Specification Sheet

14
Battery
Battery Pack LP-E17x 1
• With the AC Adapter + DC Coupler, AC power is possible.
• With the USB Power Adapter PD-E1, in-camera charging of LP-E17 is possible. The USB Power Adapter
PD-E1 is not compatible with powering the camera.
Number of Possible
Shots (Approx. Shots)
Shooting Method Temperature Possible Shots
Screen
Room
Temperature
(73°F / 23°C)
250
Low
Temperatures
(32°F / 0°C)
240
Screen
(Eco Mode: On)
Room
Temperature
(73°F / 23°C)
270
Viewnder (EVF)
(Smooth)
Room
Temperature
(73°F / 23°C)
210
Low
Temperatures
(32°F / 0°C)
200
Viewnder (EVF)
(Power saving)
Room
Temperature
(73°F / 23°C)
250
Low
Temperatures
(32°F / 0°C)
240
• Based on CIPA testing standards.
• Using a fully charged Batter Pack LP-E17
Battery Check
Automatic battery check when the power switch is turned ON.
Displayed in 4 levels.
• Battery level can be checked on the LCD panel and in the viewnder.
•Type of power source used.
•Remaing capacity (3 level battery capacity indicator).
•Recharge performance.
Power Saving
Power turns off after the set time of non-operation elapses.
Display off
Available time options: 15 sec. / 30 sec. / 1 min. / 3 min. / 5 min. / 10 min. / 30 min.
Auto power off
Available time options: 30 sec. / 1 min. / 3 min. / 5 min. / 10 min.
Disable
Viewnder off
Available time options: 1 min. / 3 min. / Disable
• At least approx. 6 min. until auto power off while the [Date/Time/Zone] screen is displayed.
Date/Time Battery
Built-in secondary battery
When fully-charged, the date/time can be maintained for approx. 3 months
• Recharge time: approx. 8 hrs.
⚪
The recharge time required to provide the above number of months with no battery pack installed.
Start-up Time
Approx. 0.82 sec.
• Based on CIPA testing standards.
Dimensions and Weight