Owner's Manual
Table Of Contents
52
Wireless Multiple-Flash Photography with Flash Ratio
Setting up receivers
2
Set up the receiver for ash group
C.
z
Set the channel switch to the same
channel as set on the other receivers.
z
Set the Mode dial to <
6
>.
Group Control
You can add more receivers when more light or sophisticated lighting is
needed. For added receivers, specify the ash group (A, B, or C) that
you want to be brighter. There is no limit to how many receivers can be
added.
f ff
Flash group A
For example, when three receivers are
set to ash group <
4
>, they are all
controlled as a single ash unit in group
A.
o
To re the three groups of A, B, and C, set to [
6
]. Group C does
not re when set to [
5
].
o
Aiming the units in ash group C directly at subjects may cause
overexposure.
Flash ratios from 8:1 to 1:1 to 1:8 correspond to 3:1 to 1:1 to 1:3 when
converted into number of stops.