Advanced User Guide
223
Chapters Contents
Index to Features Index
Chapters Contents
Index to Features Index
Setting the Flash Function
Flash Firing
To enable ash photography, set to
[Enable]. To disable ash ring or enable
only the AF-assist beam, set to [Disable].
Otherwise, when a Speedlite that supports auto ash ring is attached, the
automatic ring is performed according to the shooting conditions.
For detailed shooting instructions, refer to the instruction manual of
Speedlites supporting auto ash ring.
E-TTL II Flash Metering
For normal ash exposures, set it to
[Evaluative]. If [Average] is set, the ash
exposure will be averaged for the entire
metered scene.