ENGLISH Advanced User Guide
Introduction Before Starting to Shoot, Be Sure to Read the Following To avoid shooting problems and accidents, first read the “Safety Instructions” (=25–=27) and “Handling Precautions” (=28–=30). Also, read this manual carefully to ensure that you use the camera correctly. Refer to This Manual while Using the Camera to Further Familiarize Yourself with the Camera While reading this manual, take a few test shots and see how they come out. You can then better understand the camera.
Item Check List Before starting, check that all the following items are included with your camera. If anything is missing, contact your dealer. Camera (with body cap) Battery Pack LP-E17 (with protective cover) Battery Charger LC-E17E* Strap * Battery Charger LC-E17E comes with a power cord. oo The camera does not come with a memory card (=10), interface cable, or HDMI cable. oo For details on the Advanced User Guide and Instruction Manuals, see the next page.
Instruction Manuals The Instruction Manual included with the camera provides basic instructions for the camera and Wi-Fi functions. The Advanced User Guide (this PDF file), which provides complete instructions, can be downloaded from the Canon website to a computer or other device. Downloading the Advanced User Guide/Instruction Manuals The Advanced User Guide and Instruction Manuals for lenses and software (PDF files) can be downloaded from the Canon website to a computer or other device.
Instruction Manuals Downloading the Advanced User Guide/Instruction Manuals Using QR Code The Advanced User Guide and Instruction Manuals for lenses and software (PDF files) can be downloaded to a smartphone or tablet using the QR code. www.canon.com/icpd oo A software app is required to read the QR code. oo Select your country or region of residence, then download the Advanced User Guide/Instruction Manuals. oo Select [5: Manual/software URL] to display the QR code on the camera screen.
Quick Start Guide 1 2 3 4 5 6 Insert the battery (=42). zz Upon purchase, charge the battery to start using (=40). Insert the card (=42). zz With the card’s label facing toward the back of the camera, insert it into the card slot. Attach the lens (=48). zz Align the red mount index on the lens with the red mount index on the camera to attach the lens. zz Make sure the lens’s focus mode switch is set to <2> (=48). Set the power switch to <1> (=46). Flip out the screen (=45).
Quick Start Guide 6 7 8 9 Set the Mode dial to (=68). zz All the necessary camera settings will be set automatically. Focus on the subject (=54). zz (an AF point) appears over any face detected. zz Press the shutter button halfway, and the camera will focus on the subject. Take the picture (=54). zz Press the shutter button completely to take the picture. Review the picture. zz The image just captured will be displayed for approx. 2 sec. on the screen.
About This Manual Icons in this Manual <6> <5> <0> * : Indicates the Main dial. : Indicates the Quick control dial. : Indicates the corresponding direction on the cross keys. : Indicates the lens control ring. : Indicates the Setting button. : Indicates the duration (in * seconds) of the operation for the button you pressed, as timed after you release the button.
About This Manual Basic Assumptions for Operational Instructions, Sample Photos zz Before following any instructions, make sure the power switch is set to <1> and the Multi-function lock feature is off (=46, =58). zz It is assumed that all the menu settings and Custom Functions are set to their defaults. zz The illustrations in this manual show the camera attached with the RF24105mm F4 L IS USM lens as an example.
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (=367). zzSD/SDHC/SDXC memory cards UHS-II and UHS-I cards supported. Cards that Can Record Movies When recording movies, use a high-capacity card with ample performance (fast enough writing and reading speeds) for the movie recording size. For details, see =586.
Chapters Introduction 2 Preparation and Basic Operations 39 Basic Shooting 67 Creative Zone 95 Shooting 109 Playback 293 Set-up 357 Wi-Fi (Wireless Communication) Functions 415 Custom Functions / My Menu 523 Reference 553 11
Contents Introduction 2 Item Check List.......................................................................................3 Instruction Manuals.................................................................................4 Quick Start Guide....................................................................................6 About This Manual..................................................................................8 Compatible Cards............................................................
Contents Basic Shooting 67 Fully Automatic Shooting (Scene Intelligent Auto)................................68 Full Auto Techniques (Scene Intelligent Auto).......................................71 Special Scene Mode.............................................................................75 Shooting Portraits.................................................................................77 Shooting Group Photos.........................................................................
Contents Shooting Shooting Still Photos 109 110 Tab Menus: Still Photo Shooting......................................................... 111 Setting Image Quality..........................................................................116 Setting Cropping/Aspect Ratio............................................................119 Setting the Image Review Time..........................................................122 Correction of Lens Aberrations due to Optical Characteristics...........
Contents HDR (High Dynamic Range) Shooting................................................171 Interval Timer Shooting.......................................................................176 Reducing Flicker.................................................................................179 Selecting the Display Speed for High-Speed Continuous Shooting...181 Card Reminder....................................................................................182 Setting Touch & Drag AF.........................
Contents Recording Movies 235 Tab Menus: Movie Recording.............................................................236 Recording Movies...............................................................................239 Recording HDR Movies......................................................................247 Setting the Movie Recording Size.......................................................249 Movie Cropping...................................................................................
Contents Erasing Images...................................................................................314 Digital Print Order Format (DPOF)......................................................318 Specifying Images for a Photobook....................................................322 Processing RAW Images with the Camera.........................................325 Applying Your Favorite Effects (Creative Assist).................................331 Selecting the Type of RAW Image Processing............
Contents Formatting Memory Cards..................................................................367 Displaying the Shooting Mode Guide..................................................369 Displaying the Feature Guide.............................................................370 Setting Eco Mode................................................................................371 Setting Power-Saving Features..........................................................372 Adjusting the Screen Brightness......
Contents Registering Custom Shooting Modes.................................................408 Reverting the Camera to the Default Settings....................................410 Setting Copyright Information.............................................................411 Checking Other Information................................................................413 Wi-Fi (Wireless Communication) Functions 415 What You Can Do via Wi-Fi (Wireless Communication) Functions.....
Contents Custom Functions / My Menu 523 Tab Menus: Customization..................................................................524 Setting Custom Functions...................................................................525 Custom Function Settings...................................................................526 Clearing Custom Function Settings....................................................546 Tab Menus: My Menu..........................................................................
Index to Features Power Viewfinder zz Charging the battery (=40) zz Dioptric adjustment (=52) zz Battery level (=47) zz Information display in viewfinder (=389) zz Checking battery information (=381) zz Eco mode (=371) zz Power saving (=372) Cards zz Viewfinder vertical display (=390) zz Viewfinder display format (=393) Screen zz Vari-angle (=45) zz Formatting (=367) zz Touch control (=64) zz Releasing shutter without card (=182) zz Display settings (=394) zz Cards compatible with movie record
Index to Features Metering zz Metering mode (=211) Drive Shooting zz Shooting mode (=34) zz HDR mode (=171) zz Multiple exposures (=165) zz Drive mode (=206) zz Bulb timer (=107) zz Self-timer (=209) zz Depth-of-field preview (=101) zz Maximum burst (=118) Image Recording Settings zz Creating/Selecting a folder (=361) zz File numbering (=363) Image Quality zz Image quality (=116) zz Still photo cropping/aspect ratio (=119) zz ISO speed (still photos) (=131) zz Picture Style (=148) zz White balance
Index to Features Flash Playback zz External flash (=220) zz Image review time (=122) zz Flash exposure compensation (=220) zz Single-image display (=296) zz FE lock (=220) zz Shooting information display (=597) zz Flash function settings (=225) zz Grid display (=353) zz Flash Custom Function settings (=230) zz Touch playback (=298) Movie Recording zz Autoexposure recording (=239) zz Manual exposure recording (=241) zz Playback information display (=349) zz Index display (=300) zz Image browsi
Index to Features Image Editing Wireless Features zz RAW image processing (=325) zz Connect to smartphones (=419) zz Resizing JPEGs (=339) zz Auto send images to smartphones (=439) zz Cropping JPEGs (=337) Print Order zz Print order (DPOF) (=318) zz Photobook Set-up (=322) Customization zz Custom Functions (C.
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. oo Keep the product out of the reach of young children. A strap wrapped around a person’s neck may result in strangulation. The parts or provided items of cameras or accessories are dangerous if swallowed. If swallowed, seek immediate medical assistance.
Safety Instructions oo Observe the following instructions when using a battery charger or AC adapter. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. • Do not use the product if the power plug is not fully inserted into the power outlet. • Do not expose the power plug and terminals to dirt or let them come into contact with metallic pins or other metal objects.
Safety Instructions CAUTION: Denotes the risk of injury. oo Do not fire the flash near the eyes. It may hurt the eyes. oo Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness. In such a case, stop using the product immediately and rest for a while before resuming use. oo Flash emits high temperatures when fired. Keep fingers, any other part of your body, and objects away from the flash unit while taking pictures.
Handling Precautions Camera Care zz This camera is a precision instrument. Do not drop it or subject it to physical shock. zz The camera is not waterproof and cannot be used underwater. zz To maximize the camera’s dust- and drip- resistance, keep the terminal cover, battery compartment cover, card slot cover, and all other covers firmly closed.
Handling Precautions zz Do not block shutter curtain operation with your finger or other objects. Doing so may cause a malfunction. zz Use only a commercially available blower to blow away dust when it adheres to the lens, viewfinder, etc. Do not use cleaners that contain organic solvents to clean the camera body or lens. For stubborn dirt, take the camera to the nearest Canon Service Center. zz Do not touch the camera’s electrical contacts with your fingers. This is to prevent the contacts from corroding.
Handling Precautions Screen and Viewfinder zz Although the screen and viewfinder are manufactured with very high precision technology with over 99.99% effective pixels, 0.01% or fewer of the pixels may be dead, and there may also be spots of black, red, or other colors. This is not a malfunction. They do not affect the images recorded. zz If the screen is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
Part Names (1) (10) (11) (12) (2) (3) (4) (13) (14) (15) (5) (6) (16) (7) (17) (18) (19) (8) (9) (1) (2) (3) (4) (5) (6) (7) (8) (9) Focal plane mark <6> Main dial Multi-function button Shutter button Movie shooting button AF-assist beam/Self-timer/ Remote control lamp Grip (Battery compartment) Contacts Lens mount (10) (11) (12) (13) (14) (15) (16) (17) (18) (19) Flash sync contacts Hot shoe RF lens mount index Power switch Strap mount Microphone Image sensor Lens release button Lens l
Part Names (1) (2) (3) (5) (6) (7) (8) (4) (9) (14) (10) (15) (11) (16) (17) (18) (12) (13) (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) 32 Eyecup Viewfinder eyepiece Dioptric adjustment knob Terminal cover Mode dial <5> Quick control dial Multi-function lock switch AF start button Viewfinder sensor Info button (11) Access lamp (12) Quick Control/Setting button (13) Menu button (14) Remote control terminal (15) HDMI mini OUT terminal (16) External microphone IN te
Part Names (7) (8) (9) (10) (1) (2) (3) (4) (5) (6) (1) (2) (3) (4) (5) (6) (7) (8) (9) (13) (14) (15) (16) Accessory positioning hole Screen Tripod socket : cross keys Serial number Accessory positioning hole Speaker AE lock/FE lock button AF point/Index/Magnify/ Reduce button (11) (12) (10) (11) (12) (13) Strap mount Card slot Battery compartment Card slot/Battery compartment cover lock (14) Card slot/Battery compartment cover (15) Erase button (16) Playback butt
Part Names Mode Dial The Mode dial includes Basic Zone modes, Creative Zone modes, and movie recording mode. (1) (1) Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting.
Part Names (2) (3) (4) (2) Creative Zone These modes give you more control for shooting various subjects as desired. t Flexible-priority AE (=104) d Program AE (=96) s Shutter-priority AE (=98) f Aperture-priority AE (=100) a Manual exposure (=102) F Bulb (=106) (3) Custom shooting modes You can assign , , , , , , AF operation, menu functions, and more to , , or (=408).
Part Names Viewfinder Information Display Information displayed varies depending on camera status.
Part Names Battery Charger LC-E17E Charger for Battery Pack LP-E17 (=40).
Part Names Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations.
Charging the Battery the protective cover 1 Detach provided with the battery. insert the battery in the 2 Fully charger. zz Do the opposite to remove the battery. the battery. 3 Recharge zz Connect the power cord to the charger and insert the plug into a power outlet. gg Recharging starts automatically and the charge lamp (1) lights up in orange. gg When the battery is fully recharged, the full-charge lamp (2) will light up in green. zz It takes approx. 2 hr.
Charging the Battery zzUpon purchase, the battery is not fully charged. Charge the battery before use. zzCharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. zzAfter charging the battery, remove it and disconnect the charger from the power outlet. zzWhen not using the camera, remove the battery.
Inserting/Removing the Battery and Card Insert a fully charged Battery Pack LP-E17 into the camera. The camera can use SD, SDHC, or SDXC memory cards (sold separately). UHS-II/ UHS-I SDHC and SDXC cards are also supported. The captured images are recorded onto the card. oo Make sure the card’s write-protect switch (1) is set upward to enable writing and erasing. Insertion the card slot/battery 1 Slide compartment cover lock and open the cover. the battery.
Inserting/Removing the Battery and Card oo You cannot use batteries other than the Battery Pack LP-E17. oo After opening the card slot/battery compartment cover, be careful not to swing it back any further. Otherwise, the hinge may break. Removal the card slot/battery 1 Open compartment cover. (1) zz Set the power switch to <2>. zz Check that the access lamp (1) is off, then open the cover. zz If [Saving...] is displayed on the screen, close the cover. the battery.
Inserting/Removing the Battery and Card Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera (=367). oo The number of possible shots varies depending on the remaining capacity of the card, the settings of image quality, ISO speed, etc. oo Setting [z: Release shutter without card] to [Disable] will prevent you from forgetting to insert a card (=182).
Using the Screen You can change the direction and angle of the screen. out the screen. 1 Flip zz Hold at the top and bottom and pull out as shown. the screen. 2 Rotate zz When the screen is swung out, you can 180° 90° 175° rotate it up, down, or over 180° to face the subject. zz The indicated angle is only approximate. it toward you. 3 Face zz Normally, use the camera with the screen facing you. oo Be careful not to forcefully rotate the screen, putting much power on the rotating axis (hinge).
Turning on the Power zz <1> The camera turns on. zz <2> The camera is turned off and does not function. Set the power switch to this position when not using the camera. Setting the Date, Time, and Time Zone If you turn on the power switch and the date/time/zone setting screen appears, see =374 to set the date/time/zone. Changing the Interface Language To change the interface language, see =377.
Turning on the Power Battery Level Indicator : Battery level is sufficient. : Battery level is low, but the camera can still be used. : Battery will be exhausted soon. (Blinks) : Charge the battery. oo Doing any of the following will exhaust the battery faster: • Pressing the shutter button halfway for a prolonged period. • Activating the AF frequently without taking a picture. • Using the lens’s Image Stabilizer. • Using the Wi-Fi function or Bluetooth function.
Attaching and Detaching a Lens Attaching a Lens the caps. 1 Remove zz Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach zz Align the red mount index on the lens with the red mount index on the camera and turn the lens as shown by the arrow until it clicks in place. the lens’s focus mode switch 3 Set to . zz stands for autofocus. zz stands for manual focus. Autofocus will not operate. 4 Remove the front lens cap.
Attaching and Detaching a Lens Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. zz Turn the adapter until it stops, then detach it. zz Attach the rear lens cap to the detached lens. oo Do not look at the sun directly through any lens. Doing so may cause loss of vision. oo When attaching or detaching a lens, set the camera’s power switch to <2>. oo If the front part (focusing ring) of the lens rotates during autofocusing, do not touch the rotating part.
Attaching and Detaching EF/EF-S Lenses All EF and EF-S lenses can be used by attaching the optional Mount Adapter EF-EOS R. The camera cannot be used with EF-M lenses. Attaching a Lens the caps. 1 Remove zz Remove the rear lens cap and the body cap by turning them as shown by the arrows. (1) (2) the lens to the adapter. 2 Attach zz Align the red or white mount index on the lens with the corresponding mount index on the adapter and turn the lens as shown by the arrow until it clicks into place.
Attaching and Detaching EF/EF-S Lenses the lens’s focus mode switch 4 Set to . zz stands for autofocus. zz stands for manual focus. Autofocus will not operate. 5 Remove the front lens cap. Detaching the Lens pressing the lens release 1 While button, turn the adapter as shown by the arrow. zz Turn the adapter until it stops, then detach it. the lens from the adapter. 2 Detach zz Hold down the lens release lever on the adapter and turn the lens counterclockwise.
Using the Viewfinder Look through the viewfinder to activate it. You can also restrict display to either the screen or viewfinder (=394). Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. zz Turn the knob left or right to make the viewfinder display look sharp. oo The viewfinder and screen cannot be activated at the same time.
Basic Operations Holding the Camera zzViewing the Screen as You Shoot As you shoot, you can tilt the screen to adjust it. For details, see =45. Normal angle Low angle High angle zzShooting Through the Viewfinder To obtain sharp images, hold the camera still to minimize camera shake. Horizontal shooting Vertical shooting 1. Wrap your right hand around the camera grip firmly. 2. Hold the lens bottom with your left hand. 3. Rest your right index finger lightly on the shutter button. 4.
Basic Operations Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed on the screen or in the viewfinder for approx. 8 sec. or as set for the metering timer.* * By default, the metering timer is set to 8 sec.
Basic Operations
AF Start Button In Creative Zone modes, has the same effect as pressing the shutter button halfway. Multi-Function Button By pressing the button and turning the <5> dial, you can set the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation.
Basic Operations <6> Main Dial (1) After pressing a button, turn the <6> dial. Press a button such as , then turn the <6> dial. If you press the shutter button halfway, the camera will go back to shooting-ready state. (2) Turn only the <6> dial. While looking at the screen or viewfinder, turn the <6> dial. Use this dial to set the shutter speed, aperture, etc. oo Step (1) can be performed even when controls are locked with the Multifunction lock (=58).
Basic Operations <5> Quick Control Dial (1) After pressing a button, turn the <5> dial. Press a button such as , then turn the <5> dial. If you press the shutter button halfway, the camera will go back to shooting-ready state. (2) Turn only the <5> dial. While looking at the screen or viewfinder, turn the <5> dial. Use this dial to set the exposure compensation amount, the aperture setting for manual exposures, etc.
Basic Operations Multi-Function Lock Switch To avoid accidentally changing settings from the Main dial, Quick control dial, control ring, or touch-screen panel, configure [5: Multi function lock] and set the switch to . For [5: Multi function lock] details, see =407. Control Ring You can assign a commonly used function to the control ring of RF lenses or mount adapters (=542).
Basic Operations INFO Button Each press of the button changes the information shown. The following sample screens are for still photos.
Menu Operations and Settings (1) (2) (3) (6) (7) (5) (4) (1) (2) (3) (4) button button Screen cross keys (5) (6) (7) <0> button Quick control dial Main dial Basic Zone Modes Menu Screen * In Basic Zone modes, some tabs and menu items do not appear.
Menu Operations and Settings Creative Zone Modes Menu Screen (4) (5) (6) (7) (8) (1) (2) (9) (3) (1) (2) (3) (4) (5) Main tabs Secondary tabs Menu items z : Shooting 3 : Playback (6) (7) (8) (9) 5 : Set-up 8 : Custom Functions 9 : My Menu Menu settings Menu Setting Procedure the menu screen. 1 Display zz Press the button. a tab. 2 Select zz Press the button to switch between main tabs. zz Turn the <6> dial to select a secondary tab.
Menu Operations and Settings an item. 3 Select zz Turn the <5> dial to select an item, then press <0>. an option. 4 Select zz Turn the <5> dial to select an option. zz The current setting is indicated in blue. an option. 5 Set zz Press <0> to set it. the setting. 6 Exit zz Press the button to finish and prepare for shooting. oo The description of menu functions hereafter assumes that you have pressed the button to display the menu screen.
Menu Operations and Settings Dimmed Menu Items Example: Highlight tone priority Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing <0>. If you cancel the overriding function’s setting, the dimmed menu item will become settable. oo You may not be able to see the overriding function for certain dimmed menu items.
Touch-Screen Operation You can operate the camera by tapping or dragging on the screen (touchscreen panel) with your finger. Tap Sample screen (Quick Control) zz Use your finger to tap on (touch briefly and then remove your finger from) the screen. zz For example, when you tap on [Q], the Quick Control screen appears. By tapping on [2], you can return to the preceding screen. Drag Sample screen (Menu screen) zz Slide your finger while touching the screen.
Quick Control You can directly select and set the settings displayed on the screen. This is called Quick Control (except in mode). 1 Press the button (7). a setting item. 2 Select zz Press the keys for selection. zz When the screen at left is displayed, press the keys for selection. an option. 3 Select zz Turn the <6> or <5> dial, or press the keys to change the setting. There are also functions that are set by pressing a button following these operations.
Basic Shooting This chapter describes how to use the Basic Zone modes on the Mode dial for best results. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically.
Fully Automatic Shooting (Scene Intelligent Auto) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject (=71). 1 Set the Mode dial to . <0>. 2 Press zz Read the message and select [OK]. the camera at what you will 3 Aim shoot (the subject). zz A frame may be displayed around the subject, under some shooting conditions.
Fully Automatic Shooting (Scene Intelligent Auto) on the subject. 4 Focus zz Press the shutter button halfway to focus. zz You can also focus by touching a person’s face or another subject on the screen (Touch AF) when [z: Continuous AF] is set to [Disable]. zz Under low light, the AF-assist beam (=201) is automatically activated if needed. gg For stationary subjects, the AF point is displayed in green when the subject is in focus, and the camera beeps (One-Shot AF).
Fully Automatic Shooting (Scene Intelligent Auto) Minimizing Blurred Photos zz Use a sturdy tripod that can bear the weight of the shooting equipment. Mount the camera securely on the tripod. zz Using a remote switch (sold separately, =219) or a wireless remote control (sold separately, =217) is recommended. FAQ zzFocusing is not possible (indicated by an orange AF point). Aim the AF point over an area with good contrast, then press the shutter button halfway (=54).
Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. Pressing the shutter button halfway to focus on a still subject will lock the focus on that subject. Recompose the shot while keeping the shutter button pressed halfway, and then press the shutter button completely to take the picture. This is called “focus lock”.
Full Auto Techniques (Scene Intelligent Auto) Scene Icons The camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen. For icon details, see =595. Adjusting Settings by Touching the Screen By touching icons, you can adjust settings for drive mode, image quality, Touch Shutter, and Creative Assist.
Full Auto Techniques (Scene Intelligent Auto) Shooting with Effects Applied (Creative Assist) You can shoot with your selected effects applied. the button. 1 Press zz Read the message and select [OK]. an effect. 2 Select zz Use the keys to select an effect, then press <0>. the effect level and other 3 Select details. zz Use the keys to set it, then press <0>. zz To reset the setting, press the button, then select [OK].
Full Auto Techniques (Scene Intelligent Auto) zz[ ] Brightness zz[ ] Contrast zz[ ] Saturation Adjust image brightness. Adjust contrast. Adjust the vividness of colors. zz[ ] Color tone 1 zz[ ] Color tone 2 zz[ ] Monochrome Adjust amber/blue color tone. Adjust green/magenta color tone. Set the toning effect for monochrome shooting. Set to [Off] to shoot in color. [Saturation], [Color tone 1], and [Color tone 2] are not available with options other than [Off].
Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. * <8> stands for Special Scene. 1 Set the Mode dial to <8>. 2 Press the <0> button. a shooting mode. 3 Select zz Press the keys to select the shooting mode, then press <0>. zz You can also select the shooting mode by turning the <6> or <5> dial. oo Cautions on each shooting mode are listed together (=90). Read the cautions before shooting.
Special Scene Mode Available Shooting Modes in the 8 Mode Shooting mode 2 Portrait Page =77 Shooting mode 4 Close-up Page =84 q Group Photo =78 P Food =85 3 Landscape =79 6 Night Portrait =86 5 Sports =80 F Handheld Night Scene =87 =81 G HDR Backlight Control =88 =82 I Silent Mode =89 C Kids r Panning oo You can also set the shooting mode from [z: Shooting mode] after setting the Mode dial to <8>.
Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips zzSelect the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. zzUse a telephoto lens.
Shooting Group Photos Use the (Group Photo) mode to shoot group photos. You can take a picture in which both the people in the front and people in the back are all in focus. Shooting Tips zzUse a wide-angle lens. When using a zoom lens, use the wide-angle end to make it easy to get all the people in the group in focus at once, from the front row to the back.
Shooting Landscapes Use the <3> (Landscape) mode for expansive scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips zzWith a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus. It also adds breadth to landscapes. zzShooting night scenes. Shooting with <3> while handholding the camera may cause camera shake. Using a tripod is recommended.
Shooting Moving Subjects Use the <5> (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. (1) Shooting Tips zzUse a telephoto lens. Use of a telephoto lens is recommended to enable shooting from a distance. zzTrack the subject with the Area AF frame. By default, [z: AF method] is set to [u+Tracking]. An Area AF frame (1) appears when you press the shutter button halfway. Once the subject is in focus, the AF point turns blue. zzShoot continuously.
