Instruction Manual

73
The AF point is used for focusing. The AF point can be selected
automatically by the camera or manually by you.
In Basic Zone modes and the <88
88
> mode, the AF point is selected
automatically. In the <d> <s> <f> <a> modes, you can switch
between automatic and manual AF point selection.
The camera selects the AF point automatically to suit the shooting
conditions. All the AF points <
.
> in the viewfinder will light in red.
You can select any of the seven AF points manually. This is best
when you want to focus a particular subject, or autofocus quickly while
composing the shot.
1
Press the <S> button. (9)
s
The selected AF point will be
displayed in the viewfinder and on the
LCD panel.
2
Select the AF point.
¡ Press the <S> key while looking in
the viewfinder or at the LCD panel.
s Press the < U > key to select a
horizontal AF point, or press the < V >
key to select a vertical AF point.
¡ By pressing <0>, you can toggle
between the center AF point and
automatic AF point selection.
¡ To return to shooting, press the
shutter button halfway or press the
<S> button again.
S Selecting the AF PointN
Automatic AF Point Selection
Manual AF Point Selection
<S> Selecting with the Cross Keys
Automatic AF point selection
Automatic AF point selection
Automatic AF point selection
Automatic AF point selection