Advanced User Guide

168
Chapters Contents
Index to Features Index
Chapters Contents
Index to Features Index
Multiple Exposures
Merging Multiple Exposures with an Image Recorded on the
Card
You can select a RAW image recorded on the card as the rst single
exposure. The image data of the selected RAW image will remain intact.
Only
1
or
F
images can be used. JPEG images cannot be
selected. Images you can specify also vary depending on the lens attached.
For details, see the table below.
1
Select [Select image for multi.
expo.].
2
Select the rst image.
z
Use the <
Y
> <
Z
> keys to select the
rst image, then press <
0
>.
z
Select [OK].
g
The le number of the selected image
will be displayed at the bottom of the
screen.
3
Take the picture.
z
When you select the rst image, the
number of remaining exposures as set
with [No. of exposures] will decrease
by 1.
z
Images You Can Select
Lens Attached
Cropped
Shooting
Selectable Images
RF/
EF lens
Off RAW images captured at full size
On
RAW images from cropped shooting or taken with an
EF-S lens
EF-S lens –
o
These images cannot be selected as the rst single exposure: Images
captured with [
z
: Highlight tone priority] set to [Enable] or [Enhanced], or
images captured with [
z
:
z
Cropping/aspect ratio] not set to [Full-frame]
or [1.6x (crop)].
o
[Disable] is applied for [
z
: Lens aberration correction] and [
z
: Auto
Lighting Optimizer] regardless of the settings of the image selected as the
rst single exposure.