Photographing Children To photograph the children running around, use (Kids). Skin tones will look healthy. (1) Shooting Tips zzTrack the subject with the Area AF frame. By default, [z: AF method] is set to [u+Tracking]. An Area AF frame (1) appears when you press the shutter button halfway. Once the subject is in focus, the AF point turns blue. zzShoot continuously. The default setting is [o] (High-speed continuous shooting).
Panning If you want to take a picture with the feel of speed and a blurred motion effect on the subject’s background, use (Panning). If you use a lens supporting the mode, subject blur is detected, corrected, and reduced. Shooting Tips zzTurn the camera to follow the moving subject. When shooting, turn the camera smoothly as you track the moving subject.
Panning zzSet the level of background motion blur. With [Effect], you can set the level of background motion blur. The [Max] setting will set a slower shutter speed to increase the background motion blur around the subject. If the subject blur is noticeable, set [Effect] to [Med] or [Min] to reduce the blur. oo For details on lenses compatible with mode, visit the Canon website.
Shooting Close-ups When you want to shoot flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips zzUse a simple background. A simple background makes small objects such as flowers stand out better. zzMove in as close as possible to the subject. Check the lens for its minimum focusing distance.
Shooting Food When you want to take pictures of food, use
(Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips zzChange the color tone. You can change [Color tone]. To increase the food’s reddish tinge, set it toward [Warm]. Set it toward [Cool] if it looks too red.
Shooting Night Portraits (With a Tripod) When you want to photograph people at night and obtain a natural-looking night scene in the background, use the <6> (Night Portrait) mode. Note that an external Speedlite is required for shooting. Using a tripod is recommended. Shooting Tips zzUse a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, since camera shake is prone to occur with handheld shooting, use a tripod. zzCheck the image brightness.
Shooting Night Scenes (Handheld) Using a tripod when shooting a night scene gives the best results. However, the (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. In this shooting mode, four shots are taken consecutively for each picture, and the resulting one image with reduced camera shake is recorded. Shooting Tips zzHold the camera firmly. During shooting, hold the camera firmly and steadily.
Shooting Backlit Scenes When shooting a scene having both the bright and dark areas, use the (HDR Backlight Control) mode. When you take one picture in this mode, three consecutive shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting. * HDR stands for High Dynamic Range. Shooting Tips zzHold the camera firmly. During shooting, hold the camera firmly and steadily.
Shooting Quiet Scenes Where silence is needed, you can shoot without beeps such as shutter release sounds. Shooting Tips zzTake some test shots. It is recommended to take a few test shots in advance, because under some shooting conditions, lens aperture adjustment may be audible. oo As you shoot, a white frame is momentarily displayed around the screen. oo The drive mode can only be set to , , or .
Cautions for the Modes q: Group Photo oo The angle of view changes slightly, due to distortion correction. oo Depending on the shooting conditions, focus may not be attained for everyone from the front to the back of the image. 5: Sports oo Under low light where camera shake tends to occur, the shutter speed value in the lower left will blink. Hold the camera steady and shoot. oo Using an external Speedlite will decrease the continuous shooting speed.
Cautions for the Modes r: Panning (continued) oo With a lens supporting the mode, subject blur may not be corrected properly when shooting the following subjects or under the following shooting conditions. • Subjects with very low contrast. • Subjects in low light. • Strongly backlit or reflective subjects. • Subjects with repetitive patterns. • Subjects with less patterns or monotonous patterns. • Subjects with reflections (images reflected in glass, etc.).
Cautions for the Modes 6: Night Portrait oo Tell subjects to remain still for a moment after the flash fires. oo Focusing may be difficult when subject faces look dark. In this case, set the lens’s focus mode switch to and focus manually. oo Autofocusing at night or in dark scenes may be difficult when points of light lie within the AF point. In this case, set the lens’s focus mode switch to and focus manually. oo Shots will look slightly different from the image as displayed on the screen.
Cautions for the Modes F: Handheld Night Scene (continued) oo If you shoot a moving subject, the subject’s movement may leave afterimages or the surrounding area of the subject may become dark. oo The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.), flat or single-tone images, or images significantly misaligned due to camera shake. oo It takes some time to record images to the card since they are merged after shooting.
Creative Zone Creative Zone modes give you the freedom to shoot in a variety of ways by setting your preferred shutter speed, aperture value, exposure, and more. zz To clear the shooting mode description displayed when you turn the Mode dial, press <0> (=369). oo Make sure the Multi-function lock feature is off.
Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * stands for Program. * AE stands for Auto Exposure. 1 Set the Mode dial to . on the subject. 2 Focus zz Aim the AF point over the subject and press the shutter button halfway. gg Once the subject is in focus, the AF point turns green (with One-Shot AF). gg The shutter speed and aperture are set automatically. the display.
Program AE oo If the “30"” shutter speed and the lowest f/number blink, it indicates underexposure. Increase the ISO speed or use flash. oo If the “1/4000” shutter speed and the highest f/number blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens. Differences Between and Modes oo In mode, many functions, such as the AF method and metering mode, are set automatically to prevent spoiled shots.
Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure matching the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion. * stands for Time value. Blurred motion (Slow speed: 1/30 sec.) Frozen motion (Fast speed: 1/2000 sec.) 1 Set the Mode dial to .
Shutter-Priority AE oo If the lowest f/number blinks, it indicates underexposure. Turn the <6> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. oo If the highest f/number blinks, it indicates overexposure. Turn the <6> dial to set a faster shutter speed until the aperture stops blinking or set a lower ISO speed. Shutter Speed Display oo For example, “0"5” indicates 0.5 sec. and “15"”, 15 sec.
Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus. On the other hand, a lower f/number (larger aperture hole) will make less of the foreground and background fall within acceptable focus.
Aperture-Priority AE oo If the “30"” shutter speed blinks, it indicates underexposure. Turn the <6> dial to set a larger aperture (lower f/number) until the shutter speed blinking stops or set a higher ISO speed. oo If the “1/4000” shutter speed blinks, it indicates overexposure. Turn the <6> dial to set a smaller aperture (higher f/number) until the shutter speed blinking stops or set a lower ISO speed. Aperture Value Display oo The higher the f/number, the smaller the aperture opening will be.
Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. This method is called manual exposure. * stands for Manual. 1 Set the Mode dial to . the ISO speed (=131). 2 Set zz With ISO Auto, you can set exposure compensation (=103). the shutter speed and aperture. 3 Set zz To set the shutter speed, turn the <6> dial. To set the aperture, turn the <5> dial.
Manual Exposure Exposure Compensation with ISO Auto If the ISO speed is set to [AUTO] for manual exposure shooting, you can set exposure compensation (=128) as follows: Touch the exposure level indicator [z: Expo.comp./AEB] Quick Control screen oo If ISO Auto is set, the ISO speed setting will change to obtain the standard exposure with the set shutter speed and aperture. Therefore, you may not obtain the desired exposure effect. In this case, set the exposure compensation.
Flexible-Priority AE In this mode, you can set shutter speed, aperture, and ISO speed manually or automatically and combine these settings with your choice of exposure compensation. Shooting in mode, with control over each of these parameters, is equivalent to shooting in , , , or mode. * stands for Flexible value. 1 Set the Mode dial to . the shutter speed, aperture, 2 Set and ISO speed. zz Turn the <5> dial to select an item to set.
Flexible-Priority AE Combinations of Functions in Mode Shutter Speed Aperture Exposure Compensation Shooting Mode Available Similar to Available Similar to Manual selection Available Similar to [AUTO] Available Manual selection – ISO Speed [AUTO] [AUTO] [AUTO] Manual selection [AUTO] [AUTO] Manual selection Manual selection Manual selection Manual selection [AUTO] Manual selection [AUTO] Similar to oo Blinking values indicate that the values set will cause unde
Long (Bulb) Exposures In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. This photographic technique is called “bulb exposure”. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures. 1 Set the Mode dial to . the desired aperture. 2 Set zz Turn the <6> dial to set it. the picture.
Long (Bulb) Exposures oo With [z Long exp. noise reduction], you can reduce the noise generated during long exposures (=159). oo For bulb exposures, using a tripod and bulb timer is recommended. oo You can also shoot bulb exposures by using Remote Switch RS-60E3 (sold separately, =219). oo You can also use Wireless Remote Control BR-E1 (sold separately) for bulb exposures. When you press the remote control’s transmit button, the bulb exposure will start immediately or 2 sec. later.
Long (Bulb) Exposures the desired exposure time. 3 Set zz Select the hour, minute, or second. zz Press <0> to display . zz Set the desired number, then press <0>. (Returns to .) 4 Select [OK]. the picture. 5 Take gg Press the shutter button completely, and the bulb exposure will start and continue until the set time elapses. zz [H] and the exposure time are displayed on the screen during bulb timer shooting. zz To cancel the timer setting, set [Disable] in step 2.
Shooting This chapter describes shooting and introduces menu settings on the shooting ([z]) tab.
Shooting Still Photos zz A M icon to the right of a page title indicates that the function is available only in Creative Zone , , , , , or mode.
Tab Menus: Still Photo Shooting zzShooting 1 =116 =119 =122 =182 zzShooting 2 =123 =222 zzShooting 3 =129 =131 =286 =136 =137 =138 =139 111
Tab Menus: Still Photo Shooting zzShooting 4 =140 =143 =145 =147 =148, 152, 155 zzShooting 5 =159 =157 =161 =163 =165 =171 =202 zzShooting 6 =176 =106 =179 =181 112
Tab Menus: Still Photo Shooting zzShooting 7 =185 =188 =198 =199 =183 zzShooting 8 =200 =201 =216 zzShooting 9 =249 =257 =260 =280 =288 113
Tab Menus: Still Photo Shooting In Basic Zone modes, the following screens are displayed. zzShooting 1 =76 =116 =122 =182 zzShooting 2 =73 =163 =176 zzShooting 3 =188 =198 =199 =183 oo [Shooting mode] and [AF method] are available in <8> mode. oo [Retain Creative Assist data] is available in mode.
Tab Menus: Still Photo Shooting zzShooting 4 =201 =71 =216 zzShooting 5 =249 =257 =260 =280 oo [MF peaking settings] is available in <8> mode. oo [A Auto servo] is available in mode.
Setting Image Quality You can select the pixel count and the image quality. JPEG image quality options include 73, 83, 74, 84, 7a, 8a, and b. RAW image quality options include 1 and F. 1 Select [z: Image quality]. the image quality. 2 Set zz To select the RAW quality, turn the <6> dial, and to select the JPEG quality, press the keys. zz Press <0> to set it.
Setting Image Quality RAW Images A RAW image is raw data output by the image sensor converted to digital data. It is recorded to the card as is, and you can select the quality as follows: 1 or F. F produces RAW images with smaller file sizes than 1. RAW images can be processed using [3: RAW image processing] (=325) and saved as JPEG images. (Just as for 1, all JPEG size options are available for F.
Setting Image Quality Maximum Burst for Continuous Shooting The approximate maximum burst is shown on the shooting screen and in the lower right of the viewfinder. oo If the maximum burst is displayed as “99”, it indicates that you can shoot 99 or more shots continuously. The value starts decreasing once it reaches 98 or less. [BUSY] display indicates that internal memory is full and shooting will stop temporarily. If you stop continuous shooting, the maximum burst will increase.
Setting Cropping/Aspect Ratio N Normally with RF or EF lenses, images are captured at the sensor size of approx. 36.0×24.0 mm in full-frame shooting, but in cropped shooting, you can isolate and magnify the center of the image approx. 1.6x (APS-C size) as if using a telephoto lens, or you can set an aspect ratio to suit your shooting application before shooting. For EF-S lenses, a 3:2 aspect ratio in the center is captured, magnified approx. 1.6x (APS-C size). [z: zCropping/aspect 1 Select ratio].
Setting Cropping/Aspect Ratio Setting examples Y set U set or EF-S lens used W set 120 the picture. 3 Take zz When [1.6x (crop)] is set or an EF-S lens is used, an image magnified approx. 1.6x is displayed. zz When [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] is set, the image within the black masked is captured.
Setting Cropping/Aspect Ratio oo Areas outside the cropped area are not recorded in RAW shooting when [1.6x (crop)] is set, or with EF-S lenses. oo The [z: zCropping/aspect ratio] setting is not used as the basis for auto flash zoom (auto flash coverage adjustment) by an external Speedlite. oo For details on pixel counts when cropping or an aspect ratio is set, see =584. oo Nearly 100% field of view coverage is maintained vertically and horizontally when cropping or an aspect ratio is set.
Setting the Image Review Time You can set how long the image is displayed on the screen immediately after shooting. To keep the captured image displayed, set [Hold]. To not have the captured image displayed, set [Off]. 1 Select [z: Image review]. 2 Set a time option. oo When [Hold] is set, images are displayed as long as the time set in [5: Power saving].
Correction of Lens Aberrations due to Optical Characteristics N Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. [z: Lens aberration 1 Select correction]. 2 Select an item. [Enable]. 3 Select zz Confirm that the name of the attached lens and (except for diffraction correction) [Correction data available] are displayed.
Correction of Lens Aberrations due to Optical Characteristics Peripheral Illumination Correction Vignetting (dark image corners) can be corrected. oo Depending on shooting conditions, noise may appear on the image periphery. oo The higher the ISO speed, the lower the correction amount will be. oo The correction amount applied will be lower than the maximum correction amount that applied with Digital Photo Professional (EOS software).
Correction of Lens Aberrations due to Optical Characteristics Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of clarity. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual.
Correction of Lens Aberrations due to Optical Characteristics Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. oo [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is enabled. Diffraction Correction Diffraction (loss of sharpness caused by the aperture) can be corrected. oo Depending on shooting conditions, noise may be intensified together with the effects of correction.
Correction of Lens Aberrations due to Optical Characteristics General Cautions for Lens Aberration Correction oo Peripheral illumination correction, chromatic aberration correction, distortion correction, and diffraction correction cannot be applied to JPEG images already taken. oo When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed.
Setting the Desired Exposure Compensation N Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation can be set in the , , , , and shooting modes. You can set exposure compensation up to ±3 stops in 1/3-stop increments. For details on exposure compensation when mode and ISO Auto are both set, see =103, and see =104 for mode. the exposure.
Auto Exposure Bracketing (AEB) N By changing the shutter speed, aperture, or ISO speed automatically, you can bracket the exposure up to ±3 stops in 1/3-stop increments for three consecutive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. 1 Select [z: Expo.comp./AEB]. the AEB range. 2 Set zz Turn the <6> dial to set the AEB range (1). Press the keys to set the exposure compensation level. zz Press <0> to set it.
Auto Exposure Bracketing (AEB) oo If [z: Auto Lighting Optimizer] (=136) is set to any setting other than [Disable], the effect of AEB may be reduced. oo blinks in the lower left of the screen during AEB shooting. oo If the drive mode is set to , press the shutter button three times for each shot. When or is set and you hold down the shutter button completely, the three bracketed shots will be taken consecutively and the camera will automatically stop shooting.
Setting the ISO Speed for Still Photos N Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, ISO speed is set automatically. Regarding the ISO speed during movie recording, see =588. the button (9). 1 Press zz With an image displayed on the screen, press the button. the ISO speed item. 2 Select zz Turn the <5> dial to select the ISO speed item. the ISO speed. 3 Set zz Turn the <6> dial to set it.
Setting the ISO Speed for Still Photos ISO Speed Guide zz Low ISO speeds reduce image noise but may increase the risk of camera/subject shake or reduce the area in focus (shallower depth of field), in some shooting conditions. zz High ISO speeds enable low-light shooting, a larger area in focus (deeper depth of field), and longer flash range but may increase image noise.
Setting the ISO Speed for Still Photos Setting the Manually-Settable ISO Speed Range You can set the manually-settable ISO speed range (minimum and maximum limits). You can set the minimum limit within L (equivalent to ISO 50) to H1 (equivalent to ISO 51200), and the maximum limit within ISO 100 to H2 (equivalent to ISO 102400). 1 Select [z: z ISO speed settings]. 2 Select [ISO speed range]. the minimum limit. 3 Set zz Select the minimum limit box, then press <0>.
Setting the ISO Speed for Still Photos Setting the ISO Speed Range for ISO Auto You can set the automatic ISO speed range for ISO Auto within ISO 100–40000. 1 Select [Auto range]. the minimum limit. 2 Set zz Select the minimum limit box, then press <0>. zz Select the ISO speed, then press <0>. the maximum limit. 3 Set zz Select the maximum limit box, then press <0>. zz Select the ISO speed, then press <0>. 4 Select [OK].
Setting the ISO Speed for Still Photos Setting the Minimum Shutter Speed for ISO Auto You can set the minimum shutter speed for ISO Auto. This can help reduce camera shake and subject blur in or mode when shooting moving subjects with a wide-angle lens, or when using a telephoto lens. 1 Select [Min. shutter spd.]. Automatically set the desired minimum shutter 2 Set speed. zz If you select [Auto], turn the <6> dial to set a slower or faster speed, then press <0>.
Auto Correction of Brightness and Contrast N Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. This function is called Auto Lighting Optimizer. In Basic Zone modes, [Standard] is set automatically. [z: Auto Lighting 1 Select Optimizer]. 2 Set a correction option. the picture. 3 Take gg The image will be recorded with the brightness and contrast corrected as necessary. oo Noise may increase and clarity may change, under some shooting conditions.
Highlight Tone Priority N You can reduce overexposed, clipped highlights. 1 Select [z: Highlight tone priority]. an option. 2 Set zz [Enable]: Improves gradation in highlights. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. zz [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. the picture.
Setting the Metering Timer N You can set how long the metering timer runs (which determines the duration of exposure display/AE lock) after it is triggered by an action such as pressing the shutter button halfway. 1 Select [z: Metering timer]. 2 Set a time option.
Exposure Simulation N Exposure simulation simulates and displays how the brightness (exposure) of the actual image will look. 1 Select [z: Expo. simulation]. 2 Set an option. zzEnable (g) The displayed image brightness will be close to the actual brightness (exposure) of the resulting image. If you set exposure compensation, the image brightness will change accordingly. zzDuring e Normally, the image is displayed at standard brightness, so it is easy to see (E).
Setting the White Balance N White balance (WB) is for making the white areas look white. Normally, the Auto [Q] (Ambience priority) or [Qw] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. In Basic Zone modes, [Q] (Ambience priority) is set automatically. (In
mode, [Qw] (White priority) is set.) the button (9).
Setting the White Balance (Approx.) Display Q Qw Mode Auto (Ambience priority, =142) Auto (White priority, =142) Color Temperature (K: Kelvin) 3000–7000 W Daylight 5200 E Shade 7000 R Cloudy, twilight, sunset 6000 Y Tungsten light 3200 U White fluorescent light D Flash 4000 Automatically set* O Custom (=143) 2000–10000 P Color temperature (=144) 2500–10000 * Applicable with Speedlites having a color temperature transmission function. Otherwise, it will be fixed to approx. 6000K.
Setting the White Balance [Q] Auto White Balance With [Q] (Ambience priority), you can slightly increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [Qw] (White priority), you can reduce the intensity of the image’s warm color cast. If you want to match the Auto white balance of previous EOS camera models, select [Q] (Ambience priority). 1 Select [z: White balance]. [Q]. 2 Select zz With [Q] selected, press the button. 3 Select an item.
Setting the White Balance [O] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. a white object. 1 Shoot zz Aim the camera at a plain white subject, so that white fills the screen. zz Focus manually and shoot with the standard exposure set for the white object. zz You can use any of the white balance settings.
Setting the White Balance oo If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. oo The following images cannot be selected: Images captured with the Picture Style set to [Monochrome], multiple-exposure images, cropped images, and images shot with another camera. oo Instead of shooting a white object, you can also shoot a gray chart or standard 18% gray reflector (commercially available).
White Balance Correction N You can correct the white balance that is set. This adjustment will have the same effect as using a commercially available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. White Balance Correction 1 Select [z: WB Shift/Bkt.]. the white balance correction. 2 Set zz Press the cross keys to move the Sample setting: A2, G1 “■” mark to the appropriate position.
White Balance Correction White Balance Auto Bracketing White balance bracketing (WB Bkt.) enables you to capture three images at once with different color tones. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias and magenta/green bias. White balance bracketing is possible up to ±3 levels in single-level increments. B/A bias ±3 levels Set the white balance bracketing amount.
Setting the Color Space N The range of reproducible colors is called “color space”. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. 1 Select [z: Color space]. 2 Set a color space option. Adobe RGB This color space is mainly used for commercial printing and other industrial uses. Recommended when using equipment such as Adobe RGBcompatible monitors or DCF 2.0 (Exif 2.21 or later) compatible printers.
Selecting a Picture Style N Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. In Basic Zone modes, [D] (Auto) is set automatically. 1 Select [z: Picture Style]. 2 Select a Picture Style.
Selecting a Picture Style Picture Style Characteristics zz[D] Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor and sunset scenes. oo If the desired color tone is not obtained with [Auto], use another Picture Style. zz[P] Standard The image looks vivid, sharp, and crisp. This is a general-purpose Picture Style suitable for most scenes. zz[Q] Portrait For nice skin tones.
Selecting a Picture Style zz[U] Faithful Suited for processing the image with a computer. The color of a subject that is captured in sunlight at a color temperature of 5200K will be adjusted to match the subject’s colorimetrical color. For subdued images with modest brightness and color saturation. zz[V] Monochrome Creates black-and-white images. oo Color images cannot be recovered from JPEG images shot with the [Monochrome] Picture Style.
Selecting a Picture Style Symbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other settings. The numbers indicate the values for these settings specified for the respective Picture Style.
Customizing a Picture Style N You can customize the Picture Styles. You can adjust Picture Style settings such as [Contrast] or [Sharpness] ([Strength], [Fineness], and [Threshold]). To customize [Monochrome], see =154. 1 Select [z: Picture Style]. a Picture Style. 2 Select zz Select the Picture Style to adjust, then press the button. an item. 3 Select zz See the next page for details on the settings and effects.
Customizing a Picture Style 4 Set the effect level. zz Press the button to save the adjusted setting and return to the Picture Style selection screen. gg Any settings you change from default values are displayed in blue.
Customizing a Picture Style [V] Monochrome Adjustment Besides the effects described on the preceding page such as [Contrast], or [Strength], [Fineness] and [Threshold] for [Sharpness], you can also set [Filter effect] and [Toning effect]. [k] Filter effect Filter With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Sample Effects N: None Normal black-and-white image with no filter effects.
Registering a Picture Style N You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. Useful when creating several Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software) can also be modified here. 1 Select [z: Picture Style]. [User Def.]. 2 Select zz Select [User Def. *], then press the button. <0>.
Registering a Picture Style 5 Select an item. the effect level. 6 Set zz For details, see “Customizing a Picture Style” (=152). zz Press the button to save the adjusted setting and return to the Picture Style selection screen. gg The base Picture Style will be indicated on the right of [User Def. *]. gg Blue style names indicate that you have changed the settings from default values. oo If a Picture Style is already registered under [User Def.
Setting Noise Reduction N High ISO Speed Noise Reduction This function reduces the noise generated in the image. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. 1 Select [z: High ISO speed NR]. 2 Set the level. zz[M] Multi Shot Noise Reduction Applies the noise reduction with higher image quality than [High].
Setting Noise Reduction Cautions for Setting Multi Shot Noise Reduction oo If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. oo If you are handholding the camera, keep it steady to prevent camera shake. Using a tripod is recommended. oo If you shoot a moving subject, the moving subject may leave afterimages. oo Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
Setting Noise Reduction Long Exposure Noise Reduction For images exposed for 1 sec. or longer, noise (dots of light and banding) typical of long exposures can be reduced. [z: Long exp. noise 1 Select reduction]. 2 Set a reduction option. zz[AUTO] Automatic For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective enough in most cases.
Setting Noise Reduction oo With [Auto] or [Enable] set, the noise reduction process after the picture is taken may take the same amount of time as that for the exposure. oo Images may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting. oo [BUSY] is displayed as noise is reduced, and the shooting screen is not displayed until processing is finished, when you can shoot again.
Appending Dust Delete Data N Dust Delete Data used to erase dust spots can be appended to images in case sensor cleaning leaves dust on the sensor. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically. Preparation zz Use an RF or EF lens. zz Prepare a solid white object such as a sheet of paper. zz Set the lens focal length to 50 mm or longer. zz Set the lens’s focus mode switch to and set the focus to infinity (∞).
Appending Dust Delete Data a plain white object. 3 Shoot zz Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). zz Since the image will not be saved, the data can still be obtained even if there is no card in the camera. gg When the picture is taken, the camera will start collecting the Dust Delete Data. When the Dust Delete Data is obtained, a message will appear.
Shooting with the Touch Shutter Just by tapping on the screen, you can focus and take the picture automatically. the Touch Shutter. 1 Enable zz Tap [y] on the screen’s bottom left. zz Each time you tap on the icon, it will toggle between [y] and [x]. zz [x] (Touch Shutter: Enable) The camera will focus on the spot you tap on, then the picture will be taken. zz [y] (Touch Shutter: Disable) You can tap on a spot to perform focusing on the spot. Press the shutter button completely to take the picture.
