User Manual

38
To close the CaptureOnTouch window, click at the top of the window.
This closes the window, but CaptureOnTouch will continue to reside in the
system.
click (CaptureOnTouch icon) in the menu bar, and select [Exit] from
the menu.
Restarting CaptureOnTouch
To use CaptureOnTouch after it has been made not resident in the system,
use one of the following procedures to restart it. CaptureOnTouch will start
and become resident in the system again.
 Click [Start] - [All Programs] - [CaptureOnTouch] - [CaptureOnTouch
V4].
 Press the Start button on the scanner (in this case, the main screen
of CaptureOnTouch will open and scanning will start using the scan
method assigned to the Start button).
In Windows 8.1, it is registered in the following location.
 Open [GO] - [Applications] folder from the Finder, and double-click
[CaptureOnTouch].
 Press the Start button on the scanner (in this case, the main screen
of CaptureOnTouch will open and scanning will start using the scan
method assigned to the Start button).