Owner's Manual

1111
1
Getting Started and
Basic Operations
This chapter describes the preparations before starting ash
photography and the basic shooting operations.
Cautions for ring continuous ash
o
To avoid wearing out and damaging the ash head due to
overheating, do not re the ash continuously at full output
more than 30 times. After ring the ash continuously at full
output this many times, stop using the ash for at least 40
min.
o
If you re the ash continuously at full output for the
above listed number of times, and then re the ash
again repeatedly at short intervals, the safety function
may activate and restrict ash ring. When ash ring is
restricted, the ring interval is automatically set to approx.
45 sec. Stop using the ash for at least 40 min.
o
For details, see “Flash Firing Restrictions due to
Temperature Increase” on page 56.
I