Shooting with the Touch Shutter oo Even if you set the drive mode to or , the camera will still shoot in the single shooting mode. oo Even if [AF operation] is set to [Servo AF], tapping on the screen will focus on the image with [One-Shot AF]. oo Tapping on the screen in magnified view will not focus or take the picture. oo If you shoot by tapping on the screen with [z: Image review] set to [Hold], you can press the shutter button halfway to take the next shot.
Multiple Exposures N As you shoot multiple exposures (2–9), you can see how the images will be merged into a single image. 1 Select [z: Multiple exposure]. a [Multiple exposure] option. 2 Set zz Select [Enable]. zz To exit shooting multiple exposures, select [Disable]. 3 Set [Multi-expos ctrl]. zzAdditive The exposure of each single image captured is added cumulatively. Based on the [No. of exposures], set a negative exposure compensation.
Multiple Exposures the [No. of exposures]. 4 Set zz Select the number of exposures, then press <0>. zz You can set it from 2 to 9 exposures. a [Continue Mult-exp] option. 5 Set zz With [1 shot only], multiple-exposure shooting will be canceled automatically after the shooting ends. zz With [Continuously], multiple-exposure shooting continues until the setting in step 2 is set to [Disable]. (1) the first exposure. 6 Shoot gg The captured image will be displayed.
Multiple Exposures oo The image quality, ISO speed, Picture Style, high ISO speed noise reduction, color space, etc. set for the first single exposure will also be set for the subsequent exposures. oo If [z: Picture Style] is set to [Auto], [Standard] will be applied for shooting. oo With multiple exposures, the more exposures there are, the more noticeable the noise, irregular colors, and banding will be. oo If [Additive] is set, the image processing after taking the multiple exposures will take time.
Multiple Exposures Merging Multiple Exposures with an Image Recorded on the Card You can select a RAW image recorded on the card as the first single exposure. The image data of the selected RAW image will remain intact. Only 1 or F images can be used. JPEG images cannot be selected. Images you can specify also vary depending on the lens attached. For details, see the table below. [Select image for multi. 1 Select expo.]. the first image.
Multiple Exposures oo The ISO speed, Picture Style, high ISO speed noise reduction, color space, etc. set for the first image will also be applied for the subsequent images. oo If Picture Style is [Auto] for the image selected as the first image, [Standard] will be applied for shooting. oo You cannot select an image taken with another camera. oo [Select image for multi. expo.] is not available unless a lens is attached. oo You can also select a RAW image used in multiple-exposure shooting.
Multiple Exposures FAQ zzAre there any restrictions on the image quality? All single exposures and the multiple-exposure image are captured at your specified image quality. zzCan I merge images recorded on the card? With [Select image for multi. expo.], you can select the first single exposure from the images recorded on the card (=168). Note that you cannot merge multiple images already recorded on the card.
HDR (High Dynamic Range) Shooting N You can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even in high-contrast scenes. HDR shooting is effective for landscape and still-life shots. With HDR shooting, three images of different exposures (standard exposure, underexposure, and overexposure) are captured consecutively for each shot and then merged together automatically. The HDR image is recorded as a JPEG image. * HDR stands for High Dynamic Range.
HDR (High Dynamic Range) Shooting Effects zz[P] Natural For images preserving a wide tonal range where the highlight and shadow details would otherwise be lost. Clipped highlights and shadows will be reduced. zz[A] Art standard While the clipped highlights and shadows will be reduced more than with [Natural], the contrast will be lower, and the gradation flatter to have the picture look like a painting. The subject outlines will have bright (or dark) edges.
HDR (High Dynamic Range) Shooting a [Continuous HDR] option. 4 Set zz With [1 shot only], HDR shooting will be canceled automatically after the shooting ends. zz With [Every shot], HDR shooting continues until the setting in step 2 is set to [Disable HDR]. [Auto Image Align]. 5 Set zz For handheld shooting, select [Enable]. When using a tripod, select [Disable]. the picture.
HDR (High Dynamic Range) Shooting oo RAW HDR images are captured in JPEG 73 image quality. RAW+JPEG HDR images are captured in the specified JPEG image quality. oo HDR shooting is not possible with expanded ISO speeds (L, H1, H2). HDR shooting is possible within ISO 100–40000 (varies depending on the settings of [Minimum] and [Maximum] for [ISO speed range]). oo The flash will not fire during HDR shooting. oo AEB is not available. oo If you shoot a moving subject, the moving subject may leave afterimages.
HDR (High Dynamic Range) Shooting oo When shooting HDR images with [Auto Image Align] set to [Enable], AF point display information (=352) and Dust Delete Data (=161) will not be appended to the image. oo If you perform handheld HDR shooting with [Auto Image Align] set to [Enable], image periphery will be slightly trimmed and resolution will be slightly lowered. Also, if the images cannot be aligned properly due to camera shake, etc., auto image alignment may not take effect.
Interval Timer Shooting With the interval timer, you can set the shooting interval and number of shots, so that the camera takes individual shots repeatedly according to your interval until your specified number of shots are taken. 1 Select [z: Interval timer]. [Enable]. 2 Select zz Select [Enable], then press the button. the shooting interval and 3 Set number of shots. zz Select an item to set (hours : minutes : seconds / number of shots). zz Press <0> to display .
Interval Timer Shooting (1) (2) [OK]. 4 Select gg The interval timer settings will be displayed on the menu screen. (1) (2) Interval Number of shots the picture. 5 Take gg First shot is taken and shooting continues according to the interval timer settings. zz During interval timer shooting, will blink. zz After the set number of shots are taken, the interval timer shooting will stop and be automatically canceled. oo Using a tripod is recommended. oo Taking test shots in advance is recommended.
Interval Timer Shooting oo Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. oo Setting the lens focus mode switch to prevents the camera from shooting unless subjects are in focus. Setting it to and focusing manually before shooting is recommended. oo When shooting over an extended period, consider using an optional household power outlet accessory.
Reducing Flicker N If you shoot an image with a fast shutter speed under a light source such as fluorescent light, the blinking of the light source causes flicker and the image may be vertically unevenly exposed. If continuous shooting is used under these conditions, uneven exposures or colors across the images may result. Anti-flicker shooting enables you to take pictures when exposure and colors are less affected by flickering. 1 Select [z: Anti-flicker shoot.]. 2 Select [Enable]. the picture.
Reducing Flicker oo In the , , or mode, if the shutter speed changes during continuous shooting or if you shoot multiple shots of the same scene at different shutter speeds, the color tone may become inconsistent. To avoid inconsistent color tones, use , , or mode at a fixed shutter speed. oo Color tone of captured images may vary between [Enable] and [Disable]. oo Shutter speed, aperture, and ISO speed may change when you start shooting (even with AE lock).
Selecting the Display Speed for HighSpeed Continuous Shooting N High-speed display that switches between your shot and the live image is available when shooting with an RF lens, with [z: AF operation] set to [Servo AF], and with the drive mode set to [High speed continuous]. Display is more responsive, making it easier to follow fastmoving subjects. Select [z: 1 display]. High speed an item. 2 Select zz Select [Enable] for display that switches between each shot and the live image.
Card Reminder You can set the camera not to shoot unless there is a card in the camera. The default setting is [Enable]. [z: Release shutter without 1 Select card]. 2 Select [Disable].
Setting Touch & Drag AF You can move the AF point or Zone AF frame by touching or dragging on the screen as you look through the viewfinder. Enabling Touch & Drag AF [z: Touch & drag AF 1 Select settings]. [Touch & drag AF]. 2 Select zz Select [Enable]. Positioning Method You can set how positions are specified by touching or dragging. 1 Set the positioning method. zz[Absolute] The AF point moves to the touched or dragged position on the screen.
Setting Touch & Drag AF Active Touch Area You can specify the area of the screen used for touch and drag operations. 1 Set the active touch area. oo Touching the screen when [u+Tracking] is set displays a round orange frame < >. After you lift your finger at the position to move the AF point to, < > is displayed and that subject is tracked. To cancel subject selection, press the button.
Selecting the AF Operation N You can select the AF operation characteristics to suit the shooting conditions or subject. 1 Select [z: AF operation]. 2 Select an item. oo If focus cannot be achieved, the AF point will turn orange. If this occurs, the picture cannot be taken even if the shutter button is pressed completely. Recompose the shot and try to focus again. Or, see “Shooting Conditions that Make Focusing Difficult” (=197).
Selecting the AF Operation One-Shot AF for Still Subjects (ONE SHOT) Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. zz When focus is achieved, the AF point will turn green and the beeper will sound. zz The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture. zz For details on the continuous shooting speed for continuous shooting, see =206.
Selecting the AF Operation AF-Assist Beam The AF-assist beam may fire repeatedly when you press the shutter button halfway under low light or in similar conditions, to make autofocusing easier. oo The AF-assist beam does not fire when [z: AF operation] is set to [Servo AF]. oo The AF-assist beam does not fire when Touch AF is used (when [z: Touch Shutter] is set to [Disable]). oo When you are using an external flash unit, either the camera or the flash unit fires an AF-assist beam as needed.
Selecting the AF Method You can select the AF method to suit the shooting conditions or subject. The camera attempts to focus on faces of any people in an AF point or Zone AF frame. In mode, [u+Tracking] is set automatically. For instructions on selecting an AF method, see =190. AF Method : Face+Tracking The camera detects and focuses on people's faces. (an AF point) appears over any face detected, which is then tracked. If no face is detected, the entire AF area is used for auto selection AF.
Selecting the AF Method : Expand AF area (Z) Focusing uses one AF point and points above, below, and to the left and right . Effective for moving subjects, which are difficult to track with 1-point AF. Focusing on your preferred subject is easier than with Zone AF. When Servo AF is used, first you will focus using an AF point . : Expand AF area: Around Focusing uses one AF point and surrounding points , which makes it easier to focus on moving subjects than with Z AF point expansion.
Selecting the AF Method Selecting the AF Method You can select the AF method to suit the shooting conditions or subject. If you prefer to focus manually, see =214. 1 Select [z: AF method]. 2 Select an item. oo In mode, [u+Tracking] is set automatically. oo In mode, only [1-point AF] or [Zone AF] can be set. oo Only [u+Tracking] and [1-point AF] are available when 4K movie recording is set.
Selecting the AF Method zzu(face)+Tracking: c The camera detects and focuses on human faces. If a face moves, the AF point
also moves to track the face. the AF point. 1 Check gg
(an AF point) appears over any face detected. zz You can choose a face with the keys when appears after you press the button. on the subject. 2 Focus zz Once you press the shutter button halfway and the subject is in focus, the AF point turns green and the camera beeps twice.
Selecting the AF Method Tapping a Face for Focus Tapping a face or subject to focus on changes the AF point to < > and focuses where you tap. Even if the face or subject moves on the screen, the AF point < > moves to track it. oo If the subject’s face is significantly out of focus, face detection will not be possible. Adjust the focus manually (=214) so that the face can be detected, then perform AF. oo An object other than a human face may be detected as a face.
Selecting the AF Method zzSpot AF / 1-point AF / Expand AF area (Z) / Expand AF area: Around / Zone AF You can manually set the AF point or Zone AF frame. Here, 1-point AF screens are used as an example. the AF point. 1 Check gg The AF point (1) will appear. (1) zz With Expand AF area (Z) or Expand AF area: Around, adjacent AF points are also displayed. zz With Zone AF, the Zone AF frame is displayed. the AF point. 2 Move zz Press the button.
Selecting the AF Method on the subject. 3 Focus zz Aim the AF point over the subject and press the shutter button halfway. gg When focus is achieved, the AF point will turn green and the beeper will sound. gg If focus is not achieved, the AF point will turn orange. 4 Take the picture.
Selecting the AF Method Magnified View You can check the focus by magnifying display by approx. 5× or 10×. Magnified view is not possible with [u+Tracking]. zz Magnification is centered on the AF point for [Spot AF], [1-point AF], [Expand AF area (Z)], and [Expand AF area: Around] and is centered on the Zone AF frame for [Zone AF]. zz Autofocusing is performed with magnified display if you press the shutter button halfway when set to [1-point AF], and [Spot AF].
Selecting the AF Method Notes for AF AF Operation zz Even when focus is achieved, pressing the shutter button halfway will focus again. zz Image brightness may change during autofocusing. zz Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. zz If the light source changes as you shoot, the screen may flicker, and focusing may be difficult.
Selecting the AF Method Shooting Conditions that Make Focusing Difficult zz Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. zz Subjects in low light. zz Stripes and other patterns where there is contrast only in the horizontal direction. zz Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). zz Fine lines and subject outlines.
Focusing on People’s Eyes With the AF method set to [u+Tracking], you can shoot with the subject’s eyes in focus. 1 Select [z: Eye Detection AF]. 2 Select [Enable]. the camera at the subject. 3 Aim gg An AF point is displayed around their eye. zz You can tap the screen to select an eye for focus. The entire face is selected when you tap other facial features, such as their nose or mouth. Eyes to focus on are selected automatically.
Setting Continuous AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. 1 Select [z: Continuous AF]. 2 Select [Enable]. oo Enabling this function reduces the number of shots available, because the lens is driven continuously and battery power is consumed.
Setting Lens Electronic MF N For RF, EF, or EF-S lenses equipped with electronic manual focusing, you can specify how manual focus adjustment is used with One-Shot AF. 1 Select [z: Lens electronic MF]. 2 Select an item. zz[ ] Disable after One-Shot zz[ ] One-Shot→enabled zz[ ] One-Shot→enabled (magnify) Manual focus adjustment after the AF operation is disabled. You can manually adjust the focus after the AF operation if you keep holding down the shutter button halfway.
Setting AF-Assist Beam Firing You can specify how the AF-assist beam is used on the camera or a Speedlite. 1 Select [z: AF-assist beam firing]. 2 Select an item. zz[ON] Enable Enables firing of the AF-assist beam, when needed. zz[OFF] Disable Disables firing of the AF-assist beam. Set if you prefer not to fire AFassist beams from the camera and external flash units. zz[LED] LED AF assist beam onlyM An LED AF-assist beam is fired by LED-equipped external flash units.
Focus Bracketing N Focus bracketing* enables continuous shooting with the focal distance changed automatically after a single shot. From these images, you can create a single image in focus over a wide area by using an application that supports depth compositing, such as Digital Photo Professional (EOS software). * “Bkt.” stands for bracketing. 1 Select [z: Focus bracketing]. [Focus bracketing]. 2 Specify zz Select [Enable]. the number of images. 3 Set zz Specify the number of images captured per shot.
Focus Bracketing [Focus increment]. 4 Set zz Specify how much to shift the focus. This amount is automatically adjusted to suit the aperture value at the time of shooting. Because larger aperture values increase the focus shift, focus bracketing covers a wider range under the same [Focus increment] and [Number of shots] settings in that case. zz After completing the settings, press the button. zz To save your shots in a new folder, tap ] and select [OK]. [ [Exposure smoothing].
Focus Bracketing oo Focus bracketing is intended for still photo shooting on a tripod. oo Shooting with a wider angle of view is recommended. After depth compositing, you can crop the image if necessary. oo The following lenses can be used (as of October 2018). • RF35mm F1.8 MACRO IS STM • RF50mm F1.2 L USM • RF28-70mm F2 L USM • RF24-105mm F4 L IS USM • EF16-35mm f/4L IS USM • EF24-70mm f/4L IS USM • EF100mm f/2.8L MACRO IS USM • EF180mm f/3.5L MACRO USM • EF-S35mm f/2.8 MACRO IS STM • EF-S60mm f/2.
Focus Bracketing oo Use of a tripod, remote switch (sold separately, =219), or wireless remote control (sold separately, =217) is recommended. oo For best results, set the aperture value in a range of f/5.6–11 before shooting. oo Details such as shutter speed, aperture value, and ISO speed are determined by conditions for the first shot. oo If [z: Picture Style] is set to [Auto], [Standard] will be applied for shooting. oo To cancel shooting, press the shutter button completely again.
Selecting the Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. the button (9). 1 Press zz With an image displayed on the screen, press the button. the drive mode item. 2 Select zz Turn the <5> dial to select the drive mode item. the drive mode. 3 Select zz Turn the <6> dial to make a selection. zz[u] Single shooting When you press the shutter button completely, only one shot will be taken.
Selecting the Drive Mode With Servo AF shooting: When [AF operation] is set to [Servo AF], the continuous shooting speed of max. approx. 4.0 shots/sec. will be given priority. In flash photography: With EL or EX series Speedlites, the continuous shooting speed will be max. approx. 2.3 shots/sec. zz[i] Low-speed continuous shooting When you hold down the shutter button completely, you can shoot continuously at max. approx. 2.6 shots/sec. while you keep holding it down.
Selecting the Drive Mode oo Approx. 5.0 shots/sec. is the maximum high-speed continuous shooting speed (=206) under these conditions: shooting with a fully charged battery in One-Shot AF mode at a 1/500 sec. or faster shutter speed and maximum aperture (depending on the lens), Image Stabilizer off (depending on the lens), at room temperature (23°C / 73°F), with flicker reduction, and Digital Lens Optimizer disabled.
Using the Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. the button (9). 1 Press zz With an image displayed on the screen, press the button. the drive mode item. 2 Select zz Turn the <5> dial to select the drive mode item. the self-timer. 3 Select zz Turn the <6> dial to select the self- timer. m (Q): Shoot in 10 sec. l (k): Shoot in 2 sec. q: Shoot continuously in 10 sec.
Using the Self-Timer the picture. 4 Take zz Focus on the subject, then press the shutter button completely. gg To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen. gg Self-timer lamp blinking accelerates and the camera beeps quickly approx. 2 sec. before the picture is taken. oo With , the shooting interval may become longer under some shooting conditions, depending on image quality, use of external flash, and other factors.
Selecting the Metering Mode N You can select one of four methods to measure the subject brightness. In Basic Zone modes, evaluative metering is set automatically. the button (7). 1 Press zz With an image displayed, press the button. the metering mode. 2 Select zz Use the keys to select the item shown. zz Use the keys to select the metering mode.
Selecting the Metering Mode oo By default, the camera will set the exposure as follows. With [q] (Evaluative metering), holding down the shutter button halfway will lock the exposure setting (AE lock) after focus is achieved with One-Shot AF. In the [w] (Partial metering), [r] (Spot metering), and [e] (Center-weighted average metering) modes, the exposure is set at the moment the picture is taken. (Pressing the shutter button halfway does not lock the exposure.) oo With [8C.Fn I-7: AE lock meter.
Locking the Exposure for Shooting (AE Lock) N You can lock the exposure when you want to set the focus and exposure separately or when you are to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the picture. This is called AE lock. It is effective for shooting backlit subjects, etc. on the subject. 1 Focus zz Press the shutter button halfway. gg The exposure setting will be displayed. the button (4).
Focusing Manually If focusing is not possible with autofocus, you can magnify the image and focus manually. the lens’s focus mode switch 1 Set to . zz Turn the lens focusing ring to focus roughly. an area to magnify. 2 Determine zz Press the button to activate magnified display, then move it to where you want to focus by using the <6> or <5> dial or the cross keys. zz To center the magnified area, press the button. the image.
Focusing Manually manually. 4 Focus zz While looking at the magnified image, turn the lens focusing ring to focus. zz After focusing, press the button or <0> to return to the normal view. 5 Take the picture. oo Even with manual focusing, you can use the Touch Shutter to take a picture.
Focusing Manually Setting MF Peaking (Outline Emphasis) Edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection (except in mode). 1 Select [z: MF peaking settings]. [Peaking]. 2 Select zz Select [On]. the level and color. 3 Set zz Set it as necessary. oo Peaking display is not shown during magnified display.
Remote Control Shooting Wireless Remote Control BR-E1 (sold separately) compatible with Bluetooth® low energy technology enables remote control shooting. Pairing To use BR-E1, you must first pair (connect and register) the camera and remote control. For pairing instructions, see =399. Do the following after the devices are paired. the button (9). 1 Press zz With an image displayed on the screen, press the button. the drive mode item. 2 Select zz Turn the <5> dial to select the drive mode item.
Remote Control Shooting the picture. 4 Take zz By pressing the <2> button on the remote control, you can also autofocus. zz To shoot, press the release button on the remote control. zz For detailed shooting instructions, refer to the BR-E1 instruction manual. oo You cannot use infrared remote control units such as Remote Controller RC-6. oo If focusing is not possible with AF, focus manually before shooting (=214). oo Auto power off time may be extended when the camera is set for remote shooting.
Using a Remote Switch You can shoot by connecting Remote Switch RS-60E3 (sold separately). For operating instructions, refer to the remote switch instruction manual. 1 Open the terminal cover. the plug to the remote 2 Connect control terminal.
Flash Photography EL/EX Series Speedlites for EOS Cameras Using an EL/EX series Speedlite (sold separately) makes flash photography easy. For operation procedures, refer to the EL/EX series Speedlite’s Instruction Manual. This camera is a Type-A camera that can use all the features of EL/EX series Speedlites. To set the flash functions and flash Custom Functions on the camera’s menu screen, see =222. zzFlash exposure compensation You can adjust flash output (flash exposure compensation).
Flash Photography Canon Speedlites Other Than the EL/EX-Series zz With an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only. Set the camera’s shooting mode to manual exposure or aperture-priority AE and adjust the aperture setting before shooting. zz When using a Speedlite that has manual flash mode, shoot in the manual flash mode.
Setting the Flash Function N With an EL/EX series Speedlite having compatible flash function settings, you can use the camera’s menu screen to set the Speedlite’s functions and Custom Functions. Attach the Speedlite to the camera and turn on the Speedlite before setting the flash functions. For details on the Speedlite’s functions, refer to the Speedlite’s Instruction Manual. [z: External Speedlite 1 Select control]. 2 Select an item.
Setting the Flash Function Flash Firing To enable flash photography, set to [Enable]. To disable flash firing or enable only the AF-assist beam, set to [Disable]. Otherwise, when a Speedlite that supports auto flash firing is attached, the automatic firing is performed according to the shooting conditions. For detailed shooting instructions, refer to the instruction manual of Speedlites supporting auto flash firing. E-TTL II Flash Metering For normal flash exposures, set it to [Evaluative].
Setting the Flash Function Slow Synchro You can set the flash-sync speed for flash photography in aperture-priority AE mode or Program AE mode. zz[ ] 1/180-30sec. auto zz[ ] 1/180-1/60sec. auto zz[ ] 1/180 sec. (fixed) The flash sync speed is set automatically within a range of 1/180 sec. to 30 sec. to suit the scene’s brightness. Slow-sync shooting is used under some shooting conditions, in low-light locations, and shutter speed is automatically lowered.
Setting the Flash Function Safety FE To avoid overexposure from the flash firing during the day or at close range, the camera can automatically lower the ISO speed and shoot with standard subject exposure when set to ISO Auto. Flash Function Settings The information displayed, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors.
Setting the Flash Function zzFlash mode You can select the flash mode to suit your desired flash photography. [E-TTL II flash metering] is the standard mode of EL/EX series Speedlites for automatic flash photography. [Manual flash] is for setting the Speedlite’s [Flash output level] yourself. [CSP] (continuous shooting priority mode) automatically decreases flash output by one stop and increases ISO speed by one stop. Useful in continuous shooting, and helps conserve flash battery power.
Setting the Flash Function zzWireless functions / Firing ratio control Wireless (multiple) flash photography is possible with radio or optical transmission. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. With a macro flash (MR-14EX II, etc.) compatible with flash function settings, you can set the firing ratio between flash tubes or flash heads A and B, or use wireless flash with additional receiver units.
Setting the Flash Function zzShutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the exposure starts. If [Second-curtain synchronization] is set, the flash will be fired right before the shutter closes. When this is combined with a slow shutter speed, you can create a trail of light such as from car headlights at night with a more natural feel.
Setting the Flash Function zzFlash exposure compensation You can set flash exposure compensation up to ±3 stops in 1/3-stop increments. For details, refer to the Speedlite’s Instruction Manual. oo If flash exposure compensation is set with the Speedlite, you cannot set the flash exposure compensation with the camera. If it is set with both the camera and Speedlite, the Speedlite’s setting overrides the camera’s.
Setting the Flash Function Flash Custom Function Settings For details on the Speedlite’s Custom Functions, refer to the Speedlite’s (sold separately) Instruction Manual. 1 Select [Flash C.Fn settings]. the desired functions. 2 Set zz Select the number. zz Select an item. oo With an EL/EX series Speedlite, the Speedlite will always fire at full output if the [Flash metering mode] Custom Function is set to [TTL] (autoflash). oo The Speedlite’s Personal Function (P.
General Notes on Still Photo Shooting Information Display For details on the icons displayed for still photo shooting, see =591. oo When is displayed in white, it indicates that the image is displayed at the brightness level closely matching that of the actual image to be captured. oo If is blinking, it indicates that the image is displayed at a brightness that differs from the actual shooting result because of low- or bright-light conditions.
General Notes on Still Photo Shooting oo Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. oo Defocused image areas may be incomplete when shooting near maximum aperture at high shutter speeds. If you dislike the appearance of defocused image areas, shooting as follows may give better results. • Lower the shutter speed. • Increase the aperture value.
