Owner's Manual

29
Setting Flash Functions from the Camera
Settings Available on the Flash Function Settings Screen
z
Flash ring
To perform ash photography, set to [Enable]. To use the ash’s AF-
assist beam only, set to [Disable].
z
E-TTL II ash metering
For normal exposures, set it to [Evaluative]. If [Average] is set, the
ash exposure will be averaged for the entire scene metered by the
camera.
z
Slow synchro
You can set the ash sync speed for ash photography in aperture-
priority AE mode or Program AE mode.
z
Flash synchronization speed in Av mode
You can set the ash synchronization speed when shooting in
aperture-priority AE mode.
z
Safety FE
To avoid overexposure from the ash ring during the day or at
close range, the camera can automatically reduce the ISO speed for
suitable exposure when set to ISO Auto.
z
Flash mode
You can select [E-TTL II ash metering] (p.18), [Manual ash]
(p.33), or [MULTI ash (stroboscopic)] (p.35). [Continuous
shooting priority mode] (p.37) is also available on some
cameras.
z
Shutter sync settings
(p.31)
You can select the ash ring timing/method from [First-curtain
synchronization], [Second-curtain synchronization], or [High-
speed synchronization].
z
Flash exposure compensation
(p.38)
With a similar procedure as exposure compensation, you can adjust
the ash output.
I