Advanced User Guide
230
Chapters Contents
Index to Features Index
Chapters Contents
Index to Features Index
Setting the Flash Function
Flash Custom Function Settings
For details on the Speedlite’s Custom Functions, refer to the Speedlite’s (sold
separately) Instruction Manual.
1
Select [Flash C.Fn settings].
2
Set the desired functions.
z
Select the number.
z
Select an item.
o
With an EL/EX series Speedlite, the Speedlite will always re at full output if
the [Flash metering mode] Custom Function is set to [TTL] (autoash).
o
The Speedlite’s Personal Function (P.Fn) cannot be set or canceled on the
camera’s [
z
: External Speedlite control] screen. Set it directly on the
Speedlite.
Clearing Flash Function Settings / Flash C.Fn Settings
1
Select [Clear settings].
2
Select the settings to be cleared.
z
Select [Clear ash settings] or [Clear
all Speedlite C.Fn’s].
z
On the conrmation dialog, select [OK].
Then the ash settings or Custom
Function settings will all be cleared.