General Notes on Still Photo Shooting Images and Display oo Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image. oo Under low light, noise may be noticeable in image display even at low ISO speeds, but there will be less noise in your shots, because image quality varies between display and captured images. oo The screen or exposure value may flicker if the light source (lighting) changes.
General Notes on Still Photo Shooting oo The image’s field of view coverage is approx. 100% (with image quality set to JPEG 73). oo If the camera is idle over an extended period, the screen will turn off automatically after the time set in [Display off] or [Viewfinder off] under [5: Power saving]. The camera then turns off automatically after the time set in [Auto power off] (=372). oo With the HDMI Cable HTC-100 (sold separately), you can display the image on a television (=308).
Recording Movies For movie recording, set the Mode dial to . zz A M icon to the right of a page title indicates that the function is available only for manual exposure recording (=241). oo You can record movies by pressing the movie shooting button during still photo shooting. oo You can also specify movie recording mode from [z: Shooting mode] after setting the Mode dial to .
Tab Menus: Movie Recording zzShooting 1 =239 =249 =256 =257 =260 zzShooting 2 =285 =262 =285 =274 zzShooting 3 =128 =286 =136 =287 =288 =138 =289 236
Tab Menus: Movie Recording zzShooting 4 =142 =143 =145 =148 =157 =290 zzShooting 5 =188 =280 =198 =183 zzShooting 6 =200 =282 =283 =216 237
Tab Menus: Movie Recording In [u] mode, the following screens are displayed.
Recording Movies k Autoexposure Recording Autoexposure control will take effect to suit the scene’s current brightness. 1 Set the Mode dial to . 2 Press <0>. [k]. 3 Select zz Use the keys to select [k (Movie auto exposure)], then press <0>. zz Selection is also possible by turning the <6> or <5> dial. on the subject. 4 Focus zz Before recording a movie, focus with AF or manual focus (=190–=197, =214).
Recording Movies the movie. 5 Record zz Press the movie shooting button to start (1) recording a movie. gg While the movie is being recorded, the “oREC” mark (1) will be displayed on the upper right of the screen. gg Sound is recorded by the microphones at the positions indicated (2). zz To stop recording the movie, press the movie shooting button again. (2) oo The Quick Control screen appears after step 2 when [5: Mode guide] is set to [Disable]. Use the keys to select [k].
Recording Movies M Manual Exposure Recording You can manually set the shutter speed, aperture, and ISO speed for movie recording. 1 Set the Mode dial to . 2 Press <0>. [M]. 3 Select zz Use the keys to select [M (Movie manual exposure)], then press <0>. zz Selection is also possible by turning the <6> or <5> dial. the ISO speed. 4 Set zz Press the button. zz Turn the <5> dial to select the ISO speed item. zz Turn the <6> dial to set it.
Recording Movies the shutter speed (1) and 5 Set aperture (2). zz Press the shutter button halfway and check the exposure level indicator. zz To set the shutter speed, turn the <6> dial. To set the aperture, turn the <5> dial. zz Shutter speed can be set in a range of 1/4000–1/8 sec. (1) (2) and record the movie. 6 Focus zz The procedure is the same as steps 4 and 5 for “Autoexposure Recording” (=239–=240). oo The Quick Control screen appears after step 2 when [5: Mode guide] is set to [Disable].
Recording Movies oo For movie recording, the ISO speed cannot be expanded to L (equivalent to ISO 50). oo When switching from still photo shooting to movie recording, check the camera settings again before recording movies. oo During movie recording, avoid changing the shutter speed or aperture. Doing so may record the changes in the exposure or create more noise at high ISO speeds. oo When recording a movie of a moving subject, a shutter speed of approx. 1/25 sec. to 1/125 sec. is recommended.
Recording Movies Still Photo Shooting Still photos cannot be taken in movie recording mode. To shoot still photos, turn the Mode dial to switch to another shooting mode. Information Display (Movie Recording) For details on the icons displayed for movie recording, see =593.
Recording Movies Cautions for Movie Recording oo Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. oo If you shoot something that has fine detail, moire or false colors may result. oo If or is set and the ISO speed or aperture changes during movie recording, the white balance may also change.
Recording Movies Notes for Movie Recording oo Each time you record a movie, a new movie file is created on the card. oo The movie’s field of view coverage for recording 4K, Full HD, and HD movies is approx. 100%. oo You can also focus by pressing the
button. oo To enable starting or stopping movie recording by pressing the shutter button completely, set [Fully-press] for [5: Shutter btn function for movies] to [Start/stop mov rec]. oo Stereo sound is recorded by the camera’s built-in microphone (=240).
Recording HDR Movies You can record high dynamic range movies that retain detail in highlights of high-contrast scenes. 1 Set the Mode dial to . 2 Press <0>. [u]. 3 Select zz Use the keys to select [u (HDR Movie)], then press <0>. zz Selection is also possible by turning the <6> or <5> dial. an HDR movie. 4 Record zz Record the movie in the same way as normal movie recording. zz For details on file sizes and the recording time available, see the table on =586.
Recording HDR Movies oo [z: Movie cropping] is not available. oo Since multiple frames are merged to create an HDR movie, certain parts of the movie may look distorted. During handheld recording, camera shake may make the distortion look more noticeable. Using a tripod is recommended. Note that even if a tripod is used for recording, afterimages or noise may become more noticeable when the HDR movie is played back frame-by-frame or in slow-motion compared to normal playback.
Setting the Movie Recording Size Under the [z: Movie rec. size] tab, set the image size, frame rate, and compression method. The movie will be recorded as an MP4 file. The frame rate displayed on the [Movie rec. size] screen switches automatically depending on the [5: Video system] setting (=378). oo The card’s writing and reading speeds required for recording movies (card performance requirements) vary depending on the movie recording size.
Setting the Movie Recording Size oo If you change the [5: Video system] setting, also set [z: Movie rec. size] again. oo Normal playback of 4K and L8/7 movies may not be possible on other devices, because playback is processing-intensive. oo Clarity and noise vary slightly depending on movie recording size, cropped shooting settings, and the lens used. oo Movies cannot be recorded in VGA quality. 4K Movie Recording zz Recording 4K movies requires a high-performance card.
Setting the Movie Recording Size Movie-Recording Coverage Image sensor coverage for movies varies depending on movie recording size, cropped shooting settings, and the lens used. With EF-S lenses, movies are cropped around the center of the image.
Setting the Movie Recording Size zzFrame rate (fps: frame per second) [8] 59.94fps / [6] 29.97fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). [7] 50.00fps / [5] 25.00fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.). [4] 23.98fps Mainly for motion pictures. 4 (23.98fps) is available when [5: Video system] is set to [For NTSC].
Setting the Movie Recording Size Cards that Can Record Movies For details on cards you can use for various movie recording sizes, see =585. When recording movies, use a high-capacity card with a writing/reading speed (as specified in card performance requirements) shown in the table on =585 or higher than the standard specification. Test cards by recording a few movies to make sure they can record correctly at your specified size (=249). oo Format cards before recording 4K movies (=367).
Setting the Movie Recording Size Movie Files Exceeding 4 GB Even if you record a movie exceeding 4 GB, you can keep recording without interruption. zzUsing SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32. With a FAT32-formatted card, if you record a movie and the file size exceeds 4 GB, a new movie file will be created automatically. When you play back the movie, you will have to play back each movie file individually.
Setting the Movie Recording Size Total Movie Recording Time and File Size Per Minute For details on file sizes and the recording time available at each movie recording size, see =586. Movie Recording Time Limit The maximum recording time per movie is 29 min. 59 sec. Once 29 min. 59 sec. is reached, recording automatically stops. You can start recording a movie again by pressing the movie shooting button (which records the movie as a new file).
Movie Cropping With RF or EF lenses, movies can be cropped around the center of the image, as if using a telephoto lens. Recording movies with EF-S lenses has the same effect as this movie cropping feature. 1 Select [z: Movie cropping]. [Enable]. 2 Select gg The center area is magnified. oo Full HD movies cannot be recorded with movie cropping. oo The center of the screen is further cropped, reducing the shooting area, when [z: Movie digital IS] is set to [Enable] or [Enhanced].
Setting the Sound Recording You can record movies while recording sound with the built-in stereo microphone or an external stereo microphone. You can also freely adjust the sound-recording level. Use [z: Sound recording] to set sound recording functions. Sound Recording/Sound-Recording Level zzAuto The sound-recording level is adjusted automatically. Auto level control will take effect automatically in response to the sound level. zzManual You can adjust the sound-recording level as needed.
Setting the Sound Recording Attenuator Automatically suppresses sound distortion caused by loud noises. Even if [Sound rec.] is set to [Auto] or [Manual] for recording, sound distortion may still result if there is a very loud sound. In this case, setting it to [Enable] is recommended. zzUsing a microphone Normally, the camera’s built-in microphone records in stereo. If an external microphone equipped with a miniature stereo plug (3.
Setting the Sound Recording oo Sounds from Wi-Fi operations may be captured with built-in or external microphones. During sound recording, using the wireless communication function is not recommended. oo When connecting an external microphone or headphones to the camera, be sure to insert the plug all the way in. oo The camera’s built-in microphone will also record the operation sound and mechanical sound of the camera during shooting.
Movie Digital IS In-camera image stabilization electronically corrects camera shake during movie recording. This function is called “Movie digital IS”. With Movie digital IS, images can be stabilized even when using a lens without Image Stabilizer. When using a lens with built-in optical Image Stabilizer, set the lens’s Image Stabilizer switch to <1>. 1 Select [z: Movie digital IS]. 2 Select an item. zzDisable (v) Image stabilization with Movie digital IS is disabled.
Movie Digital IS Combination IS Even more effective correction is possible by recording movies with Movie digital IS and a Combination IS-compatible lens, which will combine optical and digital image stabilization by the lens and camera. oo Movie digital IS will not function when the lens’s optical Image Stabilizer switch is set to <2>. oo Although movies can also be recorded with Movie digital IS when using EF-S lenses or movie cropping, the shooting area is further reduced.
Recording Time-lapse Movies Still photos shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, celestial motion, etc.
Recording Time-lapse Movies the shooting interval. 5 Set zz Select [Interval] (sec.). Use the (1) (2) keys to set a value, then press <0>. zz Refer to [k: Time required] (1) and [3: Playback time] (2) to set the number. When [Custom] is set zz Select [Interval] (min.:sec.). (An interval of once per second is not available.) zz Press <0> to display . zz Set the desired number, then press <0>. (Returns to .) zz Select [OK] to register the setting. the number of shots. 6 Set zz Select [No.
Recording Time-lapse Movies the desired movie recording 7 Select size. zzH (3840×2160) The movie is recorded in 4K quality. The aspect ratio is 16:9. The frame rate is 29.97 fps (6) for NTSC and 25.00 fps (5) for PAL, and movies are recorded in MP4 (C) format with ALL-I (W) compression. zzL (1920×1080) The movie will be recorded in Full High-Definition (Full HD) quality. The aspect ratio is 16:9. The frame rate is 29.97 fps (6) for NTSC and 25.
Recording Time-lapse Movies 8 Configure [Auto exposure]. zzFixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots. Other shooting-related settings for the first shot will also be applied for subsequent shots. zzEach frame Metering is also performed for each subsequent shot to set the exposure automatically to match the brightness.
Recording Time-lapse Movies the beeper. 10Set zz Select [Beep as img taken]. zz If [Disable] is set, the beeper will not sound for shooting. 11 Check the settings. (1) (2) (1) Time required Indicates the time required to shoot the set number of shots with the set interval. If it exceeds 24 hours, “*** days” will be displayed.
Recording Time-lapse Movies the message. 13 Read zz Read the message and select [OK]. test shots. 14 Take zz As with still photo shooting, set the exposure and shooting functions, then press the shutter button halfway to focus. zz Press the shutter button completely to take test shots. The still photos will be recorded to the card. zz If there are no problems with the test shots, go to the next step. zz To take test shots again, repeat this step. oo Test shots are captured in JPEG 73 quality.
Recording Time-lapse Movies the movie shooting button. 15 Press gg The camera will be ready to start recording a time-lapse movie. zz To return to step 14, press the movie shooting button again. the time-lapse movie. 16 Record zz Press the button and check (1) 268 (2) again the “Time required (1)” and “Interval (2)” displayed on the screen. zz Press the shutter button completely to start recording the time-lapse movie. zz AF will not work during time-lapse movie recording.
Recording Time-lapse Movies oo Using a tripod is recommended. oo Taking test shots as in step 14 and recording test movies for time-lapse movies beforehand is recommended. oo The movie’s field of view coverage for both the 4K and Full HD time-lapse movie recording is approx. 100%. oo To cancel the time-lapse movie recording in progress, either press the shutter button completely or press the movie shooting button. The time-lapse movie shot so far will be recorded on the card.
Recording Time-lapse Movies oo Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. oo Time-lapse movies cannot be recorded when the camera is connected to a computer with the interface cable, or when an HDMI cable is connected. oo Movie Servo AF will not function. oo If the shutter speed is 1/30 sec.
Recording Time-lapse Movies oo If the shutter speed exceeds the shooting interval (such as for long exposures), or if a slow shutter speed is set automatically, the camera may not be able to shoot at the set interval. Shooting may also be prevented by shooting intervals nearly the same as the shutter speed. oo If the next scheduled shot is not possible, it will be skipped. This may shorten the recording time of the created time-lapse movie.
Recording Time-lapse Movies oo If you start time-lapse movie recording while the white temperature warning (=291) is displayed, the image quality of the time-lapse movie may decline. It is recommended that you start time-lapse movie recording after the white disappears (camera’s internal temperature decreases). oo With [Auto exposure] set to [Each frame], ISO speed, shutter speed, and aperture may not be recorded in the time-lapse movie Exif information in some modes.
Recording Time-lapse Movies oo You can use Wireless Remote Control BR-E1 (sold separately) to start and stop the time-lapse movie recording. With Wireless Remote Control BR-E1 • First pair the Wireless Remote Control BR-E1 with the camera (=399). • Set [z: Remote control] to [Enable]. • Take test shots, then when the camera is ready to shoot (as in step 15 on =268), set the BR-E1’s release mode/movie shooting switch to (immediate release) or <2> (release after 2-sec. delay).
Recording Video Snapshots Record a series of short video snapshots, each a few seconds long, and the camera will combine them to create a video snapshot album that shows these highlights of your trip or event. Video snapshots are available when the movie recording size is set to L6X (NTSC) or L5X (PAL). Video snapshot albums can also be played back with background music (=336).
Recording Video Snapshots 4 Select [Album settings]. [Create a new album]. 5 Select zz Read the message and select [OK]. the playback time. 6 Specify zz Specify playback time per video snapshot. the playback effect. 7 Specify zz This setting determines how fast albums are played back. the required recording time. 8 Check zz The time required to record each video snapshot is indicated (1), based on the playback time and effect.
Recording Video Snapshots the menu. 9 Close zz Press the button to close the (2) menu. gg A blue bar is displayed to indicate the recording time (2). zz Go to “Creating Video Snapshot Albums”. Creating Video Snapshot Albums the first video snapshot. 10Record zz Press the movie shooting button to start recording. gg The blue bar indicating recording time gradually decreases, and after the specified time elapses, recording stops automatically. gg A confirmation message is displayed (=277).
Recording Video Snapshots recording video snapshots. 13 Stop zz Set [Video snapshot] to [Disable]. To return to normal movie recording, be sure to specify [Disable]. zz Press the button to close the menu and return to normal movie recording. Options in Steps 11 and 12 Function Description J Save as album (step 11) Saves the clip as the first video snapshot in an album. J Add to album (step 12) Adds the current video snapshot to the album recorded most recently.
Recording Video Snapshots Adding to an Existing Album [Add to existing album]. 1 Select zz Follow step 5 on =275 to select [Add to existing album]. an existing album. 2 Select zz Turn the <5> dial to select an existing album, then press <0>. zz Select [OK]. gg Some video snapshot settings will be updated to match settings of the existing album. the menu. 3 Close zz Press the button to close the menu. gg The video snapshot recording screen is displayed. a video snapshot.
Recording Video Snapshots General Video Snapshot Precautions oo No sound is recorded when you set [Playback effect] to [1/2x speed] or [2x speed]. oo Recording time per video snapshot is only approximate. It may differ slightly from the actual recording time indicated during playback, due to the frame rate and other factors.
Setting Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. 1 Select [z: Movie Servo AF]. 2 Select [Enable]. zzWhen [Enable] is set: The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. To keep the focus at a specific position, or if you prefer not to record mechanical sounds from the lens, you can temporarily stop Movie Servo AF by touching [Z] in the lower left of the screen.
Setting Movie Servo AF Cautions When [Movie Servo AF] is Set to [Enable] oo Recording Conditions that Make Focusing Difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. • When shooting with a higher f/number. • Also see “Shooting Conditions that Make Focusing Difficult” on =197. oo Since the lens is driven continuously and the battery power is consumed, the possible movie recording time (=586) will be shortened.
Setting Movie Servo AF Movie Servo AF Track Sensitivity You can adjust the tracking sensitivity (to one of seven levels), which affects responsiveness if the subject strays from the AF point during Movie Servo AF, as when interfering objects move across AF points or when you pan. [z: Movie Servo AF track 1 Select sens.]. zz Locked on: –3/–2/–1 With this setting, the camera is less likely to track a different subject if the main subject strays from the AF point.
Setting Movie Servo AF Movie Servo AF Speed You can set the Movie Servo AF’s AF speed and its operation conditions. The function is enabled when using a lens supporting slow focus transition during movie recording*. 1 Select [z: Movie Servo AF speed]. zz When active: You can set [Always on] to have the AF speed take effect at all times for movie recording (before and during movie recording) or set [During shooting] to have the AF speed take effect only during movie recording.
Setting Movie Servo AF oo With certain lenses, even if you adjust the AF speed, the speed may not change. oo Has no effect (setting is disabled) when 4K movie recording is set. oo Available when [z: Movie Servo AF] is set to [Enable] and [z: AF method] is set to [1-point AF]. oo Operation when [z: AF method] is set to an option other than [1-point AF] is equivalent to setting [AF speed] to [Standard (0)].
Other Menu Functions [z2] zzLens aberration correction Peripheral illumination, distortion, and chromatic aberration can be corrected as you record movies. For details on lens aberration correction, see =123. zzRemote control shooting When [Enable] is set, you can start or stop movie recording using Wireless Remote Control BR-E1 (sold separately). First, pair the BR-E1 with the camera (=399).
Other Menu Functions [z3] zzk ISO speed settings ISO speedM In [M] mode, you can set the ISO speed manually. You can also select ISO Auto. ISO speed range When recording Full HD/HD movies or Full HD time-lapse movies, you can set the manual ISO speed setting range (minimum and maximum). Range for H When recording 4K or 4K time-lapse movies, you can set the manual ISO speed setting range (minimum and maximum).
Other Menu Functions zzHighlight tone priority You can reduce overexposed, clipped highlights as you record movies. For details on Highlight tone priority, see =137. oo [Enhanced] is not available (not displayed) when recording movies with [z: Highlight tone priority] set.
Other Menu Functions zzk Auto slow shutter You can choose whether to shoot movies that are brighter and less affected by image noise than when set to [Disable] by automatically slowing the shutter speed under low light. Available in [k] shooting mode. Applies when the frame rate of the movie recording size is 8 or 7. Disable Enables you to record movies with smoother, more natural movement, less affected by subject shake than when set to [Enable].
Other Menu Functions zzk Av 1/8-stop incrementsM You can set aperture values on a finer scale when recording movies with an RF lens. Available in [M] shooting mode. Select [Enable] to change the aperture increment from 1/3 stop (or 1/2 stop) to 1/8 stop. oo [kAv 1/8-stop incr.] is not available (not displayed) when EF or EF-S lenses are used. oo When set to [Enable], setting options in [8C.Fn I-1: Exposure level increments] are disabled and have no effect.
Other Menu Functions [z4] zzHDMI info disp You can configure information display for image output via an HDMI cable. zzWith info The image, shooting information, AF points, and other information is shown on the other device via HDMI. Note that the camera screen goes off. Recorded movies are saved to the card. zzClean / H output HDMI output consists solely of 4K movies. Shooting information and AF points are also displayed on the camera, but no image is recorded to the card.
General Movie Recording Cautions Red Internal Temperature Warning Icon oo If the camera’s internal temperature increases due to prolonged movie recording or under a high ambient temperature, a red icon will appear. oo The red icon indicates that movie recording will soon be terminated automatically. If this happens, you will not be able to shoot again until the camera’s internal temperature decreases. Turn off the power and let the camera rest for a while.
General Movie Recording Cautions Recording and Image Quality oo If you use a card with a slow writing speed, an indicator may appear on the right of the screen during movie recording. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory). The slower the card, the faster the indicator will climb upward. If the indicator (1) becomes (1) full, movie recording will stop automatically.
Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the Playback ([x]) tab. Images shot and saved with another device Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer.
Tab Menus: Playback zzPlayback 1 =310 =313 =314 =318 =322 zzPlayback 2 =325 =331 =333 =334 zzPlayback 3 =337 =339 =340 =343 =345 =347 oo [3: RAW image processing] and [3: Quick Control RAW processing] are not displayed in Basic Zone modes.
Tab Menus: Playback zzPlayback 4 =349 =351 =352 =353 =354 =355 295
Image Playback Single-Image Display back the image. 1 Play zz Press the button. an image. 2 Select zz To play back newer images, press the button, and to play back older images, press the button. zz Each time you press the button, the display will change. No information Basic information display Shooting information display the image playback. 3 Exit zz Press the button to exit the image playback.
Image Playback Shooting Information Display With the shooting information screen displayed, you can press the keys to change the information displayed. You can also customize the information displayed, in [x: Playback information display] (=349).
Image Playback Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the button to prepare for touch playback. Image browsing Jump display Index display Magnified view ooYou can also magnify display by double-tapping with one finger.
Magnifying Images You can magnify your captured images. the image. 1 Magnify zz During image playback, press the button. gg The magnified view will appear. The magnified area position (1) and [6u] will be displayed on the lower right of the screen. zz To magnify images, turn the <6> dial clockwise. zz To reduce magnification, turn the <6> dial counterclockwise. For index display (=300), keep turning the dial. (1) the image.
Index Display (Multiple-Image Display) Search for images quickly with the index display showing 4, 9, 36, or 100 images on one screen. the button. 1 Press zz During image playback, press the button. gg [6u] will be displayed on the lower right of the screen. to the index display. 2 Switch zz Turn the <6> dial counterclockwise. gg The 4-image index display will appear. The selected image is highlighted with an orange frame.
Playing Back Movies back the image. 1 Play zz Press the button. a movie. 2 Select zz Use the keys to select the movie to play back. zz In the single-image display, the icon displayed on the upper left indicates a movie. zz In the index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played back from the index display, press <0> to switch to the single-image display. the single-image display, press 3 In<0>. <0> to play back the 4 Press movie.
Playing Back Movies Movie Playback Panel Item Playback Operations 7 Play Pressing <0> toggles between playback and stop. 8 Slow motion Adjust the slow motion speed with the keys. The slow motion speed is indicated on the upper right of the screen. T Skip backward Skips backward 4 sec. each time you press <0>. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie. 6 Next frame Plays the movie frame-by-frame each time you press <0>.
Playing Back Movies Movie Playback Panel (Video Snapshot Albums) Item Playback Operations 7 Play Pressing <0> toggles between playback and stop. 8 Slow motion Adjust the slow motion speed with the keys. The slow motion speed is indicated on the upper right of the screen. T Previous clip Displays the first frame of the previous video snapshot. 3 Previous frame Displays the previous frame each time you press <0>. Holding <0> down will rewind the movie.
Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. movie playback. 1 Pause gg The movie playback panel will appear. the movie playback panel, 2 On select [X]. the part to be edited out. 3 Specify zz Select either [U] (Cut beginning) or [V] (Cut end). zz Press the keys for frame-byframe playback. zz After deciding which part to edit out, press <0>. The portion indicated by a line at the bottom of the screen will remain.
Editing a Movie’s First and Last Scenes the image. 5 Save zz Select [W] (1). (1) (2) zz The save screen will appear. zz To save it as a new movie, select [New file]. To save it and overwrite the original movie file, select [Overwrite]. ] (2) to save a compressed zz Select [ version of the file. 4K movies are converted to Full HD movies before compression. zz On the confirmation dialog, select [OK] to save the edited movie and return to the movie playback screen.
Grabbing a Frame from 4K Movies or 4K Time-Lapse Movies From 4K movies or 4K time-lapse movies, you can select individual frames to save as approx. 8.3-megapixel (3840×2160) JPEG still images. This function is called “Frame Grab (4K frame capture)”. back the image. 1 Play zz Press the <3> button. a 4K movie. 2 Select zz Use the keys to select a 4K movie or 4K time-lapse movie. zz On the shooting information screen (=599), 4K movies and 4K time-lapse movies are indicated by an [H] icon.
