network
7
On the TCP/IP Settings screen, press [DNS Settings]
[DNS Server Address
Settings].
8
In <IPv6>, specify the following.
If you want to use dynamic DNS updating, enter the IPv6 address of the DNS server in [Primary DNS
Server].
If you do not want to specify a secondary DNS server, leave [Secondary DNS Server] blank.
You cannot enter a multicast address or address composed entirely of zeros in [Primary DNS Server] or
[Secondary DNS Server].
If you set <Use DHCPv6> to 'On' in step 5, the IPv6 address of a DNS server you set manually will be
overwritten.