Installation guide

Protocol Settings
5-23
5
Using a TCP/IP Network
If you want to use proxy authentication, press [Authentication Settings] → [On] for <Use Proxy Authen-
tication> → enter the user name to use for proxy authentication in [User], and the password to use for
proxy authentication in [Password].
If you are using the imageRUNNER 3245i/3235i, or the imageRUNNER 3245/3235/3230/3225 with the
optional PS Printer Kit, you can print a file in the PDF or PS format by specifying its URL using the Remote UI.
To print a file by specifying its URL using the Remote UI, you need to specify the proxy settings suitable for
your environment. (Set in this step.)
11 On the TCP/IP Settings screen, press [Permitted Receiving MAC Address
Settings] → specify the following.
[On] for <Apply Settings>: You can enable a MAC address filter. Press [Register]
→ specify the MAC
addresses to allow access to.
Up to 100 MAC addresses can be specified.
If you select [On] for <Apply Settings>, you will become unable to access from MAC addresses which have
not been specified. Check the MAC addresses carefully before specifying them. If the corresponding MAC
address does not exist, you will become unable to access the network.
12 On the TCP/IP Settings screen, press [Dept. ID Management Password
Confirmation]
→ specify the following.
[On]: You can confirm the Department ID and password when printing using a driver that supports
Windows Vista.
•
•