Grabbing a Frame from 4K Movies or 4K Time-Lapse Movies the image. 7 Save zz Select [OK] to save the current frame as a JPEG still image. the image to display. 8 Select zz Check the destination folder and image file number. zz Select [View original movie] or [View extracted still image]. oo Frame grabbing is not possible with Full HD movies, Full HD time-lapse movies, or with 4K movies or 4K time-lapse movies from a different camera.
Playback on a TV By connecting the camera to a television with an HDMI cable, you can play back the captured still photos and movies on the television. Using the HDMI Cable HTC-100 (sold separately) is recommended. If the image does not appear on the TV screen, check if the [5: Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television). the HDMI cable to the 1 Connect camera.
Playback on a TV oo Adjust movie sound volume with the television. The sound volume cannot be adjusted with the camera. oo Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. oo Depending on the television, part of the image displayed may be cut off. oo Do not connect any other device’s output to the camera’s terminal. Doing so may cause a malfunction. oo Certain televisions may not display the images due to incompatibility.
Protecting Images You can protect important images from being accidentally erased. Protecting a Single Image 1 Select [3: Protect images]. 2 Select [Select images]. an image. 3 Select zz Use the keys to select the image to protect. (1) the image. 4 Protect zz Press <0> to protect the selected image. The icon (1) will appear at the top of the screen. zz To cancel the image protection, press <0> again. The icon will disappear. zz To protect another image, repeat steps 3 and 4.
Protecting Images Specifying the Range of Images to be Protected While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. [Select range]. 1 Select zz Select [Select range] in [3: Protect images]. the range of images. 2 Specify zz Select the first image (start point). zz Next, select the last image (end point). gg The images in the specified range will be protected and the icon will appear.
Protecting Images Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [3: Protect images], all the images in the folder or on the card will be protected. To cancel the selection, select [Unprotect all images in folder] or [Unprotect all images on card].
Rotating Images You can use this feature to rotate the displayed image to the desired orientation. 1 Select [3: Rotate image]. an image. 2 Select zz Use the keys to select the image to rotate. the image. 3 Rotate zz Each time you press <0>, the image will rotate clockwise as follows: 90° → 270° → 0°. zz To rotate another image, repeat steps 2 and 3. oo If you set [5: Auto rotate] to [OnzD] (=366) before taking vertical shots, you need not rotate the image with this function.
Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images (=310) will not be erased. oo Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a Single Image the image to be erased. 1 Select zz Press the button. zz Use the keys to select the image to erase. 2 Press the button.
Erasing Images Checkmarking [X] Images to Be Erased in a Batch By adding checkmarks to the images to be erased, you can erase all those images at once. 1 Select [3: Erase images]. 2 Select [Select and erase images]. an image. 3 Select zz Use the keys to select the image to erase, then press <0>. zz To select another image to be erased, repeat step 3. the images. 4 Erase zz Press the button, then press [OK].
Erasing Images Specifying the Range of Images to Be Erased While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. [Select range]. 1 Select zz Select [Select range] in [3: Erase images]. the range of images. 2 Specify zz Select the first image (start point). zz Next, select the last image (end point). 3 Press the button. the images. 4 Erase zz Select [OK].
Erasing Images Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When [3: Erase images] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be erased. If the search conditions are set with [3: Set image search conditions] (=345), the display will change to [All found images]. If you select [All found images], all the images filtered by the search conditions will be erased.
Digital Print Order Format (DPOF) DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc. The print settings will be applied to all the images specified for printing.
Digital Print Order Format (DPOF) the setting. 4 Exit zz Press the button. zz Next, select [Sel.Image] or [Multiple] to specify the images to be printed. oo If you print an image with a large image size using the [Index] or [Both] setting (=318), the index print may not be printed with certain printers. In this case, resize the image (=339), then print the index print. oo Even if [Date] and [File No.
Digital Print Order Format (DPOF) Specifying Images for Printing zzSelecting Images Select and specify the images one by one. Press the button to save the print order to the card. (1) (2) zz Standard / Both Press <0> to print a copy of the displayed image. By pressing the keys, you can set the number of copies to be printed up to 99. (1) (2) (3) (4) Quantity Total images selected zz Index Press <0> to add a checkmark to the box [X]. The image will be included in the index print.
Digital Print Order Format (DPOF) All Images in a Folder Select [Mark all in folder] and select the folder. A print order for one copy of all the images in the folder will be specified. If you select [Clear all in folder] and select the folder, the print order for all the images in the folder will be canceled. All Images on a Card If you select [Mark all on card], one copy of all the images on the card will be specified for printing.
Specifying Images for a Photobook You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to import images to a computer, the specified images for a photobook will be copied to a dedicated folder. This function is useful for ordering photobooks online. Specifying One Image at a Time 1 Select [3: Photobook Set-up]. 2 Select [Select images]. the image to be specified. 3 Select zz Use the keys to select an image, then press <0>.
Specifying Images for a Photobook Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the range (start point to end point) of images to be specified for a photobook at once. [Multiple]. 1 Select zz Under [3: Photobook Set-up], select [Multiple]. 2 Select [Select range]. the range of images. 3 Specify zz Select the first image (start point). zz Next, select the last image (end point).
Specifying Images for a Photobook Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at once for a photobook. Under [x: Photobook Set-up], you can set [Multiple] to [All images in folder] or [All images on card] to specify all the images in the folder or on the card for a photobook. To cancel the selection, select [Clear all in folder] or [Clear all on card].
Processing RAW Images with the Camera N You can process 1 or F images with the camera to create JPEG images. RAW images are not affected, so different conditions can be applied to create JPEGs. You can also use Digital Photo Professional (EOS software) to process RAW images. [3: RAW image 1 Select processing]. an item, then select images. 2 Select zz You can select multiple images to process at once. Select images zz Use the keys to select images to process, then press <0>.
Processing RAW Images with the Camera the desired processing 3 Set conditions. Use shot settings zz Images are processed using image settings at the time of capture. Customize RAW processing zz Use the keys to select an item. zz Turn the <6> or <5> dial to switch the setting. zz Press <0> to access the function setting screen. zz To return to the image settings at the time of shooting, press the button.
Processing RAW Images with the Camera the image to display. 5 Select zz Select [Original image] or [Processed img.]. Magnified View You can magnify images displayed for [Customize RAW processing] by pressing the button. Magnification varies depending on the [Image quality] setting. Using cross keys, you can scroll the magnified image vertically and horizontally. To cancel the magnified view, press the button again.
Processing RAW Images with the Camera RAW Image Processing Options zz[ ] Brightness adjustment zz[ ] White balance (=140) zz[ ] Picture Style (=148) You can adjust the image brightness up to ±1 stop in 1/3-stop increments. You can select the white balance. If you select [Q], you can select [Auto: Ambience priority] or [Auto: White priority]. If you select [P], you can set the color temperature. You can select the Picture Style. You can adjust the sharpness, contrast, and other parameters.
Processing RAW Images with the Camera zz[ ] Color space (=147) zz[ ] Lens aberration correction You can select either sRGB or Adobe RGB. Since the camera screen is not compatible with Adobe RGB, the difference in the image will hardly be perceptible when either color space is set. [ ] Peripheral illumination correction (=124) [ ] Distortion correction (=124) [ ] Digital Lens Optimizer (=125) A phenomenon that makes the image corners look darker due to the lens characteristics can be corrected.
Processing RAW Images with the Camera [ ] Chromatic aberration correction (=126) [ ] Diffraction correction (=126) Chromatic aberrations (color fringing along the subject’s outline) due to the lens characteristics can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image (=299). The diffraction by the lens aperture degrading the image sharpness can be corrected. If [Enable] is set, the corrected image will be displayed.
Applying Your Favorite Effects (Creative Assist) You can process RAW images by applying your preferred effects and saving as JPEGs. 1 Select [3: Creative Assist]. an image. 2 Select zz Use the keys to select images to process, then press <0>. an effect level. 3 Select zz Use the keys to select the effect. zz By selecting [Preset] and pressing <0>, you can choose [Vivid], [Soft], or other preset effects.
Applying Your Favorite Effects (Creative Assist) zz You can adjust effects such as [Brightness] or [Contrast] by pressing <0> and then using the keys. zz Press <0> when adjustment is finished. zz To reset the effect, press the button. zz To confirm the effect, press the button. 4 Select [OK] to save the image.
Selecting the Type of RAW Image Processing You can select the type of RAW image processing performed from the Quick Control screen. [3: Quick Control RAW 1 Select processing]. an item. 2 Select zz Creative Assist RAW processing that applies your preferred effect (=331). zz RAW image processing RAW processing according to conditions you specify (=325).
Editing Video Snapshot Albums You can rearrange, delete, or play back the video snapshots in an album. 1 Select [3: Create album]. an album to edit. 2 Select zz Press <0> to add a checkmark [X]. zz After selection, press the button. 3 Select [OK]. 4 Select an editing option.
Editing Video Snapshot Albums Option Description Use the keys to select a video snapshot to move, T Rearrange video then press <0>. Use the keys to move it, then snapshots press <0>. L Remove video snapshot Use the keys to select a video snapshot to delete, then press <0>. Selected video snapshots are labeled [L]. To clear the selection and remove [L], press <0> again. 7 Play video snapshot Use the keys to select a video snapshot to play, then press <0>.
Editing Video Snapshot Albums Selecting Background Music Albums and slideshows can be played with background music once you copy the music to the card, using EOS Utility (EOS software). [Background music]. 1 Select zz Set [Background music] to [On]. the background music. 2 Select zz Use the keys to select the music, then press <0>. For [Slide show], you can select multiple tracks. to a sample. 3 Listen zz To listen to a sample, press the button.
Cropping JPEG Images You can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG images. Images shot in RAW cannot be cropped. 1 Select [x: Cropping]. an image. 2 Select zz Use the keys to select the image to crop. the cropping frame. 3 Set zz Press <0> to display the cropping frame. zz The image area within the cropping frame will be cropped. zzChanging the Cropping Frame Size Turn the <6> dial to change the cropping frame size.
Cropping JPEG Images zzMoving the Cropping Frame Press the cross keys to move the frame vertically or horizontally. Move the cropping frame until it covers the desired image area. zzCorrecting the Tilt You can correct image tilt by ±10°. Turn the <5> dial to select , then press <0>. While checking the tilt against the grid, turn the <5> dial (in 0.1° increments) or tap the left or right wedge (in 0.5° increments) on the upper left of the screen to correct the tilt.
Resizing JPEG Images You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3, 4, and a images. JPEG b and RAW images cannot be resized. 1 Select [3: Resize]. an image. 2 Select zz Use the keys to select the image to resize. the desired image size. 3 Select zz Press <0> to display the image sizes. zz Select the desired image size (1).
Setting Ratings You can rate images on a scale of 1–5 (l/m/n/o/p). This function is called rating. Rating a Single Image 1 Select [3: Rating]. 2 Select [Select images]. the image to be rated. 3 Select zz Use the keys to select the image to rate. the image. 4 Rate zz Press <0>, and a blue highlight frame will appear as shown in the screen shown on the left. zz Use the keys to select a rating mark, then press <0>.
Setting Ratings Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. [Select range]. 1 Select zz Select [Select range] in [3: Rating]. the range of images. 2 Specify zz Select the first image (start point). zz Next, select the last image (end point). gg A checkmark [X] will be appended to all the images within the range between first and last images. 3 Press the button.
Setting Ratings Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [3: Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated. Turn the <6> dial to select a rating, then select [OK]. When you are not rating images or cancelling the rating, select [OFF].
Slide Show (Auto Playback) You can play back the images on the card as an automatic slide show. the images to be played 1 Specify back. zz To play back all the images on the card, go to step 2. zz If you want to specify the images to be played back in the slide show, filter the images with [3: Set image search conditions] (=345). 2 Select [3: Slide show]. the playback as desired. 3 Set zz Select [Set up].
Slide Show (Auto Playback) Display time Repeat Transition effect Background music the slide show. 4 Start zz Select [Start]. gg After [Loading image...] is displayed, the slide show will start. the slide show. 5 Exit zz To exit the slide show and return to the setting screen, press the button. oo To pause the slide show, press <0>. During pause, [G] will be displayed on the upper left of the image. Press <0> again to resume the slide show.
Filtering Images for Playback You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, erase, play a slide show, and apply other operations to filtered images. [3: Set image search 1 Select conditions]. the search conditions. 2 Set zz Use the keys to select an item. zz Use the keys to set the setting.
Filtering Images for Playback the search conditions. 3 Apply zz Press <0> and read the message displayed. zz Select [OK]. gg The search condition is specified. the found images. 4 Display zz Press the <3> button. (2) gg Only the images that match the set conditions (filtered) will be played back. gg When the images are filtered for display, the screen will have an outer yellow frame (2).
Jump Display (Jumping Through Images) In the single-image display, you can turn the <6> dial to jump through the images forward or backward according to the jump method set. 1 Select [x: Image jump w/6]. 2 Select the jump method. oo With [Jump images by the specified number], you can turn the <6> dial to select the number of images to jump by. oo When you select [Display by image rating], turn the <6> dial to specify the rating (=340).
Jump Display (Jumping Through Images) by jumping. 3 Browse zz Press the button. zz In the single-image display, turn the <6> dial. gg You can browse by the set method. (1) (2) (1) (2) Jump method Playback position oo To search images by shooting date, select [g: Date]. oo To search images by folder, select [h: Folder]. oo If the card contains both movies and still photos, select [i: Movies] or [j: Stills] to display one or the other.
Customizing Playback Information Display You can specify screens and accompanying information displayed during image playback. [3: Playback information 1 Select display]. a checkmark [X] next to the 2 Add number of screens to display. zz Use the keys to select a number. zz Press <0> to add a checkmark [X]. zz Repeat these steps to add a checkmark [X] to the number of each screen to display, then select [OK].
Customizing Playback Information Display zz[Brightness] display This histogram is a graph showing the distribution of the image’s brightness level. The horizontal axis indicates the brightness level (darker on the left and brighter on the right) while the vertical axis indicates how many pixels exist for each brightness level. The more pixels there are toward the left, the darker the image. The more pixels there are toward the right, the brighter the image.
Displaying the Highlight Alert You can specify blinking display of overexposed highlights on the playback screen. To obtain more detailed gradation in the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again for a better result. 1 Select [3: Highlight alert]. 2 Select [Enable].
Displaying AF Points You can display the AF points that were used to focus, which will be outlined in red on the playback screen. If automatic AF point selection is set, multiple AF points may be displayed. 1 Select [3: AF point disp.]. 2 Select [Enable].
Displaying a Grid You can display a grid over still photos shown in single-image display on the playback screen. This function is convenient for checking the image’s vertical or horizontal tilt as well as composition. 1 Select [3: Playback grid]. 2 Select an item.
Specifying Initial Image Display When Playback Begins You can specify which image is displayed first when you start image playback. 1 Select [3: View from last seen]. an item. 2 Select zz [Enable]: Playback resumes from the last image displayed (except when you have just finished shooting). zz [Disable]: Playback resumes from your most recent shot whenever the camera is restarted.
Setting the Initial Magnification Ratio and Position You can set the initial magnification ratio and position for the magnified view. 1 Select [3: Magnificatn (apx)]. 2 Select an item. zz1x (no magnification) The image is not magnified. The magnified view will start with the singleimage display. zz2x, 4x, 8x, 10x (magnify from center) The magnified view starts at the image center at the selected magnification.
Set-up This chapter describes menu settings on the set-up ([5]) tab. zz A M icon to the right of a page title indicates that the function is available only in , , , , , or mode.
Tab Menus: Set-up zzSet-up 1 =361 =363 =366 =367 =369 =370 zzSet-up 2 =371 =372 =373 =374 =377 zzSet-up 3 =378 =379 =380 =381 =382 =386 =387 358
Tab Menus: Set-up zzSet-up 4 =388 =393 =393 =394 =395 =397 zzSet-up 5 =398 =402 zzSet-up 6 =407 =408 =410 =411 =413 =413 =413 359
Tab Menus: Set-up When you are recording movies, the following screen is displayed for [54] and [56]. zzSet-up 4 =388 =393 =394 =395 =397 zzSet-up 6 =407 =410 =411 =413 =413 In Basic Zone and [HDR Movie] modes, the following screen is displayed for [56].
Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. Creating a Folder 1 Select [5: Select folder]. 2 Select [Create folder]. 3 Select [OK].
Creating and Selecting a Folder Selecting a Folder (1) (3) (2) (4) zz Select a folder on the folder selection screen. zz Captured images are stored in your selected folder. (1) (2) (3) (4) Number of images in folder Lowest file number Folder name Highest file number Folders oo A folder can contain up to 9999 images (file number 0001–9999). When a folder becomes full, a new folder with the folder number increased by one is created automatically.
File Numbering Methods The captured images saved in a folder are assigned a file number from 0001 to 9999. You can change how the image files are numbered. (Example) IMG_0001.JPG File number 1 Select [5: File numbering]. the item. 2 Set zz Select [Numbering]. zz Select [Continuous] or [Auto reset]. zz If you want to reset the file numbering, select [Manual reset] (=365). zz Select [OK] to create a new folder, and the file number will start with 0001.
File Numbering Methods Continuous When you wish to continue the file numbering sequence even after the card is replaced or a new folder is created. Even after you replace the card or create a new folder, the file numbering continues in sequence up to 9999. This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
File Numbering Methods Auto Reset When you wish to restart the file numbering from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders.
Setting the Auto Rotation of Vertical Images You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. 1 Select [5: Auto rotate]. 2 Select an item. zzOnzD Automatically rotates images for display on both the camera and computers. zzOnD Automatically rotates images only for display on computers. zzOff oo Images captured with auto rotation set to [Off] will not rotate during playback even if you later set auto rotation to [On].
Formatting Memory Cards If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. oo When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc. before formatting the card. 1 Select [5: Format card]. the card. 2 Format zz Select [OK].
Formatting Memory Cards Format the Card in the Following Cases: zz The card is new. zz The card was formatted by a different camera or a computer. zz The card is full of images or data. zz A card-related error is displayed (=581). Low-Level Formatting zz Perform low-level formatting if the card’s writing or reading speed seems slow or if you want to totally erase the data on the card.
Displaying the Shooting Mode Guide A brief description of the shooting mode can be displayed when you switch shooting modes. 1 Select [5: Mode guide]. 2 Select [Enable]. the Mode dial. 3 Turn gg A brief description of the selected shooting mode is displayed. zz To display more details, press the key. zz To clear the mode guide, press <0>. In <8> or mode, the shooting mode selection screen is displayed.
Displaying the Feature Guide A brief description of functions and items can be displayed when you use Quick Control setting. 1 Select [5: Feature guide]. 2 Select [Enable]. oo To clear a description, either tap it or continue performing operations.
Setting Eco Mode Enables you to conserve battery power in shooting mode. When the camera is not in use, the screen darkens to reduce battery consumption. 1 Select [5: Eco mode]. [On]. 2 Select zz The screen darkens when the camera is not used for approx. two seconds. Approx. ten seconds after darkening, the screen turns off. zz To activate the screen and prepare for shooting when the screen is off, press the shutter button halfway.
Setting Power-Saving Features You can adjust the timing of when the screen, camera, and viewfinder turn off automatically (Display off, Auto power off, and Viewfinder off). 1 Select [5: Power saving]. an item. 2 Select zz Even when [Auto power off] is set to [Disable], the screen will turn off after the time set in [Display off]. oo [Display off] and [Auto power off] settings do not apply when Eco mode is set to [On].
Adjusting the Screen Brightness Screen and viewfinder brightness can be adjusted separately. 1 Select [5: Disp. brightness]. the adjustment. 2 Make zz Referring to the gray chart, use the keys to adjust the brightness, then press <0>. zz When adjusting viewfinder brightness, look through the viewfinder as you set it. oo To check the image’s exposure, referring to the histogram (=349) is recommended.
Setting the Date, Time, and Time Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow the steps below to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it. Since the captured images will be appended with the shooting date and time information, be sure to set your date/time. 1 Select [5: Date/Time/Zone]. the time zone.
Setting the Date, Time, and Time Zone zz Use the keys to select a [Time difference] item (+/–/hour/ minute), then press <0>. zz Use the keys to set it, then press <0>. zz After entering the time zone or time difference, use the keys to select [OK], then press <0>. the date and time. 3 Set zz Use the keys to select an item, then press <0>. zz Use the keys to set it, then press <0>. the daylight saving time. 4 Set zz Set it as necessary.
Setting the Date, Time, and Time Zone oo The date, time, and time zone settings may be reset when the camera is stored without the battery, when its battery becomes exhausted, or when it is exposed to below freezing temperatures for a prolonged period. If this happens, set them once again. oo After changing [Zone/Time difference], check that the correct date/time are set. oo Auto power off time may be extended while the [5: Date/Time/Zone] screen is displayed.
Setting the Interface Language 1 Select [5: LanguageK]. 2 Set the desired language.
Setting the Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. 1 Select [5: Video system]. an item. 2 Select zz NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). zz PAL For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
Setting the Touch Control Response 1 Select [5: Touch control]. an item. 2 Select zz [Standard] is the normal setting. zz [Sensitive] provides a more reactive touch-screen panel response than [Standard]. zz To disable touch operations, select [Disable]. Cautions for Touch Control Operations oo Do not use sharp objects such as fingernails or ballpoint pens for touch operations. oo Do not use wet fingers for touch operations.
Disabling Beeps for Camera Operations You can disable beeping when subjects are in focus or for other operations. 1 Select [5: Beep]. an item. 2 Select zz Touch The beeper will be silent only for touch operations. zz Disable Disables beeping when subjects are in focus, when you shoot with the self-timer, and when you use touch operations.
Checking the Battery Information You can check the conditions of the battery you are using. 1 Select [5: Battery info.]. (1) (2) (1) (2) (3) (4) (3) (4) Battery position Model of battery or household power outlet accessory used. Battery level (=47). Battery’s recharge performance level is displayed. (Green) : Battery’s recharge performance is good. (Green) : Battery’s recharge performance is slightly degraded. (Red) : Purchasing a new battery is recommended.
Sensor Cleaning The camera’s sensor cleaning feature cleans the front of the image sensor. Activating Immediate Cleaning 1 Select [5: Sensor cleaning]. [Clean nowf]. 2 Select zz Select [OK] on the confirmation dialog.
Sensor Cleaning Setting Auto Cleaning 1 Select [Auto cleaningf]. an item. 2 Select zz Use the keys to select an item, then press <0>. oo For best results, clean with the camera in a stable position on a desk or other flat surface. oo Even if you repeat the sensor cleaning, the result will not improve much. Note that [Clean nowf] may not be available immediately after cleaning.
Sensor Cleaning Manual Sensor Cleaning Dust that could not be removed by automatic cleaning can be removed manually with a commercially available blower or similar tool. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. 1 Setting the power switch to <2>. the lens and clean the 2 Remove sensor. the cleaning. 3 End zz Attach the lens or body cap.
Sensor Cleaning oo During sensor cleaning, never set the power switch to <1>. This will cause the shutter to move, which may damage the image sensor or shutter curtains. oo The surface of the image sensor is extremely delicate. Clean the sensor with care. oo Use a plain blower without any brush attached. A brush can scratch the sensor. oo Do not insert the blower tip inside the camera beyond the lens mount. This may damage the shutter curtains. oo Never use pressurized air or gas to clean the sensor.
Setting the HDMI Output Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. 1 Select [5: HDMI resolution]. an item. 2 Select zz Auto The images will automatically be displayed at the optimum resolution matching the connected television. zz 1080p Output at 1080p resolution. Select if you prefer to avoid display or delay issues when the camera switches resolution.
RAW Playback on an HDR TV You can view RAW images in HDR by connecting the camera to an HDR TV. 1 Select [5: HDMI HDR output]. 2 Select [On]. oo Image operations such as RAW processing are not available during HDR display. oo JPEG images are used for HDR display in the case of L (ISO 50-equivalent) images or multiple-exposure RAW images. oo Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual.
Customizing Information Displayed When Shooting You can customize the details and screens of information shown on the camera or in the viewfinder when you shoot. Select [5: Shooting info. disp.]. Customizing Information on the Screen 1 Select [Screen info. settings]. screens. 2 Select zz Use the keys to select screens of information to show on the camera. zz For information you prefer not to display, press <0> to clear the checkmark [X]. zz To edit the screen, press the button. the screen.
Customizing Information Displayed When Shooting Customizing Information in the Viewfinder 1 Select [VF info/toggle settings]. screens. 2 Select zz Use the keys to select screens of information to show in the viewfinder. zz For information you prefer not to display, press <0> to clear the checkmark [X]. zz To edit the screen, press the button. the screen. 3 Edit zz Use the keys to select items to show in the viewfinder.
Customizing Information Displayed When Shooting Vertical Viewfinder Display You can select how viewfinder information is displayed when you are shooting still photos vertically. 1 Select [VF vertical display]. an item. 2 Select zz On Information is automatically rotated, making it easier to read. zz Off Information is not automatically rotated. Grid Display A grid can be displayed on the screen and viewfinder. 1 Select [Grid display]. 2 Select an item.
Customizing Information Displayed When Shooting Setting the Histogram You can select the content and display size of the histogram. 1 Select [Histogram disp]. an item. 2 Select zz Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]). zz Press button to confirm the setting. Setting Focus Distance Display You can display focus distance when using RF lenses. In focus distance display, you can select the timing and unit of measurement. 1 Select [Focus distance disp].
