User's Manual

Table Of Contents
Mak
e sure to hold the paper drawer with both hands, and pull it out gently. Otherwise, you may damage
the paper drawer by dropping it, if it slides out too easily.
2
Adjust the positions of the paper guides to the paper size you want to use.
While pr
essing the lock release lever, move the paper guide to align the projection to the appropriate paper
size marking.
3
Load the paper so that the edge of the paper stack is aligned against the paper guide
on the rear side of the paper drawer.
Load the paper with the print side face do
wn.
Fan the paper stack well, and tap it on a at surface to align the edges of the paper stack.
Do not exceed the load limit line when loading paper
Mak
e sure that the paper stack does not exceed the load limit line (
). Loading too much paper can
cause paper jams.
When loading paper with a logo, see Loading Preprinted Paper(P. 139) .
4
Insert the paper drawer into the machine.
When you insert the paper dr
awer with <Notify to Check Paper Settings> set to <On>, a conrmation screen
is displayed.
<Notify to Check Paper Settings>(P. 392)
Basic Operations
130