Installation guide

Protocol Settings
5-16
5
Using a TCP/IP Network
9 On the DNS Settings screen, press [DNS Host Name/Domain Name Settings]
→ in <IPv6>, specify the following.
[On] for <Use Same Host Name/Domain Name as IPv4>: You can set the same host name or domain
name used with IPv4 communication for IPv6 communication. If you set <Use Same Host Name/Domain
Name as IPv4> to 'Off', enter the name of the machine in [Host Name] and the name of the domain the
machine belongs to in [Domain Name]. It is necessary to set a host name and domain name if you want
to use dynamic DNS updating.
If you set <Use DHCPv6> to 'On' in step 5, the domain name you set manually will be overwritten. Even
if you set <Use Same Host Name/Domain Name as IPv4> to 'On', the domain name obtained from the
DHCPv6 server is used.
10 On the DNS Settings screen, press [DNS Dynamic Update Settings] → in
<IPv6>, specify the following.
[On] for <DNS Dynamic Update>: If your environment includes a dynamic DNS server, you can automati-
cally register the IPv6 address, host name, and domain name set for the machine in the DNS server using
dynamic DNS updating.
[On] for <Register Stateless Address>: You can automatically register a stateless address in the DNS server
using dynamic DNS updating.
[On] for <Register Manual Address>: You can automatically register a manual address in the DNS server
using dynamic DNS updating.