Customizing Information Displayed When Shooting Clearing Settings You can restore [Shooting info. disp.] to the default settings. 1 Select [Reset]. 2 Select [OK].
Setting a Priority for Shooting Display Performance You can select the performance option to prioritize in viewfinder display for still photos. 1 Select [5: Viewfinder performance]. 2 Select an item. Setting the Viewfinder Display Format You can select the viewfinder display format. 1 Select [5: VF display format]. an item. 2 Select zz Use the keys to select an item. zz Press <0> to set it.
Setting the Display Mode You can select the display mode for shooting screens. 1 Select [5: Display settings]. an item. 2 Select zz Auto Normally use the screen for display, but switch to the viewfinder when you look through it. zz Manual You can restrict display to the screen or viewfinder. screen or viewfinder display. 3 Select zz Press <0> to set it.
Customizing Shutter Button Functionality for Movie Recording You can set the functions performed by pressing the shutter button halfway or completely during movie recording. [5: Shutter btn function for 1 Select movies]. an item. 2 Select zz Half-press Specify the function performed by pressing the shutter button halfway. zz Fully-press (shown in mode) Specify the function performed by pressing the shutter button completely.
Help When [zHelp] is displayed below a menu, you can display a description about the feature by pressing the button. Press it again to exit Help display. To scroll the screen when a scrollbar (1) appears on the right, press the keys or turn the <5> dial.
Help Help Display Text Size You can change the text size for the Help display. 1 Select [5: Help text size]. 2 Select an item.
Setting Wireless Features You can connect the camera to a smartphone or computer wirelessly and send your shots or control the camera remotely. [5: Wireless communication 1 Select settings]. the item. 2 Set zz For details, see “Wi-Fi (Wireless Communication) Functions”.
Setting Wireless Features Shooting with a Remote Control You can shoot remotely by pairing the camera via Bluetooth with Wireless Remote Control BR-E1 (sold separately), which supports Bluetooth low energy technology. Pairing To use BR-E1, you must first pair (connect and register) the camera and remote control. [5: Wireless communication 1 Select settings]. 2 Select [Bluetooth function]. 3 Select [Bluetooth function]. [Remote]. 4 Select zz If the message “Register a nickname to identify the camera.
Setting Wireless Features [Pairing]. 5 Select zz Select [Pairing]. zz Press and hold the button and button on the BR-E1 simultaneously for 3 sec. or more. gg Pairing now begins. When pairing is complete, BR-E1 is registered on the camera. When shooting still photos When recording movies up the camera for remote 6 Set shooting. zz Select [Q] or [k] as the drive mode (=209). zz In [z: Remote control], select [Enable].
Setting Wireless Features Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. [5: Wireless communication 1 Select settings]. 2 Select [Bluetooth function]. [Check/clear connection 3 Select info]. 4 Press the button. the connection information. 5 Clear zz Select [OK].
Geotagging Images You can geotag images with GPS Receiver GP-E2 (sold separately) or a Bluetooth enabled smartphone. Using GP-E2 GP-E2 to the camera. 1 Attach zz Attach GP-E2 to the camera’s hot shoe and turn it on. For details, refer to the GP-E2 Instruction Manual. 2 Select [5: GPS device settings]. 3 Select [GPS receiver]. the picture. 4 Take zz For details on [Set up], refer to the GPE2 Instruction Manual.
Geotagging Images Using a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone. For details on installing Camera Connect, see =420. Specifying the smartphone as the GPS device the smartphone, activate 1 On location services. a Bluetooth connection. 2 Establish zz Connect the camera to a smartphone via Bluetooth. For details, see =421. 3 Select [5: GPS device settings].
Geotagging Images [Smartphone]. 4 Select zz Select [Smartphone] in [Select GPS device]. gg Location information can now be acquired from the smartphone. zz To check acquired geotag information (latitude, longitude, elevation, and Coordinated Universal Time (UTC)), select [GPS information display] on the [GPS device settings] screen. the picture. 5 Take zz Images are geotagged with the information from the smartphone.
Geotagging Images GPS connection display You can check the status of smartphone location information acquisition in the GPS connection icon on the screens for still photo or movie shooting (=591 and =593, respectively). Gray: Location services are off Blinking: Location information cannot be acquired On: Location information acquired For details on how GPS connection status is indicated when the GP-E2 is used, refer to the GP-E2 Instruction Manual.
Geotagging Images oo The smartphone can acquire location information only while it is paired with the camera via Bluetooth. oo Direction information is not acquired. oo Acquired location information may not be accurate, depending on traveling conditions or smartphone status. oo It may take some time to acquire location information from the smartphone after you turn the camera on. oo Location information is no longer acquired after any of the following operations.
Setting the Multi-Function Lock Specify camera controls to lock when the Multi-function lock is enabled. This can help prevent accidentally changing settings. 1 Select [5: Multi function lock]. camera controls to lock. 2 Select zz Press <0> to add a checkmark [X]. zz Select [OK]. gg Setting the switch to locks the selected [X] camera controls. oo In Basic Zone modes, only [Touch control] can be set.
Registering Custom Shooting Modes N You can register current camera settings, such as shooting, menu, and Custom Function settings, as Custom shooting modes assigned to to modes. [5: Custom shooting mode 1 Select (C1-C3)]. 2 Select [Register settings]. the desired items. 3 Register zz Select the Custom shooting mode to register, then select [OK] on the registration screen. gg The current camera settings are registered to Custom shooting mode C*.
Registering Custom Shooting Modes oo You can also change shooting and menu settings in Custom shooting modes.
Reverting the Camera to the Default Settings The camera’s settings for shooting functions and menu functions can be reverted to their defaults. [5: Clear all camera 1 Select settings]. 2 Select [OK]. oo For details on clearing all Custom Function and customized control settings, see =546.
Setting Copyright Information N When you set the copyright information, it will be recorded to the image as Exif information. 1 Select [5: Copyright information]. 2 Select an item. text. 3 Enter zz Use the cross keys or <5> dial to select a character, then press <0> to enter it. zz By selecting [ ], you can change the input mode. zz To delete single characters, select [ ] or press the button. the setting. 4 Exit zz Press the button, then press [OK].
Setting Copyright Information Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered. Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information. oo If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.].
Checking Other Information zzDownloading instruction manuals To download instruction manuals, select [5: Manual/software URL] and scan the displayed QR code with a smartphone. Note that scanning QR codes requires an app. zzDisplaying certification logosM Select [5: Certification Logo Display] to display some of the logos of the camera’s certifications. Other certification logos can be found in this Instruction Manual, on the camera body, and on the camera’s package.
Wi-Fi (Wireless Communication) Functions This chapter describes how to send images via Wi-Fi® from the camera to a variety of compatible devices, and how to use Web services.
What You Can Do via Wi-Fi (Wireless Communication) Functions (CANON iMAGE GATEWAY) (4) Send images to a Web service (3) Print images using a Wi-Fi printer (1) Communicate with a smartphone (2) Use with EOS software or other dedicated software Important Note that Canon cannot be held liable for any loss or damage from erroneous wireless communication settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
What You Can Do via Wi-Fi (Wireless Communication) Functions (1) q Communicate with a smartphone (=419) Control the camera remotely and browse images on the camera over a Wi-Fi connection by using the dedicated Camera Connect app on smartphones or tablets (collectively referred to as “smartphones” in this manual). (2) D Use with EOS software or other dedicated software (=453) Connect the camera to a computer via Wi-Fi and operate the camera remotely using EOS Utility (EOS software).
What You Can Do via Wi-Fi (Wireless Communication) Functions Bluetooth® Features By pairing the camera with a smartphone compatible with Bluetooth low energy technology (hereafter, “Bluetooth”), you can: zz Control the camera remotely from a smartphone (=433) zz Establish a Wi-Fi connection from either the smartphone or the camera, by itself (=428, =441) zz Establish a Wi-Fi connection with the camera even when it is off (=430) zz Geotag images with GPS information acquired by the smartphone (=403) This ca
Connecting to a Smartphone via Wi-Fi This section describes how to directly connect the camera to a smartphone via Wi-Fi. Connecting to a smartphone via Wi-Fi enables you to perform the following: zz View images stored in the camera on a smartphone or save viewed images to a smartphone. zz Operate the camera to take a picture or change camera settings using a smartphone. zz Send images to a smartphone from the camera.
Connecting to a Smartphone via Wi-Fi Installing Camera Connect on a Smartphone To connect the camera to a smartphone, a smartphone on which Android or iOS is installed is necessary. In addition, the dedicated app Camera Connect (free of charge) must be installed on the smartphone. zz Use the latest version of the smartphone OS. zz Camera Connect can be installed from Google Play or App Store.
Connecting to a Smartphone via Wi-Fi Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Make sure Camera Connect is installed on the smartphone, and that Bluetooth and Wi-Fi are on. Steps on the Camera (1) [5: Wireless communication 1 Select settings]. 2 Select [Bluetooth function]. 3 Select [Bluetooth function]. 4 Select [Smartphone].
Connecting to a Smartphone via Wi-Fi 5 Register [Nickname]. zz When using the displayed nickname, press the button. zz You can change the nickname (=497). 6 Select [OK]. 7 Select [Pairing].
Connecting to a Smartphone via Wi-Fi an item. 8 Select zz If Camera Connect is already installed, select [Do not display]. zz If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store and install Camera Connect. gg Pairing now begins.
Connecting to a Smartphone via Wi-Fi Steps on the Smartphone (1) 9 Start Camera Connect. the camera to pair with. 10Select gg If you are using an Android smartphone, go to step 12. 11 Tap on [Pair] (iOS only).
Connecting to a Smartphone via Wi-Fi Steps on the Camera (2) 12 Select [OK]. <0>. 13 Press zz Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. gg A Bluetooth icon appears on the main Camera Connect screen. oo Pairing or Bluetooth connection is not possible if the camera is connected to a computer or another device with an interface cable. oo The camera cannot be connected to two or more devices at the same time via Bluetooth.
Connecting to a Smartphone via Wi-Fi Steps on the Smartphone (2) a Camera Connect function. 14 Select zz In iOS, select [Join] when a message is displayed to confirm camera connection. zz For the Camera Connect functions, see =437. gg When a Wi-Fi connection is established, the screen for the selected function will appear. gg [qWi-Fi on] is displayed on the camera. gg The Bluetooth and Wi-Fi icons are lit on the main Camera Connect screen.
Connecting to a Smartphone via Wi-Fi zz For how to terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection” (=449). zz Terminating the Wi-Fi connection will switch the camera to the Bluetooth connection. [qWi-Fi on] Screen Disconnect,exit zz Terminates the Wi-Fi connection. Confirm set. zz You can check the settings. Error details zz When a Wi-Fi connection error occurs, you can check the details of the error.
Connecting to a Smartphone via Wi-Fi Connecting to a Bluetooth-connected Smartphone via Wi-Fi 1 Start Camera Connect. a Camera Connect function. 2 Select zz Select the Camera Connect function you want to use. zz In iOS, select [Join] when a message is displayed to confirm camera connection. When a Wi-Fi connection is established, the screen for the selected function will appear. zz For the Camera Connect functions, see =437.
Connecting to a Smartphone via Wi-Fi [Bluetooth function] Screen On the [Bluetooth function] screen, you can change or check the Bluetooth function settings. Bluetooth function zz Select the device to pair with the camera. zz If you will not use the Bluetooth function, select [Disable]. Pairing zz Pair the camera with the device selected in [Bluetooth function]. Check/clear connection info zz You can check the name and communication status of the paired device.
Connecting to a Smartphone via Wi-Fi Stay conn. if off zz Selecting [Enable] lets you view images on the camera and control it in other ways by connecting via Wi-Fi even if the camera is off. Establishing a Wi-Fi Connection When the Camera Is Off Once the devices are paired, you can use a smartphone to connect via WiFi and transfer images from the camera even when it is off. Configure [Stay conn. if off]. [Bluetooth function].
Connecting to a Smartphone via Wi-Fi Establishing a Wi-Fi Connection Camera Connect. 1 Start zz Start Camera Connect on a smartphone paired with the camera via Bluetooth. [Images on camera]. 2 Select zz In the Camera Connect menu, tap on [Images on camera]. zz In iOS, select [Join] when a message is displayed to confirm camera connection. Images on the camera are listed when the Wi-Fi connection is established.
Connecting to a Smartphone via Wi-Fi Removing a Paired Device’s Registration To pair the camera with a different smartphone, clear the paired device’s registration on the [Bluetooth function] screen (=429). Steps on the Camera [Check/clear connection 1 Select info]. 2 Press the button. the connection information. 3 Clear zz Select [OK]. Steps on the Smartphone the camera registration.
Connecting to a Smartphone via Wi-Fi Connecting to a Smartphone via Wi-Fi from the [Wi-Fi function] Menu Steps on the Camera (1) [5: Wireless communication 1 Select settings]. [Wi-Fi function]. 2 Select zz If the [Nickname] screen is displayed, register a nickname (=422). [q] (Connect to 3 Select smartphone). zz If the history (=493) is displayed, switch the screen with the keys. [Register a device for 4 Select connection].
Connecting to a Smartphone via Wi-Fi an item. 5 Select zz If Camera Connect is already installed, select [Do not display]. zz If Camera Connect is not installed, select [Android] or [iOS] on the screen on the left, scan the displayed QR code with the smartphone, then access Google Play or App Store and install Camera Connect. (1) the SSID (network name) 6 Check and password. zz Check the SSID (1) and password (2) displayed on the camera screen.
Connecting to a Smartphone via Wi-Fi Steps on the Smartphone Smartphone’s screen (sample) the smartphone to 7 Operate establish a Wi-Fi connection. zz Activate the smartphone’s Wi-Fi function, then select the SSID (network name) checked in step 6. zz For the password, enter the password checked in step 6. Camera Connect. 8 Start zz When the [Waiting to connect] screen is displayed on the camera, start Camera Connect on the smartphone. the camera to connect to via 9 Select Wi-Fi.
Connecting to a Smartphone via Wi-Fi gg The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. zz Operate the camera using Camera Connect. See =437. zz For how to terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection” (=449). zz To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (=493). [qWi-Fi on] Screen Disconnect,exit zz Terminates the Wi-Fi connection. Confirm set. zz You can check the settings.
Connecting to a Smartphone via Wi-Fi Operating the Camera Using a Smartphone The main functions of Camera Connect are described below. Images on camera zz Images stored in the camera can be viewed. zz Images stored in the camera can be saved on a smartphone. zz Operations such as deletion can be performed on images stored in the camera. Remote live view shooting zz The camera’s Live View image can be viewed on a smartphone. zz You can shoot with remote operation.
Connecting to a Smartphone via Wi-Fi oo If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • Any movie recording in progress in movie recording mode will continue. • Any movie recording in progress in still photo shooting mode will end. oo You cannot use the camera to shoot after using Camera Connect to switch from still photo shooting mode to movie recording mode.
Connecting to a Smartphone via Wi-Fi Sending Images to a Smartphone Automatically as You Shoot Your shots can be sent automatically. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. [5: Wireless communication 1 Select settings]. 2 Select [Wi-Fi settings]. [Send to smartphone after 3 Select shot]. 4 Set [Auto send] to [Enable].
Connecting to a Smartphone via Wi-Fi [Size to send]. 5 Set zz Select the image size, then press <0>. 6 Take the picture.
Connecting to a Smartphone via Wi-Fi Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. 1 Play back the image. 2 Press the button. [q]. 3 Select gg If you perform this step while connected via Bluetooth, a message is displayed, and the connection switches to a Wi-Fi connection. sending options and send 4 Select the images.
Connecting to a Smartphone via Wi-Fi (1) Sending Images Individually an image to send. 1 Select zz Press the keys or turn the <5> dial to select an image to send, then press <0>. zz You can press the button and turn the <6> dial counterclockwise to select the image using the index display. [Send img shown]. 2 Select zz In [Size to send], you can select the image sending size. zz When sending movies, you can select the image quality of movies to send in [Quality to send].
Connecting to a Smartphone via Wi-Fi (2) Sending Multiple Selected Images 1 Press <0>. 2 Select [Send selected]. images to send. 3 Select zz Press the keys or turn the <5> dial to select an image to send, then press <0>. zz You can press the button and turn the <6> dial counterclockwise to switch to the three-image display to select the images. To return to the single image display, also press the button and operate the <6> dial.
Connecting to a Smartphone via Wi-Fi image selection. 4 Exit zz Select [OK]. [Size to send]. 5 Select zz On the displayed screen, select an image size. zz When sending movies, select the image quality in [Quality to send]. 6 Select [Send]. (3) Sending a Specified Range of Images 1 Press <0>. 2 Select [Send range].
Connecting to a Smartphone via Wi-Fi the range of images. 3 Specify zz Select the first image (start point). zz Select the last image (end point). zz To cancel the selection, repeat this step. zz You can press the button and turn the <6> dial to change the number of images shown in the index display. the range. 4 Confirm zz Press the button. [Size to send]. 5 Select zz On the displayed screen, select an image size. zz When sending movies, select the image quality in [Quality to send].
Connecting to a Smartphone via Wi-Fi (4) Sending All Images on the Card 1 Press <0>. 2 Select [Send all card]. [Size to send]. 3 Select zz On the displayed screen, select an image size. zz When sending movies, select the image quality in [Quality to send]. 4 Select [Send].
Connecting to a Smartphone via Wi-Fi (5) Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Filtering Images for Playback” (=345). 1 Press <0>. 2 Select [Send all found]. [Size to send]. 3 Select zz On the displayed screen, select an image size. zz When sending movies, select the image quality in [Quality to send].
Connecting to a Smartphone via Wi-Fi 4 Select [Send]. Ending Image Transfer Sending Images from the Camera When Paired via Bluetooth (Android) zz Press the button on the image transfer screen. zz Select [OK] on the screen on the left to end image transfer and the Wi-Fi connection. Sending Images from the Camera over a Wi-Fi Connection zz Press the button on the image transfer screen. zz To terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection” (=449).
Connecting to a Smartphone via Wi-Fi oo During the image transfer operation, a picture cannot be taken even if the camera’s shutter button is pressed. oo The camera cannot be connected to multiple smartphones via Wi-Fi when it is connected to another device via Wi-Fi. oo You can cancel the image transfer by selecting [Cancel] during the transfer. oo You can select up to 999 files at a time. oo With a Wi-Fi connection established, disabling the smartphone’s power saving function is recommended.
Connecting to a Smartphone via Wi-Fi Specifying Viewable Images You can specify images viewable on a smartphone by operating the camera. Images can be specified after the Wi-Fi connection is terminated. [Wi-Fi function]. 1 Select zz Select [Wi-Fi function] on the [Wireless communication settings] screen. [q]. 2 Select zz If the history (=493) is displayed, switch the screen with the keys. 3 Select [Edit device information]. a smartphone.
Connecting to a Smartphone via Wi-Fi 5 Select [Viewable imgs]. an item. 6 Select zz Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shootingdate basis. Images shot up to nine days ago can be specified. zz When [Images shot in past days] is selected, images shot up to the specified number of days before the current date become viewable.
Connecting to a Smartphone via Wi-Fi [Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. zz Once you select the type of rating, the viewable images are set. [File number range] (Select range) (1) 452 (2) Select the first and last images from images arranged by the file number to specify the viewable images. 1. Press <0> to display the image selection screen. Select an image using the keys or <5> dial.
Connecting to a Computer via Wi-Fi This section describes how to connect the camera to a computer via WiFi and perform camera operations using EOS software or other dedicated software. Install the latest version of software on the computer before setting up a Wi-Fi connection. For computer operating instructions, refer to the computer user manual. Operating the Camera Using EOS Utility Using EOS Utility (EOS software), you can perform a variety of camera operations.
Connecting to a Computer via Wi-Fi [Register a device for 4 Select connection]. (1) the SSID (network name) 5 Check and password. zz Check the SSID (1) and password (2) displayed on the camera screen. zz In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required. For details, see =516. (2) Steps on the Computer (1) Computer’s screen (sample) the SSID, then enter the 6 Select password.
Connecting to a Computer via Wi-Fi Steps on the Camera (2) [OK]. 7 Select gg The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected. Steps on the Computer (2) 8 Start EOS Utility. EOS Utility, click [Pairing over 9 InWi-Fi/LAN]. zz If a firewall-related message is displayed, select [Yes]. [Connect]. 10Click zz Select the camera to connect to, then click [Connect].
Connecting to a Computer via Wi-Fi Steps on the Camera (2) a Wi-Fi connection. 11 Establish zz Select [OK]. [DWi-Fi on] Screen Disconnect,exit zz Terminates the Wi-Fi connection. Confirm set. zz You can check the settings. Error details zz When a Wi-Fi connection error occurs, you can check the details of the error. The Wi-Fi connection to a computer is now complete. zz Operate the camera using EOS Utility on the computer. zz To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (=493).
Connecting to a Computer via Wi-Fi oo If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • Any movie recording in progress in movie recording mode will continue. • Any movie recording in progress in still photo shooting mode will end. oo Operations using the camera are not possible after you use EOS Utility to switch from still photo shooting mode to movie recording mode.
Connecting to a Computer via Wi-Fi Sending Images to a Computer Automatically With the dedicated software Image Transfer Utility 2, you can send images on the camera to a computer automatically. Steps on the Computer (1) the computer and access 1 Connect point and start Image Transfer Utility 2. zz In Image Transfer Utility 2, access the pairing settings screen. zz The screen to set up pairing is shown when you follow the instructions displayed the first time Image Transfer Utility 2 starts up.
Connecting to a Computer via Wi-Fi 4 Select [OK]. to an access point via 5 Connect Wi-Fi. zz Establish a Wi-Fi connection between the camera and the access point connected to the computer. For connection instructions, see “WiFi Connection via Access Points” (=488). the computer to pair the 6 Select camera with. Steps on the Computer (2) the camera and computer. 7 Pair zz Select the camera, then click [Pairing].
Connecting to a Computer via Wi-Fi Sending Images on the Camera to a Computer Automatically the [Wi-Fi settings] screen, 1 On select [Auto send images to computer]. 2 Select [Image sending options]. what to send. 3 Select zz If you select [Selected imgs] in [Range to send], specify the images to send on the [Select images to send] screen. the computer and access 4 Connect point via Wi-Fi and start Image Transfer Utility 2.
Connecting to a Printer via Wi-Fi This section describes how to print images by directly connecting the camera to a printer via Wi-Fi. For printer operating instructions, refer to the printer user manual. Establishing a Wi-Fi Connection [5: Wireless communication 1 Select settings]. [Wi-Fi function]. 2 Select zz If the [Nickname] screen is displayed, register a nickname (=422). [l] (Print from Wi-Fi 3 Select printer). zz If the history (=493) is displayed, switch the screen with the keys.
Connecting to a Printer via Wi-Fi (1) the SSID (network name) 5 Check and password. zz Check the SSID (1) and password (2) displayed on the camera screen. zz In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required. For details, see =516. (2) up the printer. 6 Set zz On the Wi-Fi settings menu of the printer to be used, select the SSID you have checked. zz For the password, enter the password checked in step 5. the printer.
Connecting to a Printer via Wi-Fi oo Wi-Fi connection is possible with Wi-Fi printers supporting PictBridge (Wireless LAN). oo To establish a Wi-Fi connection via an access point, see “Wi-Fi Connection via Access Points” (=488).
Connecting to a Printer via Wi-Fi Printing Images Printing Images Individually the image to be printed. 1 Select zz Press the keys or turn the <5> dial to select an image to print, then press <0>. zz You can press the button and turn the <6> dial counterclockwise to select the image using the index display. 2 Select [Print image]. the image. 3 Print zz For the print setting procedures, see =467. zz Select [Print], then [OK] to start printing.
Connecting to a Printer via Wi-Fi Printing by Specifying the Options 1 Press <0>. 2 Select [Print order]. the printing options. 3 Set zz For the setting procedures, refer to “Digital Print Order Format (DPOF)” (=318). zz If the print order is complete before establishing a Wi-Fi connection, go to step 4. [Print]. 4 Select zz [Print] can be selected only when an image is selected and the printer is ready to print. 5 Set the [Paper settings] (=467).
Connecting to a Printer via Wi-Fi the image. 6 Print zz When [OK] is selected, printing starts. oo Shooting is not possible while connected to a printer via Wi-Fi. oo Movies cannot be printed. oo Before printing, be sure to set the paper size. oo Certain printers may not be able to imprint the file number. oo If [Bordered] is set, certain printers may imprint the date on the border. oo Depending on the printer, the date may appear faint if it is imprinted on a bright background or on the border.
Connecting to a Printer via Wi-Fi Print Settings The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. Print setting screen (1) (2) (3) (4) (5) (6) (8) (1) (2) (3) (4) (5) (6) (7) (8) (7) Sets date or file number printing (=469). Sets the printing effects (=469). Sets the number of copies to print (=470). Sets the print area (=471). Sets the paper size, type, and layout (=468).
