Owner's Manual
Table Of Contents
23
Modeling Flash
When the camera’s depth-of-eld preview button is pressed, the ash
res continuously for approx. 1 sec. This feature is called “modeling
ash”. This is useful for checking shadows cast on the subject by the
ash light.
o
To avoid wearing out and damaging the ash head due to overheating,
do not re the modeling ash more than 30 times. If you re the modeling
ash more than this, stop using the ash for at least 40 min.
o
After you re the modeling ash this many times, continuing to re the
ash at short intervals will activate a safety function and restrict ash
ring to an interval of approx. 45 sec. Stop using the ash for at least 40
min.
o
During Live View shooting, ring the modeling ash by operating the
camera is not possible.
o
Modeling ash is not available with EOS M or EOS R cameras.
I