Advanced User Guide
569
Chapters Contents
Index to Features Index
Chapters Contents
Index to Features Index
Troubleshooting
Using ash in <
f
> or <
d
> mode lowers the shutter speed.
z
Under [
z
: External Speedlite control], set [Slow synchro] to [1/180-
1/60sec. auto] or [1/180 sec. (xed)] (
=
224).
The ash does not re.
z
Make sure the ash is securely attached to the camera.
The ash always res at full output.
z
Flash units other than EL/EX series Speedlites used in autoash mode
always re at full output (
=
221).
z
When the ash Custom Function setting for [Flash metering mode] is
set to [TTL] (autoash), the ash will always re at full output (
=
230).
Flash exposure compensation cannot be set.
z
If ash exposure compensation is already set with the Speedlite, ash
exposure compensation cannot be set with the camera. When the
external Speedlite’s ash exposure compensation is canceled (set to 0),
ash exposure compensation can be set with the camera.