Connecting to a Printer via Wi-Fi [Q] Setting the Paper Size zz Select the size of the paper in the printer. [Y] Setting the Paper Type zz Select the type of the paper in the printer. [U] Setting the Page Layout zz Select the page layout. Borderless Prints with no borders. If your printer cannot print borderless prints, the print will have borders. Bordered Prints with white borders along the edges. xx-up Option to print 2, 4, 8, 9, 16, 20 or 35 images on one sheet.
Connecting to a Printer via Wi-Fi Setting the Date/File Number Imprinting zz Select [I]. zz Select what to print. Setting the Printing Effects (Image Optimization) Contents displayed on the screen vary depending on the printer. zz Select [E]. zz Select printing effects. Option Printing Effect [E] Default Printing effects differ depending on the printer. For details, refer to the printer’s instruction manual. [E] On Prints in the printer’s standard colors.
Connecting to a Printer via Wi-Fi Setting the Number of Copies zz Select [R]. zz Select the number of copies to print. oo The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer. Refer to the printer’s instruction manual to find out what the [Default] settings are.
Connecting to a Printer via Wi-Fi Cropping the Image Set cropping immediately before printing. Changing other print settings after you crop images may require you to crop the images again. 1 On the print setting screen, select [Cropping]. the cropping frame size, position, and aspect ratio. 2 Set zz The image area within the cropping frame will be printed. The shape of the frame (aspect ratio) can be changed with [Paper settings].
Connecting to a Printer via Wi-Fi oo Depending on the printer, the cropped image area may not be printed as you specified. oo The smaller the cropping frame, the lower the resolution at which images are printed. Handling Printer Errors oo If printing does not resume after you resolve a printer error (no ink, no paper, etc.) and select [Continue], operate the buttons on the printer. For details on resuming printing, refer to the printer’s instruction manual.
Sending Images to a Web Service This section describes how to use Web services to send images. Registering Web Services Use a smartphone or computer to add your Web services to the camera. zz A smartphone or computer with a browser and Internet connection is required to complete camera settings for CANON iMAGE GATEWAY and other Web services.
Sending Images to a Web Service Registering CANON iMAGE GATEWAY Link the camera and CANON iMAGE GATEWAY by adding CANON iMAGE GATEWAY as a destination Web service on the camera. You will need to enter an email address used on your computer or smartphone. Steps on the Camera (1) [5: Wireless communication 1 Select settings]. [Wi-Fi function]. 2 Select zz If the [Nickname] screen is displayed, register a nickname (=422). 3 Select [R]. 4 Select [I Agree].
Sending Images to a Web Service a Wi-Fi Connection 5 Establishing zz Connect to an access point via Wi-Fi. Go to step 7 on =490. your email address. 6 Enter zz Enter your email address, then select [OK]. a four-digit number. 7 Enter zz Enter a four-digit number of your choice, then select [OK]. [OK]. 8 Select gg The [R] icon changes to [ ].
Sending Images to a Web Service Steps on the Computer or Smartphone up camera web link. 9 Set zz Access the page in the notification message. zz Follow the instructions to complete the settings on the camera web link settings page. Steps on the Camera (2) CANON iMAGE GATEWAY as a 10Add destination. zz Select [ ]. gg CANON iMAGE GATEWAY is now added.
Sending Images to a Web Service Registering Other Web Services Steps on the Computer or Smartphone the Web service you 1 Configure want to use. zz Visit the CANON iMAGE GATEWAY website and access the camera web link settings page. zz Follow the on-screen instructions to complete settings for Web services you want to use. Steps on the Camera the Web service you 2 Add configured as a destination. zz On the [Wi-Fi function] screen, select [ ].
Sending Images to a Web Service Establishing a Wi-Fi Connection [Wi-Fi function]. 1 Select zz Select [Wi-Fi function] on the [Wireless communication settings] screen. a Web service. 2 Select zz If the history (=493) is displayed, switch the screen with the keys. zz A screen to select a destination may be displayed, depending on the type and settings of the Web service (=492).
Sending Images to a Web Service Sending Images to a Web Service You can share images with your family and friends by sending images from the camera to a Web service registered on the camera or by sending Web links of the online albums. Sending Images Individually an image to send. 1 Select zz Press the keys or turn the <5> dial to select an image to send, then press <0>. zz You can press the button and turn the <6> dial counterclockwise to select the image using the index display.
Sending Images to a Web Service Sending Multiple Selected Images 1 Press <0>. 2 Select [Send selected]. images to send. 3 Select zz Press the keys or turn the <5> dial to select an image to send, then press <0>. zz You can press the button and turn the <6> dial counterclockwise to switch to the three-image display to select the images. To return to the single image display, also press the button and operate the <6> dial. zz After selecting the images to send, press the button.
Sending Images to a Web Service [Size to send]. 4 Select zz When YouTube is selected as the destination, [Size to send] is not displayed. zz On the displayed screen, select an image size. [Send]. 5 Select zz On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys.
Sending Images to a Web Service Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. 1 Press <0>. 2 Select [Send range]. the range of images. 3 Specify zz Select the first image (start point). zz Select the last image (end point). gg Images will be selected and [X] will appear. zz To cancel the selection, repeat this step. zz You can press the button and turn the <6> dial to change the number of images shown in the index display. the range.
Sending Images to a Web Service [Size to send]. 5 Select zz On the displayed screen, select an image size. [Send]. 6 Select zz On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys. Sending All Images on the Card 1 Press <0>. 2 Select [Send all card].
Sending Images to a Web Service [Size to send]. 3 Select zz On the displayed screen, select an image size. [Send]. 4 Select zz On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys.
Sending Images to a Web Service Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Filtering Images for Playback” (=345). 1 Press <0>. 2 Select [Send all found]. [Size to send]. 3 Select zz On the displayed screen, select an image size.
Sending Images to a Web Service [Send]. 4 Select zz On the screen after images are sent, select [OK] to end the Wi-Fi connection. zz When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. zz To scroll the screen, use the keys.
Sending Images to a Web Service oo With a Wi-Fi connection to a Web service established, a picture cannot be taken even if the camera’s shutter button is pressed. oo When sending an image to a Web service other than CANON iMAGE GATEWAY, a send error message may not be displayed even if the image has not been sent to the Web service successfully. Since such send errors can be checked on the CANON iMAGE GATEWAY site, check the error content, then try sending the image again.
Wi-Fi Connection via Access Points This section describes how to join a Wi-Fi network via an access point compatible with WPS (PCB mode). First, check the position of the WPS button and how long to press it. It may take approx. one minute to establish a Wi-Fi connection. [5: Wireless communication 1 Select settings]. [Wi-Fi function]. 2 Select zz If the [Nickname] screen is displayed, register a nickname (=422). an item.
Wi-Fi Connection via Access Points [Register a device for 4 Select connection]. zz When [q] (Connect to smartphone) is selected, the screen on the left is displayed. If Camera Connect is already installed, select [Do not display]. [Switch network]. 5 Select zz Displayed when [q], [D], or [l] is selected. 6 Select [Connect with WPS]. oo For [Camera access point mode] displayed in step 6, see =492.
Wi-Fi Connection via Access Points [WPS (PBC mode)]. 7 Select zz Select [OK]. to the access point via 8 Connect Wi-Fi. zz Press the access point’s WPS button. zz Select [OK]. [Auto setting]. 9 Select zz Select [OK] to access the setting screen for the Wi-Fi function. zz If an error occurs with [Auto setting], see =518.
Wi-Fi Connection via Access Points the settings for the Wi-Fi 10Specify function. [qConnect to smartphone] Go to step 7 on =435. [DRemote control (EOS Utility)] Go to step 8 or 9 on =455. [lPrint from Wi-Fi printer] Go to step 7 on =462. Registering CANON iMAGE GATEWAY Go to step 6 on =475.
Wi-Fi Connection via Access Points Send To Screen A screen to select a destination may be displayed depending on the Web service. To register destinations or to specify the settings, you must use a computer. For more information, refer to the EOS Utility Instruction Manual. zz The [Send to] screen may be displayed. zz Select the destination from the list of registered destinations. zz The procedures for setting up a connection and sending images are the same as those for other Web services.
Reconnecting via Wi-Fi Follow these steps to reconnect to devices or Web services with registered connection settings. [Wi-Fi function]. 1 Select zz Select [Wi-Fi function] on the [Wireless communication settings] screen. an item. 2 Select zz Select the item to connect to via Wi-Fi from the displayed history. If the item is not displayed, use the keys to switch screens. zz If [Connection history] is set to [Hide], the history will not be displayed (=516). the connected device.
Reconnecting via Wi-Fi [D] Computer zz On the computer, start the EOS software. zz If the computer’s connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a computer via Wi-Fi, “_ Canon0A” is displayed at the end of the SSID.
Reconnecting via Wi-Fi Registering Multiple Connection Settings You can register up to 20 connection settings for the Wi-Fi function. [Wi-Fi function]. 1 Select zz Select [Wi-Fi function] on the [Wireless communication settings] screen. an item. 2 Select zz When the screen on the left appears, use the keys to switch screens. zz Select the item to newly connect to via Wi-Fi from the screen on the left.
Changing or Deleting Connection Settings Change or delete connection settings saved on the camera. To change or delete the connection settings, terminate the Wi-Fi connection first. [Wi-Fi function]. 1 Select zz Select [Wi-Fi function] on the [Wireless communication settings] screen. an item. 2 Select zz When the screen on the left appears, use the keys to switch screens. zz From the screen on the left, select the item for which to change or delete the connection settings.
Changing or Deleting Connection Settings or change the connection 5 Check settings. zz Select an item, then change or delete the connection settings on the displayed screen. zzChange device nickname You can change the nickname using the virtual keyboard (=517). zzViewable imgs (=450) Displayed when [q] (Connect to smartphone) is selected. Settings will appear at the bottom of the screen. zzErase connection information You can delete connection settings saved on the camera.
Clearing Wireless Communication Settings to Default All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. 1 Select [Clear settings]. [OK]. 2 Select gg Wireless communication settings are cleared to default, and the [Wireless communication settings] screen will reappear.
View Info Screen On the [View info] screen, you can check error details and the camera’s MAC address. [Wi-Fi function]. 1 Select zz Select [Wi-Fi function] on the [Wireless communication settings] screen. the button. 2 Press gg The [View info] screen will appear. zz When an error has occurred, press <0> to display the error content.
Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. zz On the [View info] screen, press <0> (=499). zz Select [Error details] on the [Wi-Fi on] screen. Click the error code number’s page in the following chart to jump to the corresponding page.
Responding to Error Messages 11: Connection target not found zz In the case of [q], is Camera Connect running? gg Establish a connection using Camera Connect (=435). zz In the case of [l], is the power of the printer on? gg Turn on the printer. zz In the case of [D], is the EOS software running? gg Start the EOS software and reestablish the connection (=455).
Responding to Error Messages 21: No address assigned by DHCP server What to check on the camera zz On the camera, IP address is set to [Auto setting]. Is this the correct setting? gg If no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera (=518). What to check on the DHCP server zz Is the power of the DHCP server on? gg Turn on the DHCP server.
Responding to Error Messages 22: No response from DNS server What to check on the camera zz On the camera, does the DNS server’s IP address setting match the server’s actual address? gg Set the IP address to [Manual setting]. Then, on the camera, set the IP address that matches the address of the DNS server used (=514, =518). What to check on the DNS server zz Is the power of the DNS server on? gg Turn on the DNS server.
Responding to Error Messages 23: Device with same IP address exists on selected network What to check on the camera zz Do the camera and another device connected via Wi-Fi to the same network have the same IP address? gg Change the camera’s IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address.
Responding to Error Messages 61: Selected SSID wireless LAN network not found zz Are any obstacles blocking the line of sight between the camera and the antenna of the access point? gg Move the antenna of the access point to a position clearly visible from the point of view of the camera (=511). What to check on the camera zz Does the SSID set on the camera match that of the access point? gg Check the SSID at the access point, then set the same SSID on the camera.
Responding to Error Messages 63: Wireless LAN authentication failed zz Are the camera and the access point set to use the same authentication method? gg The camera supports the following authentication methods: [Open system], [Shared key], and [WPA/WPA2-PSK]. zz Are the camera and the access point set to use the same password for authentication? gg The setting is case-sensitive, so check upper- and lower-case characters. Make sure that the correct password for authentication is set on the camera.
Responding to Error Messages 65: Wireless LAN connection lost zz Are any obstacles blocking the line of sight between the camera and the antenna of the access point? gg Move the antenna of the access point to a position clearly visible from the point of view of the camera (=511). zz The Wi-Fi connection was lost for some reason, and the connection cannot be restored.
Responding to Error Messages 68: Cannot connect to wireless LAN terminal. Retry from the beginning. zz Did you hold down the access point’s WPS (Wi-Fi Protected Setup) button for the specified period of time? gg Hold down the WPS button for the period of time specified in the access point’s instruction manual. zz Are you trying to establish a connection near the access point? gg Try establishing the connection when both devices are within reach of each other.
Responding to Error Messages 125: Check the network settings zz Is the network connected? gg Check the connection status of the network. 126: Could not connect to server zz CANON iMAGE GATEWAY is under maintenance or load is concentrated temporarily. gg Try connecting to the Web service again later. 127: An error has occurred zz A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service. gg Try again to establish the Wi-Fi connection to the Web service.
Responding to Error Messages 151: Transmission canceled zz Automatic image transfer to the computer was somehow interrupted. gg To resume automatic image transfer, set the camera’s power switch to <2>, and then set it to <1>. 152: Card’s write protect switch is set to lock zz Is the card’s write protect switch set to the locked position? gg Slide the card’s write protect switch to the writing position.
Wireless Communication Function Notes If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions. Distance Between the Camera and the Smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible. In this case, bring the camera and the smartphone closer together, then establish a WiFi connection.
Wireless Communication Function Notes Using the Wireless Remote Control BR-E1 zz When [Bluetooth function] is set to [Remote] to use the Wireless Remote Control BR-E1, the camera cannot be connected to a smartphone via Bluetooth.
Security If security settings have not been properly set, the following problems may occur. zzTransmission monitoring Third parties with malicious intent may monitor the Wi-Fi transmissions and attempt to acquire the data you are sending. zzUnauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Checking Network Settings zzWindows Open the Windows [Command Prompt], then type ipconfig/all and press the key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. zzMac OS In Mac OS X, open the [Terminal] application, enter ifconfig -a, and press the key. The IP address assigned to the computer is indicated in the [en0] item next to [inet], in the format “***.***.***.***”.
[Wireless communication settings] Screen On the [Wireless communication settings] screen, you can change the wireless communication function settings. Select [5: Wireless communication settings]. Wi-Fi settings zz See the next page.
[Wi-Fi settings] Screen Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. Password Set to [None] to allow a Wi-Fi connection to be established without a password (except when connecting to an access point via WiFi). Connection history You can set whether to [Show] or [Hide] the history of the Wi-Fi connected devices.
Virtual Keyboard Operation (1) (2) (3) (4) (5) (1) (2) (3) (4) (5) (6) (7) (8) Input area, for entering text Cursor keys, for moving in the input area Current no. of characters/no. available Keyboard Switch input modes (9) (6) (7) (8) (9) Space Delete a character in the input area Change the type of keyboard Finish the text entry zz Use the keys to move within 2 and 4–8. zz Press <0> to confirm input or when switching input modes.
Setting the IP Address Manually Set up the IP address settings manually. The items displayed vary depending on the Wi-Fi function. [Manual setting]. 1 Select zz Select [OK]. an item. 2 Select zz Select an item to access the screen for numerical input. zz To use a gateway, select [Enable], then select [Address]. the desired values. 3 Enter zz Turn the <6> dial to move the input position in the upper area and turn the <5> dial to select the number. Press <0> to enter the selected number.
Setting the IP Address Manually [OK]. 4 Select zz When you have completed setting the necessary items, select [OK]. zz If you are not sure what to enter, see “Checking Network Settings” (=514), or ask the network administrator or another person knowledgeable about the network.
Wi-Fi/Bluetooth Status Display Wireless communication status can be checked on the camera screen.
Wi-Fi/Bluetooth Status Display Bluetooth Function Indicator Bluetooth function Other than [Disable] [Disable] Connection status Screen Bluetooth connected Bluetooth not connected Bluetooth not connected Not displayed 521
Custom Functions / My Menu You can fine-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences. You can also add menu items and Custom Functions that you adjust frequently to My Menu tabs.
Tab Menus: Customization =526 =530 =536 =546 =546 524
Setting Custom Functions 1 (1) N Select [C.Fn I: Exposure], [C.Fn II: Autofocus], or [C.Fn III: Operation/ Others]. a Custom Function number. 2 Select zz Use the keys to select the Custom Function number (1) to set up. the setting as desired. 3 Change zz Use the keys to select a setting (number). zz To set up another Custom Function, repeat steps 2–3. zz At the bottom of the screen, the current Custom Function settings are indicated below the respective function numbers.
Custom Function Settings N You can customize camera features on the [8] tab to suit your shooting preferences. C.Fn I: Exposure C.Fn I-1: Exposure level increments Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc. zz 0: 1/3-stop zz 1: 1/2-stop oo When [1/2-stop] is set, the display will be as shown below. C.Fn I-2: ISO speed setting increments You can change the manual ISO speed setting increments to a whole-stop.
Custom Function Settings C.Fn I-3: Bracketing auto cancel You can specify to cancel AEB and white balance bracketing when the power switch is set to <2>. zz 0: Enable zz 1: Disable C.Fn I-4: Bracketing sequence The AEB shooting sequence and white balance bracketing sequence can be changed.
Custom Function Settings C.Fn I-5: Number of bracketed shots The number of shots taken with AEB and white balance bracketing can be changed. When [Bracketing sequence] is set to [0, –, +], the bracketed shots will be taken as shown in the table below.
Custom Function Settings C.Fn I-6: Safety shift If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually selected setting to obtain the standard exposure. When set to [Shutter speed/Aperture], this setting applies to and mode. When set to [ISO speed], this setting applies to , , and mode.
Custom Function Settings C.Fn II: Autofocus C.Fn II-1: Tracking sensitivity You can set the subject-tracking sensitivity, which affects responsiveness to interfering objects that move across AF points or subjects that stray from AF points during Servo AF. zz 0 Standard setting. Suitable for moving subjects in general. zz Locked on: –2 / Locked on: –1 The camera will try to continue focusing on the subject even if an obstacle cuts across the AF points or if the subject strays from the AF points.
Custom Function Settings C.Fn II-2: Acceleration/deceleration tracking Sets the Servo AF tracking sensitivity for subjects that change speed suddenly, as by suddenly moving or stopping. zz 0 Suited for subjects that move at a steady speed (minor changes in moving speed). zz –2 / –1 Suited for subjects that move at a steady speed (minor changes in moving speed). Effective when a setting of 0 makes focus unstable, due to slight subject movement or an obstruction in front of the subject.
Custom Function Settings C.Fn II-3: AF point auto switching This sets the switching sensitivity of the AF points as they track the subject moving dramatically up, down, left, or right. Takes effect when [z: AF method] is set to [u+Tracking], [Expand AF area: Z], [Expand AF area: Around], or [Zone AF]. zz 0 Standard setting for gradual AF point switching.
Custom Function Settings C.Fn II-4: Lens drive when AF impossible You can specify lens operation in cases when the camera cannot autofocus on a subject. zz 0: Continue focus search If focus cannot be achieved with autofocus, the lens is driven to search for the precise focus. zz 1: Stop focus search If autofocus starts and the focus is far off or if focus cannot be achieved, the lens drive will not be performed. This prevents the lens from becoming grossly out of focus due to the focus search drive.
Custom Function Settings C.Fn II-6: Orientation linked AF point You can assign AF points or Zone AF frames to different positions based on whether you are shooting vertically or horizontally. zz 0: Same for both vertic./horiz. AF points or Zone AF frames in the same position are used for both vertical and horizontal shooting. zz 1: Separate AF pts: pt only Separate AF point or Zone AF frame positions can be assigned for each camera orientation (1. Horizontal, 2. Vertical with the camera grip above, 3.
Custom Function Settings C.Fn II-7: Initial Servo AF pt for c You can set the initial AF point for Servo AF when the AF method is set to [u+Tracking]. zz 0: Automatic The initial AF point of Servo AF for [u+Tracking] is set automatically to suit the shooting conditions. zz 1: Initial AF pt set for c Servo AF starts from the manually set AF point when AF operation is set to [Servo AF] and the AF method is set to [u+Tracking].
Custom Function Settings C.Fn III: Operation/Others C.Fn III-1: Dial direction during Tv/Av Dial turning direction when setting the shutter speed and aperture can be reversed. In the shooting mode, the turning direction of the <6> and <5> dials will be reversed. In other shooting modes, the turning direction of only the <6> dial will be reversed. The direction of the <5> dial in mode matches the direction to set exposure compensation in , , and modes.
Custom Function Settings C.Fn III-5: Customize buttons You can assign frequently used functions to buttons, such as or . Different functions, for use when shooting still photos or movies, can be assigned to the same button. 1 Select a part of the bar. a function to assign. 2 Select zz Press <0> to set it.
Custom Function Settings Functions Available for Buttons Function L Metering and AF start k k k AF stop k k AF point selection k k AF Direct AF point selection Set AF point to center k k One-Shot AFzServo AF*1 k k Touch & drag AF k k Eye Detection AF*1 k k AE lock k k AE lock (hold) k k k k Flash function settings*1 k k FE lock*1 k k Movies k k Metering start Exposure AE lock (while button pressed) k AE Lock/FE Lock*1 Exposure compensation (hold button, turn Se
Custom Function Settings k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k 539
Custom Function Settings Function L Press buttons directly Menu Dial function settings k k Depth-of-field preview*1 k k Reset selected item in Fv mode*1 k k /ISO in Fv mode*1 k k Quick Control screen k k Magnify/Reduce k k Menu display k k Image quality*1 k k Picture Style k k Select folder k k Create folder k k Maximize screen brightness (temporary) k k Display off k k Switch between viewfinder/screen k k Eco mode k k Wi-Fi function k k No function (disab
Custom Function Settings k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k > stands for “AF stop button” provided on s
Custom Function Settings C.Fn III-6: Customize dials You can assign frequently used functions to dials, such as <5>, <6>, or . 1 Select a part of the bar. a function to assign. 2 Select zz Press <0> to set it.
Custom Function Settings Functions Available for Dials Function 6 5 Shutter speed setting in M mode k k Aperture setting in M mode k k T Change aperture (hold metering button) k Change shutter speed (hold metering button) k Set ISO speed (hold metering button) k Exposure compensation (hold metering button) k Change aperture value k Change shutter speed k Set ISO Speed k Exposure compensation No function (disabled) k k k k oo : Control ring on RF lenses and mount adapters 543
Custom Function Settings C.Fn III-7: Release shutter without lens You can specify whether shooting still photos or movies is possible without a lens attached to the camera. zz 0: Disable zz 1: Enable C.Fn III-8: Retract lens on power off You can set whether to retract gear-type STM lenses (such as EF40mm f/2.8 STM) automatically when the camera’s power switch is set to <2>. zz 0: Enable zz 1: Disable oo With auto power off, the lens will not retract regardless of the setting.
Custom Function Settings C.Fn III-9: Audio compression Sets audio compression for movie recording. [1: Disable] allows higher audio quality than when audio is compressed, but file sizes are larger. zz 0: Enable zz 1: Disable oo Editing movie files recorded with [1: Disable] and then saving them with compression will also compress the audio. oo Audio is compressed even if [1: Disable] is selected when [Movie rec. size] is set to L6V (NTSC) or L5V (PAL).
Clearing Custom Function Settings zzClearing all Custom Function settings By selecting [8: Clear all Custom Func. (C.Fn)], you can clear all Custom Function settings other than [Customize buttons] and [Customize dials] settings. zzClearing [Customize buttons] and [Customize dials] settings By selecting [8: Clear customized settings], you can clear [Customize buttons] and [Customize dials] settings.
Tab Menus: My Menu =548 =551 =551 =552 547
Registering My Menu N Under My Menu tab, you can register menu items and Custom Functions whose settings you change frequently. Creating and Adding My Menu Tab 1 Select [Add My Menu tab]. [OK]. 2 Select zz You can create up to five My Menu tabs by repeating steps 1 and 2. Registering Menu Items under the My Menu Tab(s) 1 Select [MY MENU*: Configure].
Registering My Menu 2 Select [Select items to register]. the desired items. 3 Register zz Select the item to be set, then press <0>. zz Select [OK] on the confirmation dialog. zz You can register up to six items. zz To return to the screen in step 2, press the button. My Menu Tab Settings You can sort and delete items under the menu tab, and rename or delete the menu tab. zzSort registered items You can change the order of the registered items in My Menu.
Registering My Menu zzDelete tab You can delete the current My Menu tab. Select [Delete tab] to delete the [MY MENU*] tab. zzRename tab You can rename the My Menu tab from [MY MENU*]. 1 Select [Rename tab]. text. 2 Enter zz Select [ ] or press the button to delete any unneeded characters. zz Use the cross keys or <5> dial to select a character, then press <0>. zz By selecting [ ], you can change the input mode. input. 3 Confirm zz Press the button, then press [OK].
Registering My Menu Deleting all My Menu tabs / Deleting all items You can delete all the created My Menu tabs or My Menu items registered under them. zzDelete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [9] tab will revert to its default. zzDelete all items You can delete all the items registered under the [MY MENU1] to [MY MENU5] tabs. The tab(s) will remain.
Registering My Menu Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the button. zzNormal display Displays the last displayed menu screen. zzDisplay from My Menu tab Displays with the [9] tab selected. zzDisplay only My Menu tab Only the [9] tab is displayed. (The [z], [3], [5], and [8] tabs will not be displayed.
Reference This chapter provides reference information on camera features.
Software Overview Downloading and Installing the Software When using EOS software or other dedicated software, use the latest version available. To download it, you will need to enter the serial number on the bottom of the camera. oo Do not connect the camera to a computer before you install the software. The software will not be installed correctly. oo You cannot install the EOS software to a computer without an Internet connection. oo Previous versions cannot display images from this camera correctly.
Software Overview (1) Double-click the dmg file. gg A drive icon and installer file will appear on the desktop. If the installer file does not appear, double-click the drive icon to display it. (2) Double-click the installer file. gg The installer starts. 2 Follow the on-screen instructions to install the software. Downloading the Software Instruction Manuals Software Instruction Manuals (PDF files) can be downloaded from the Canon website to your computer.
Importing Images to a Computer You can use EOS software to import images from the camera to a computer. There are two ways to do this. Importing by Connecting the Camera to the Computer 1 Install the software (=554). the camera to the 2 Connect computer with an interface cable (sold separately). zz Insert the plug into the camera’s digital terminal. zz Insert the other end of the cable into the computer’s USB terminal. EOS Utility to import the 3 Use images.
Importing Images to a Computer Importing Images with a Card Reader You can use a card reader to import images to a computer. 1 Install the software (=554). 2 Insert the card into the card reader. Digital Photo Professional to 3 Use import the images. zz Refer to the Digital Photo Professional Instruction Manual. oo When importing images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Charging a Battery in the Camera Using USB Power Adapter PD-E1 (sold separately), you can charge Battery Pack LP-E17 without removing it from the camera. Charging stops if you operate the camera. the USB power adapter. 1 Connect zz With the camera’s power switch set to <2>, insert the USB power adapter plug fully into the digital terminal. the power cord. 2 Connect zz Connect the power cord to the USB power adapter and plug the other end into a power outlet.
Charging a Battery in the Camera oo If the access lamp does not light up, try unplugging the USB power adapter and plugging it in again. oo The charging time required and the amount charged vary depending on ambient temperature and remaining capacity. oo For safety reasons, recharging in low temperatures (5–10°C / 41–50°F) will take longer. oo Batteries are not charged when the camera is connected via Wi-Fi or when the card slot/battery compartment cover is open.
Using an Extension Grip Extension Grip EG-E1 (sold separately) is a dedicated accessory that makes EOS RP cameras even easier to hold. The battery and card can be inserted or removed while the extension grip is attached to the camera. the card slot/battery 1 Remove compartment cover. zz Turn the camera off and remove the cover. Be careful not to lose the cover after removal. the extension grip. 2 Attach zz Attach as shown at left and turn the attach/detach dial to lock in place.
Using an Extension Grip the extension grip cover. 3 Open zz For instructions on inserting or removing the battery and card, see “Inserting/ Removing the Battery and Card” (=42). oo When reattaching the card slot/battery compartment cover to the camera, attach it opened to at least 90°.
Troubleshooting If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems Batteries cannot be charged with the charger. zz Do not use any battery packs other than a genuine Canon Battery Pack LP-E17. The charger’s lamp blinks at high speed.
Troubleshooting Batteries cannot be charged with the USB power adapter (sold separately). zz Batteries are not charged while the camera’s power switch is set to <1>. zz Operating the camera will stop charging in progress. The access lamp blinks during charging with the USB power adapter. zz In case of charging problems, the access lamp blinks in green and a protective circuit stops charging. In this case, unplug the power cord, reattach the battery, and wait a few minutes before plugging it in again.
Troubleshooting [Does this battery/do these batteries display the Canon logo?] is displayed. zz Do not use any battery packs other than a genuine Canon Battery Pack LP-E17. zz Remove and install the battery again (=42). zz If the electrical contacts are dirty, use a soft cloth to clean them. The battery becomes exhausted quickly. zz Use a fully charged battery (=40). zz The battery performance may have degraded. See [5: Battery info.] to check the battery’s recharge performance level (=381).
Troubleshooting Shooting-Related Problems The lens cannot be attached. zz To attach EF or EF-S lenses, you will need a mount adapter. The camera cannot be used with EF-M lenses. No images can be shot or recorded. zz Make sure the card is properly inserted (=42). zz Slide the card’s write-protect switch to the Write/Erase setting (=42). zz If the card is full, replace the card or delete unnecessary images to make space (=42, =314).
Troubleshooting The image is out of focus or blurred. zz Set the lens’s focus mode switch to (=48, =51). zz Press the shutter button gently to prevent camera shake (=54). zz With a lens equipped with an Image Stabilizer, set the IS switch to <1>. zz In low light, the shutter speed may become slow. Use a faster shutter speed (=98), set a higher ISO speed (=131), use flash (=222), or use a tripod. zz See “Minimizing Blurred Photos” on =70. I cannot lock the focus and recompose the shot.
Troubleshooting The maximum burst during continuous shooting is lower. zz If you shoot a subject that has fine detail such as a field of grass, the file size will be larger, and the actual maximum burst may be lower than the number listed on =583. Even after I change the card, the maximum burst displayed for continuous shooting does not change. zz The maximum burst displayed does not change when you switch cards, even if you switch to a high-speed card.
Troubleshooting ISO 100 cannot be set. ISO speed expansion cannot be selected. zz Check the [ISO speed range] setting under [z: zISO speed settings]. zz When [z: Highlight tone priority] is set to [Enable] or [Enhanced], the available ISO speed range is ISO 200–40000 for still photo shooting. Even if you set [ISO speed range] under [z: ISO speed settings] to expand the setting range, you cannot select L (equivalent to ISO 50), H1 (equivalent to ISO 51200), or H2 (equivalent to ISO 102400).
Troubleshooting Using flash in or mode lowers the shutter speed. zz Under [z: External Speedlite control], set [Slow synchro] to [1/1801/60sec. auto] or [1/180 sec. (fixed)] (=224). The flash does not fire. zz Make sure the flash is securely attached to the camera. The flash always fires at full output. zz Flash units other than EL/EX series Speedlites used in autoflash mode always fire at full output (=221).
Troubleshooting High-speed sync cannot be set in or mode. zz Under [z: External Speedlite control], set [Slow synchro] to [1/18030sec. auto] or [1/180-1/60sec. auto] (=224). Remote control shooting is not possible. zz When taking still photos, set the drive mode to or (=209). When recording movies, set [z: Remote control] to [Enable] (=285). zz Check the position of the remote control’s release timing switch. zz If you are using Wireless Remote Control BR-E1, see =217 or =399.
Troubleshooting Movie recording stops by itself. zz If the card’s writing speed is slow, movie recording may stop automatically. For cards that can record movies, see =585. To find out the card’s writing speed, refer to the card manufacturer’s website, etc. zz If you shoot a movie for 29 min. 59 sec., the movie recording will stop automatically. The ISO speed cannot be set for movie recording. zz In shooting modes other than [M], the ISO speed is set automatically.
Troubleshooting The exposure changes during movie recording. zz If you change the shutter speed or aperture during movie recording, the changes in the exposure may be recorded. zz Shooting a few test movies is recommended if you intend to perform zooming during movie recording. Zooming as you record movies may cause exposure changes or lens sounds to be recorded, an uneven audio level, or loss of focus. The image flickers or horizontal stripes appear during movie recording.
Troubleshooting Problems with Wireless Features Cannot pair with a smartphone. zz Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. zz Turn on Bluetooth from the smartphone settings screen. zz Pairing with the camera is not possible from the smartphone’s Bluetooth settings screen. Install the dedicated app Camera Connect (free of charge) on the smartphone (=420).
Troubleshooting Cannot reconnect to a smartphone. zz Even with a combination of the same camera and smartphone, if you have changed the settings or selected a different setting, reconnection may not be established even after selecting the same SSID. In this case, delete the camera connection settings from the Wi-Fi settings on the smartphone and set up a connection again. zz A connection may not be established if Camera Connect is running when you reconfigure connection settings.
Troubleshooting Display Problems The menu screen shows fewer tabs and items. zz In Basic Zone modes, some tabs and items are not displayed. Tabs and items on the menu screen also vary for still photos and movies. The display starts with [9] My Menu, or the [9] tab alone is displayed. zz [Menu display] on the [9] tab is set to [Display from My Menu tab] or [Display only My Menu tab]. Set [Normal display] (=552). The file name’s first character is an underscore (“_”). zz Set [z: Color space] to [sRGB].
Troubleshooting The shooting date and time displayed are incorrect. zz Make sure the correct date and time are set (=374). zz Check the time zone and daylight saving time (=374). The date and time are not in the image. zz The shooting date and time do not appear in the image. The date and time are recorded in the image data as shooting information. When printing, you can imprint the date and time in the picture, using the date and time recorded in the shooting information (=318). [###] is displayed.
Troubleshooting Playback Problems Part of the image blinks in black. zz [3: Highlight alert] is set to [Enable] (=351). A red box is displayed on the image. zz [3: AF point disp.] is set to [Enable] (=352). During image playback, the AF points are not displayed. zz The AF points are not displayed when the following types of images are played back: Images captured in <8: F> or <8: G> mode. Images taken with Multi Shot Noise Reduction applied. Cropped images.
Troubleshooting Operation sound and mechanical sound can be heard during movie playback. zz If you operate the camera’s dials or lens during movie recording, the operation sound will also be recorded. Using the Directional Stereo Microphone DM-E1 (sold separately) is recommended (=258). The movie appears to freeze momentarily. zz If there is a drastic change in the exposure level during autoexposure movie recording, the recording will stop momentarily until the brightness stabilizes.
Troubleshooting My card reader does not recognize the card. zz Depending on the card reader used and the computer’s operating system, SDXC cards may not be correctly recognized. In this case, connect your camera to the computer with the interface cable, then import the images to the computer using EOS Utility (EOS software). The image cannot be resized. zz With this camera, you cannot resize JPEG b and RAW images (=339). The image cannot be cropped. zz With this camera, you cannot crop RAW images (=337).
Troubleshooting Sensor Cleaning Problems The shutter makes a sound during sensor cleaning. zz Under [5: Sensor cleaning], when you select [Clean nowf], the shutter will make a mechanical sound during the cleaning, but no picture will be recorded to the card (=382). Automatic sensor cleaning does not work. zz If you repeatedly turn the power switch <1> and <2> within a short time period, the icon may not be displayed (=46). Computer Connection Problems I cannot import images to a computer.
Error Codes (1) If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. (1) (2) Error number Cause and countermeasures (2) Number 01 02 Error Message and Solution Communication between the devices is faulty. Check the camera, lens, or mount adapter contacts. Clean the electrical contacts on the camera, lens, and mount adapter, use a genuine Canon lens, or reinsert the battery (=30, =42). Card cannot be accessed.
Performance Data Still Photo Shooting zzNumber of Possible Shots Temperature Room Temperature (23°C / 73°F) Low Temperature (0°C / 32°F) Possible shots Approx. 250 shots Approx. 240 shots • Based on using the screen and a fully charged Battery Pack LP-E17, and following CIPA (Camera & Imaging Products Association) testing standards.
Performance Data zzGuide to Image Quality Settings Image Quality Pixels Recorded File Size (MB) (Approx.) Maximum Burst Possible Shots Standard High Speed 9.1 3320 Full Full 4.9 6060 Full Full 5.1 5820 Full Full 2.9 10280 Full Full 3.4 8750 Full Full 2.0 14620 Full Full 1.9 15760 Full Full JPEG 73 26M 83 74 84 7a 8a 12M 6.5M 3.8M b RAW 1 26M 29.1 1040 50 Full F 26M 17.1 1780 130 Full 1 73 26M 26M 29.1+9.1 790 42 98 F 73 26M 26M 17.1+9.
Performance Data zzPixel Count When Still Photo Cropping/Aspect Ratio is Set (Approx. pixels) Image Quality Full-frame (3:2) 1.6x (crop) 3/1/F 6240×4160 (Approx. 26.0 megapixels) 3888×2592 (Approx. 10.1 megapixels) a 4160×2768* (Approx. 11.5 megapixels) – a 3120×2080 (Approx. 6.5 megapixels) – b 2400×1600 (Approx. 3.8 megapixels) 2400×1600 (Approx. 3.8 megapixels) Image Quality 1:1 (aspect ratio) 4:3 (aspect ratio) 16:9 (aspect ratio) 3/1/F 5536×4160* 6240×3504* 4160×4160 (Approx. 17.
Performance Data Movie Recording zzCards that Can Record Movies Movie Recording Size H L w SD Card X UHS-I, UHS Speed Class 3 or higher 87 X SD Speed Class 10 or higher 65 X 45 HDR movie 65 V 87 65 X SD Speed Class 4 or higher • When movie cropping and Movie digital IS are disabled. • This table indicates the card’s writing and reading speeds required for recording movies (card performance requirements).
Performance Data zzTotal Movie Recording Time and File Size Per Minute Movie Recording Size Total Possible Recording Time on Card 8 GB 32 GB 128 GB (Approx.) File Size 45 X 8 min. 35 min. 2 hr. 20 min. 869 MB/min. 87 X 17 min. 1 hr. 09 min. 4 hr. 37 min. 440 MB/min. L 65 X 5 HDR movie 33 min. 2 hr. 15 min. 9 hr. 01 min. 225 MB/min. H 1 hr. 26 min. 5 hr. 47 min. 23 hr. 11 min. 87 MB/min. 87 X 38 min. 2 hr. 34 min. 10 hr. 19 min. 196 MB/min. 65 X 1 hr. 13 min. 4 hr.
Performance Data zzTotal Possible Time for Time-lapse Movie Recording Time-lapse Movie Recording Interval 2 sec. 10 sec. Screen Auto Off Room Temperature (23°C / 73°F) (Approx.) Low Temperature (0°C / 32°F) Disable Approx. 2 hr. 40 min. Approx. 2 hr. 30 min. Enable Approx. 2 hr. 50 min. Approx. 2 hr. 40 min. Disable Approx. 2 hr. 20 min. Approx. 2 hr. 10 min. Enable Approx. 4 hr. 40 min. Approx. 4 hr. 30 min. • With a fully charged Battery Pack LP-E17.
Performance Data ISO Speed in Movie Recording In [k] Mode zz For Full HD/HD movies, ISO speed is automatically set in a range of ISO 100–25600. zz For 4K movies, ISO speed is automatically set in a range of ISO 100– 12800. zz Under [z: kISO speed settings], setting [Max for Auto] or [H Max for Auto] to [H2(102400)] (=286) expands the maximum limit of the automatic ISO speed setting range to H2 (equivalent to ISO 102400). You can lower the maximum value to narrow the automatic ISO speed setting range.
Performance Data In [M] Mode zz For Full HD/HD movies with ISO speed set to [AUTO], ISO speed is automatically set in a range of ISO 100–25600. zz For 4K movies with ISO speed set to [AUTO], ISO speed is automatically set in a range of ISO 100–12800. zz When setting ISO Auto, setting [Max for Auto] or [H Max for Auto] under [z: kISO speed settings] to [H2(102400)] (=286) expands the maximum limit of the automatic ISO speed setting range to H2 (equivalent to ISO 102400).
Performance Data Image Playback zzResize Options by Original Image Quality Available Resize Settings Original Image Quality 4 a 3* k k k k k 4 b k a * Only b is available for images shot with [z: zCropping/aspect ratio] set to [1.6x (crop)]. zzSize for Resized Images (Approx. pixels) Image Quality Full-frame (3:2) 1.6x (crop) 4 4160×2768* (Approx. 11.5 megapixels) – a 3120×2080 (Approx. 6.5 megapixels) – b 2400×1600 (Approx. 3.8 megapixels) 2400×1600 (Approx. 3.
Information Display Still Photo Shooting Screen Each time you press the button, the information display will change. zz Viewfinder display positions vary for some items. zz The display will show only the settings currently applied. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (1) (2) (3) Movie recording time available Maximum burst Possible shots/Sec.
Information Display (25) (26) (27) (28) (29) (35) (36) (37) (30) (31) (32) (38) (39) (40) (41) (33) (34) (25) Flash ready/FE Lock/High-speed sync (26) Wi-Fi signal strength (27) Wi-Fi function (28) Touch Shutter (29) AE lock (30) Shutter speed/Multi-function lock warning (31) Bluetooth function (32) Aperture (42) (33) (34) (35) (36) (37) (38) (39) (40) (41) (42) Flash exposure compensation Exposure level indicator Focus distance display Magnify button ISO speed Highlight tone priority Exposure simula
Information Display Movie Recording Screen Each time you press the button, the information display will change. zz Viewfinder display positions vary for some items. zz The display will show only the settings currently applied.
Information Display (21) (22) (28) (29) (30) (23) (24) (25) (26) (27) (21) Sound-recording level indicator (manual) (22) Wi-Fi function (23) AE lock (24) Shutter speed (25) Aperture (26) Wi-Fi signal strength (27) Bluetooth function (31) (32) (33) (28) (29) (30) (31) (32) (33) Exposure level indicator GPS acquisition status ISO speed Highlight tone priority Exposure compensation Focus distance display oo You can set what is displayed for when you press the button (=388).
Information Display Scene Icons In the shooting mode, the camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen.
Information Display *4: Displayed when all the following conditions apply: The shooting scene is dark, it is a night scene, and the camera is mounted on a tripod. *5: Displayed with any of the lenses below: • EF300mm f/2.8L IS II USM • EF400mm f/2.8L IS II USM • EF600mm f/4L IS II USM • EF500mm f/4L IS II USM • Image Stabilizer lenses released in and after 2012. *4+*5: If the conditions in both *4 and *5 are met, the shutter speed will slow down.
Information Display Playback Screen zzBasic information display for still photos (1) (2) (3) (4) (5) (6) (7) (8) (1) (2) (3) (4) (8) (9) (10) (11) (12) (5) (6) (7) (13) (14) (15) Wi-Fi function Wi-Fi signal strength Battery level Playback No.
Information Display zzDetailed information display for still photos (8) (1) (9) (10) (11) (12) (13) (14) (15) (2) (3) (4) (16) (5) (6) (7) (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Aperture Shutter speed Shooting mode/Multiple exposure White balance Auto Lighting Optimizer White balance correction Picture Style/Settings Exposure compensation amount Shooting date and time Histogram (Brightness/RGB) (17) (11) (12) (13) (14) ISO speed Highlight tone priority Scroll bar Flash exposure compensation/ Bou
Information Display zzDetailed information display for movies (1) (2) (6) (3) (4) (5) (1) (2) (3) (4) Movie playback Movie recording mode/Time-lapse movie/Video snapshot Image size Frame rate (7) (8) (5) (6) (7) (8) Compression method Movie digital IS Recording time Movie recording format * will be displayed for still photos taken as test shots for time-lapse movies. oo During movie playback, “*, *” will be displayed for [Fineness] and [Threshold] of [Picture Style]’s [Sharpness].
Trademarks oo Adobe is a trademark of Adobe Systems Incorporated. oo Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. oo Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. oo SDXC logo is a trademark of SD-3C, LLC. oo HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.” * Notice displayed in English as required.
Use of Genuine Canon Accessories Is Recommended This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery).
Only for European Union and EEA (Norway, Iceland and Liechtenstein) These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation implementing those Directives.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Index Numbers 1-point AF : 188, 193 [4K] 3840×2160 (Movie) : 249 ALL-I : 265 Ambience priority (AWB) : 142 Anti-flicker shooting : 179 4K frame capture : 306 Aperture-priority AE : 100 A (Scene Intelligent Auto) : 68 Area AF frame : 80, 81, 192 Acceleration/deceleration tracking : 531 Aspect ratio → Still photo cropping/ Access lamp : 43 aspect ratio Accessories : 3 Attenuator : 258 Adobe RGB : 147 Autofocus → AF AEB (Auto Exposure Bracketing) : 129 Auto Lighting Optimizer : 136 AE loc
Index Bulb timer : 107 BUSY : 118 Contrast : 136, 153 Control ring : 58 Copyright information : 411 C // (Custom shooting) : 408 Camera Camera vibration blur : 107, 210 Default settings : 410 Holding the camera : 53 Camera shake : 54, 70 Creative Assist : 73, 331 Creative Zone : 35 Cropping (images) : 337 Custom Functions : 523 Customize buttons : 538 Custom shooting mode : 408 Custom white balance : 143 Card requirements : 253, 585 D Cards : 10, 30, 42 Date/time : 374 Card reminder : 1
Index E Flash (Speedlite) : 220 Custom Functions : 230 Eco mode : 371 FEB (Flash Exposure Bracketing) : Electronic level : 388 229 Erasing (images) : 314 FE lock : 220 Err (error codes) : 581 Flash control (function settings) : 222 Evaluative metering : 211 Flash exposure compensation : 220, exFAT : 254, 368 229 Expanded ISO speed : 131, 133, 286, Flash sync speed : 221 588 Manual flash : 226 Exposure compensation : 129 Safety FE : 225 Exposure compensation in M mode with Shutter synch
Index Group Photo : 78 Continuous (file numbering) : 364 Erasing : 314 H File numbering : 363 H1/H2 (Expanded ISO speed) : 133 Highlight alert : 351 Handheld night scene : 87 Histogram : 349 [HD] 1280×720 (Movie) : 249 Importing (to computer) : 556 HDMI : 290, 308, 386 Index display : 300 HDMI HDR : 387 Jump display (image browsing) : 347 HDMI output : 290 Magnifying images : 299 HDR Backlight Control : 88 Manual reset : 365 HDR movie recording : 247 Manual rotation : 313 HDR shooting :
Index Maximum burst : 118, 583 K Kids : 81 Medium (image quality) : 116 L Menu : 60 Memory cards → Cards Landscape : 79 Custom Functions : 524 Language : 377 Dimmed menu items : 63 Large (image quality) : 116 Function settings : 358 Lens : 48, 50 Movie shooting : 236 Chromatic aberration correction : 126, My Menu : 548 330 Playback : 294 Diffraction correction : 126, 330 Setting procedure : 61 Digital Lens Optimizer : 125, 329 Still photo shooting : 111 Distortion correction : 124, 32
Index Editing : 304 Editing out first and last scenes : 304 External microphone : 258 File size : 254, 586 N Night Portrait : 86 Noise reduction High ISO speed : 157 Frame Grab : 306 Frame rate : 252 HDMI output : 290, 386 HDR movie recording : 247 Headphones : 258 Long exposures : 159 Non-Canon flash units : 221 Normal (Image quality) : 116 NTSC : 252, 378 Information display : 593 O Manual exposure shooting : 241 One-Shot AF : 186 Microphone : 258 Orientation linked AF point : 534 Movie digital
Index Power saving : 372 Scene icons : 72, 595 P (Program AE) : 96 Scene Intelligent Auto : 68 Pressing completely : 54, 395 (Special scene) : 34, 75 Pressing halfway : 54, 395 Screen : 30, 45 Printing Photobook set-up : 322 Print order (DPOF) : 318 Program AE : 96 Program shift : 97 Protecting images : 310 Q [Q] (Quick Control) : 65 Quick Control : 65 Quick control dial : 57 R Angle adjustment : 45 Brightness : 373 SD/SDHC/SDXC cards → Cards Second-curtain synchronization : 228 Self-timer
Index Shutter-priority AE : 98 Troubleshooting : 562 Shutter synchronization : 228 TV display : 308 Silent mode : 89 Tv (Shutter-priority AE) : 98 Single-image display : 296 Single shooting : 206 Slide show : 343 Small (image quality) : 116 Software : 554 Instruction Manual : 555 U UHS-II/UHS-I : 10 USB (digital) terminal : 32, 556 UTC (Coordinated Universal Time) : 406 V Sound recording/Sound-recording level : Video snapshots : 274 257 Video system : 378 Speaker : 33 Viewfinder Special scen
Index Clearing wireless communication Virtual keyboard : 517 settings : 498 Wi-Fi settings : 516 Connection history : 493, 516 WPS (Wi-Fi Protected Setup) : 488 Edit device information : 450, 496 Wind filter : 257 EOS Utility : 453 Wireless communication settings : 398, Erase connection information : 497 415 Image Transfer Utility 2 : 458 iOS : 420 IP address : 518 Z Zone AF : 189, 193 MAC address : 499 Network : 434, 454, 462 Network settings : 514 Nickname : 497 Notes : 511 Pairing : 422 Pa
CANON INC. 30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Europe, Africa & Middle East CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands For your local Canon office, please refer to your warranty card or to www.canon-europe.com/Support The product and associated warranty are provided in European countries by Canon Europa N.V. The descriptions in this Instruction Manual are current as of October 2018.